LIGO Document E1100057-x0

DCN - HLTS Wire Jigs - Production Version

Document #:
LIGO-E1100057-x0
Document type:
E - Engineering documents
Abstract:
This is a Document Change Notice (DCN) for production versions of the HLTS Wire Jig part and assembly drawings.
Files in Document:
None
Authors:
Keywords:
DCN SUS HLTS wire jig
Notes and Changes:
Upper Wire Jig:
D0900594-v2: Revised to separate wire clamping from attachment to Base Plate.
D0900595-v2: Revised to separate wire clamping from attachment to Base Plate. Added additional notes (all surfaces must be machined, refer to metal component spec.).
D0900596-v2: Added additional notes (all surfaces must be machined, refer to metal component spec.).
D0900597-v2: Added additional notes (all surfaces must be machined, refer to metal component spec.).
D0900603-v2: Revised to separate wire clamping from attachment to Base Plate. Added additional notes (all surfaces must be machined, refer to metal component spec.).
D020380-v2: Added additional notes (all surfaces must be machined, refer to metal component spec.).
D980184-v2: Added additional notes (all surfaces must be machined, refer to metal component spec.).

Intermediate Wire Jig:
D0900630-v2: Revised to separate wire clamping from attachment to Base Plate. Resized Wire Clamp Mount to accomodate correct lengths of helicoils.
D0900633-v2: Revised to separate wire clamping from attachment to Base Plate. Added additional notes (all surfaces must be machined, refer to metal component spec.).
D0900631-v2: Added additional notes (all surfaces must be machined, refer to metal component spec.).
D0900632-v2: Resized to accomodate correct lengths of helicoils and added additional notes (all surfaces must be machined, refer to metal component spec.).
D0900634-v2: Revised to separate wire clamping from attachment to Base Plate. Added additional notes (all surfaces must be machined, refer to metal component spec.).

Lower Loop Wire Jig:
D0901419-v2: Revised to separate wire clamping from attachment to Base Plate.
D0901433-v2: Revised to separate wire clamping from attachment to Base Plate and added additional notes (all surfaces must be machined, refer to metal component spec.).
D0901435-v3: Revised to separate wire clamping from attachment to Base Plate and added additional notes (all surfaces must be machined, refer to metal component spec.).
D0901436-v2: Added additional notes (all surfaces must be machined, refer to metal component spec., helicoil holes).

Prism Gluing Test Mass:
D1100246-v1: Initial release of simplified Metal Bottom Mass for use in testing the Sapphire Prism Bonding Jig and for practice in gluing sapphire prisms to optics.

DCC Version 3.2.2, contact Document Database Administrators