RGA Test Results: A-OSEM Circuit Board Sub-Assembly (223 units)

Document #:

LIGO-E1000376-v1

Document type:

E - Engineering documents

Abstract:

A large quantity (223) of the circuit board sub-assembly of the A-OSEM assembly (D0901065) was vacuum baked (120C) and RGA tested as part of the aLIGO production run. The results are given here.

These flex circuit assemblies were cleaned as follows:
1. Wash 10 min. in sonic bath with Isopropyl alcohol.
2. Change the alcohol and agitate or stir for 2 to 3 min.
3. Let dry over night.
4. Vacuum Bake at 120C for 48Hrs

Files in Document:

• E1000376-v1 RGA results for A-OSEM circuit board sub-a...pdf (17.8 kB)

Other Files:

• C83010 aLIGO AOSEM Flex Circuit Bd, devices, connector...txt (4.2 kB)
• C83010 aLIGO AOSEM Flex Circuit Bd, devices, connector...txt (22.7 kB)
• C83010-ALIGO-AOSEM-FLEX-CIRCUITBOARDS-CAL.EMF (26.3 kB)
• C83010-ALIGO-AOSEM-FLEX-CIRCUITBOARDS.EMF (23.1 kB)
• C83010-ALIGO-OSEM-FLEX-Circuitboards-cal.rga (20.1 kB)
• C83010-ALIGO-OSEM-FLEX-Circuitboards.rga (22.9 kB)
• E1000376-v1 RGA results for A-OSEM circuit board sub-a...xls (160.5 kB)
• P1030950.JPG (1.7 MB)
• P1030951.JPG (1.8 MB)

Topics:

• System Engineering
• Vacuum
• Suspensions
• Incoming Inspection

Authors:

• Dennis Coyne
• Bob Taylor

Related Documents:

• LIGO-E1000375: RGA Test Results: A-OSEM Assemblies (quantity = first 7 production units; ICS bake 324)
• LIGO-D0901065: AOSEM Assembly

Referenced by:

• LIGO-E1000375-v1: RGA Test Results: A-OSEM Assemblies (quantity = first 7 production units; ICS bake 324)