LIGO Document D047932-v2
- Part of Locker Assembly, used in the HAM ISI. Provides interface for 2-position Locker Sleeve. Spinning the Locker Sleeve into/out of this part unlocks/locks the Locker Pin on the other stage.
Initial design by Alliance Spacesystems, Inc. (ASI).
- Release for Advanced LIGO procurement.
Changes from Enhanced LIGO version include:
1. Changed height, to match latest Locker Base.
2. Removed vent groove and replaced with 2x vent holes.
3. Replaced 3/8"-16 tapped holes with Heli-Coils.
4. Added chamfers and c'sinks.
5. Minor changes to tolerances, to reflect HPD red-lines (so the Sleeve will not bind up).
DCC Version 3.3.0, contact
Document Database Administrators