| LIGO-Number |
Title |
Author(s) |
Topic(s) |
Last Updated |
| D1002704-v7 |
Rack and Cable Tray Layout_LVEA_H1 |
Dennis Coyne et al. |
Observatory Facilities
System Engineering
|
28 Aug 2024 |
| D1002545-v3 |
aLIGO TCS Simplified Ring Heater Element Standoff |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Final Design
|
07 Mar 2011 |
| E1100530-v10 |
PSL/IO/TCS Beckhoff (Slow Controls) Chassis Cabling/Wiring Diagram |
Jose Puente et al. |
State Control and Monitoring
Laser Systems
Installation
|
16 Aug 2024 |
| E2000499-v4 |
Modifications to the Beckhoff chassis |
Daniel Sigg |
State Control and Monitoring
|
07 Aug 2024 |
| D1100683-v11 |
EtherCAT System Diagram |
Daniel Sigg |
State Control and Monitoring
|
06 Aug 2024 |
| E1200374-x0 |
aLIGO, Slow Controls, Chassis, Corner 4 |
Daniel Sigg |
State Control and Monitoring
|
06 Aug 2024 |
| E1200205-x0 |
aLIGO, Slow Controls, Concentrators |
Daniel Sigg |
State Control and Monitoring
|
05 Aug 2024 |
| D1100692-v1 |
Slow controls concentrator interface: demodulator |
Daniel Sigg |
Sensing and Control
|
25 Jul 2024 |
| D060218-v2 |
BOSEM |
Betsy Weaver et al. |
Suspensions
Preliminary Design
|
28 Jul 2020 |
| E0900023-v14 |
PROCESS FOR MANUFACTURING CANTILEVER SPRING BLADES FOR AdvLIGO |
Douglas Cook et al. |
Basic R&D
System Engineering
|
27 Oct 2021 |
| D070157-v1 |
eLIGO OMC InGaAs Q3000 QPD Mounting Plate and Connector |
Charles Osthelder |
Data Acquisition System
|
30 May 2024 |
| D0900506-v6 |
aLIGO Systems BSC5-L1, Top Level Chamber Assembly |
Ignacio Romero |
System Engineering
Final Design
|
11 Jun 2018 |
| D1002602-v5 |
aLIGO ISC InGaAs-Q3000 QPD Flexible Circuit Board |
Rich Abbott |
Fabrication
Sensing and Control
|
14 May 2024 |
| D071165-v2 |
Sensor Target |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D0900492-v5 |
aLIGO Systems, BSC3-L1 Top Level Chamber Assembly |
Ignacio Romero |
System Engineering
Final Design
|
12 Jul 2012 |
| D0900471-v5 |
aLIGO Systems, BSC4-L1 Top Level Chamber Assembly |
Ignacio Romero |
System Engineering
Final Design
|
23 Jan 2014 |
| D0900605-v5 |
Low Noise Voltage Controlled Oscillator (VCO) Assembly |
Daniel Sigg |
Sensing and Control
|
10 Apr 2024 |
| T2300288-v1 |
Implementing Nonlinear Control in a Classical Experiment to Reduce Measurement Noise |
Andrei Diaconu et al. |
State Control and Monitoring
Machine Learning
|
03 Apr 2024 |
| F0900007-v1 |
Document Change Notice (DCN) template. |
Dennis Coyne |
System Engineering
|
15 Mar 2024 |
| D1700308-v10 |
Squeezer In-vacuum Controls Wiring Chain |
Rich Abbott et al. |
Squeezer
|
16 Oct 2020 |
| E0900041-v6 |
Advanced LIGO Input Test Mass Coating Specification |
Gregg Harry |
Core Optics
Requirements
Final Design
|
12 Mar 2024 |
| E0900068-v5 |
Advanced LIGO End Test Mass (ETM) Coating Specification |
Rand Dannenberg |
Core Optics
Final Design
|
12 Mar 2024 |
| E080031-v1 |
MIRROR BLANK MATERIAL, AdLIGO ITM MIRROR |
GariLynn Billingsley et al. |
Core Optics
Fabrication
Final Design
|
11 Mar 2024 |
| E080047-v1 |
Mirror Blank Material, AdLIGO ETM Mirror Specification |
GariLynn Billingsley et al. |
Core Optics
Fabrication
Final Design
|
11 Mar 2024 |
| D0900609-v3 |
Low Noise Voltage Controlled Oscillator: Oscillator Source |
Daniel Sigg |
Sensing and Control
|
06 Mar 2024 |
| E030350-v5 |
Configuration Control & Drawing Requirements |
Calum Torrie et al. |
System Engineering
|
06 Mar 2024 |
| E1200225-v8 |
Coding Standard for TwinCAT Slow Controls Software |
Daniel Sigg |
State Control and Monitoring
|
05 Mar 2024 |
| E2300329-v1 |
Squeezer Controls Chassis 5 Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
01 Mar 2024 |
| D1001679-v6 |
aLIGO TCS Upper Monolithic Ring Heater Shield |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
|
02 Jun 2023 |
| C1106833-v2 |
SOW LHO Landscape Maintenance and Tumbleweed Removal |
John Worden et al. |
Observatory Facilities
Operations Business
|
11 Sep 2015 |
| D0900428-v8 |
aLIGO Systems, LBSC2-L1 Top Level Chamber Assembly |
Eduardo Sanchez et al. |
System Engineering
Final Design
|
04 Dec 2023 |
| E2100047-v3 |
Squeezer Controls Chassis 4 Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
15 Nov 2023 |
| E1600386-v5 |
Squeezer Controls Chassis 3 Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
15 Nov 2023 |
| D1600509-v5 |
EtherCAT Squeezer Chassis 3 |
Daniel Sigg |
State Control and Monitoring
|
15 Nov 2023 |
| E1600384-v4 |
Squeezer Controls Chassis 2 Wiring Diagram |
Daniel Sigg et al. |
State Control and Monitoring
|
15 Nov 2023 |
| D1600507-v2 |
EtherCAT Squeezer Chassis 2 |
Daniel Sigg |
State Control and Monitoring
|
15 Nov 2023 |
| D070441-v6 |
HLTS Prism Breakoff, Lower Wire, Optic |
Calum Torrie et al. |
Suspensions
Final Design
|
14 Nov 2023 |
| D0810033-v4 |
HSTS LOWER MASS PRIMARY PRISM |
Calum Torrie |
Suspensions
Final Design
|
14 Nov 2023 |
| D1001680-v5 |
aLIGO TCS Lower Monolithic Ring Heater Shield |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
|
04 Mar 2011 |
| T2300147-v2 |
LIGO Seismic State Characterization using Machine Learning Techniques |
Isaac Kelly et al. |
State Control and Monitoring
Machine Learning
|
30 Oct 2023 |
| D040469-v1 |
RF Summing Box |
Daniel Sigg |
Laser Systems
|
24 Oct 2023 |
| D1600511-v10 |
SQZ R1 |
Daniel Sigg |
Squeezer
|
23 Oct 2023 |
| E960050-v12 |
LIGO Vacuum Compatible Materials List |
Dennis Coyne |
Fabrication
Vacuum
Final Design
|
07 Nov 2013 |
| E0900364-v10 |
Metal components intended for use in the Adv LIGO Vacuum System |
Dennis Coyne et al. |
System Engineering
|
02 Dec 2020 |
| D2300328-v1 |
Auxiliary Signals Concentrator 11 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
05 Oct 2023 |
| D2300327-v1 |
Auxiliary Signals Concentrator 11 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
05 Oct 2023 |
| E2300331-v1 |
Test Procedure for Auxiliary Signals Concentrator 11 |
Daniel Sigg |
State Control and Monitoring
|
05 Oct 2023 |
| D2300326-v1 |
Auxiliary Signals Concentrator 11 |
Daniel Sigg |
State Control and Monitoring
|
05 Oct 2023 |
| E080138-v2 |
Coated Substrate, ALIGO PRE-MODE MATCHING TELESCOPE MIRROR #2 |
Rodica Martin et al. |
Input Optics
Preliminary Design
|
05 Oct 2023 |
| D2300323-v1 |
EtherCAT Squeezer Chassis 5 |
Daniel Sigg |
State Control and Monitoring
|
04 Oct 2023 |
| D2300325-v1 |
Squeezer Controls Chassis 5 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
04 Oct 2023 |
| D2300324-v1 |
Squeezer Controls Chassis 5 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
04 Oct 2023 |
| D1101847-v5 |
aLIGO TCS HWS OPTO MECHANICAL LAYOUT, ITMX, L1 |
Aidan Brooks et al. |
Integration
Auxiliary Optics
Fabrication
System Engineering
Preliminary Design
Vacuum
Final Design
|
23 Oct 2019 |
| D1101846-v1 |
aLIGO TCS HWS Optics Assembly In Vacuum, L1 HAM4 |
Aidan Brooks et al. |
Integration
Auxiliary Optics
Fabrication
System Engineering
Preliminary Design
Vacuum
Final Design
|
24 May 2012 |
| D1101848-v1 |
aLIGO TCS HWS OPTO MECHANICAL LAYOUT, ITMY, L1 |
Aidan Brooks et al. |
Integration
Auxiliary Optics
Fabrication
System Engineering
Preliminary Design
Vacuum
Final Design
|
03 May 2012 |
| D080751-v4 |
Advanced LIGO, Suspension, ETM/ITM Test Mass, Production ear |
Marielle van Veggel |
Suspensions
Final Design
|
28 Sep 2023 |
| T1600605-v10 |
List of SQZ Photodetectors in Advanced LIGO |
Lisa Barsotti et al. |
Squeezer
|
22 Sep 2023 |
| D1600513-v4 |
SQZ-C1 LVEA Equipment Room Rack Layout |
Daniel Sigg |
Squeezer
|
22 Sep 2023 |
| E2300330-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 11 |
Daniel Sigg |
State Control and Monitoring
|
22 Sep 2023 |
| E2300328-x0 |
aLIGO, Slow Controls, Chassis, Squeezer 5 |
Daniel Sigg |
State Control and Monitoring
|
22 Sep 2023 |
| E1200204-x0 |
aLIGO, Slow Controls, EtherCAT Chassis |
Daniel Sigg |
State Control and Monitoring
|
22 Sep 2023 |
| F0900008-x0 |
LIGO Technical Note Template |
Dennis Coyne |
System Engineering
|
11 Feb 2009 |
| T040111-v1 |
Galling Tendencies and Particles Produced by Ultra Clean Screw Threads |
Michael Gerfen et al. |
Basic R&D
System Engineering
|
07 Sep 2023 |
| D047823-v5 |
D047823- L4C Vacuum Chamber top |
Fabrice Matichard |
Seismic Isolation
Final Design
|
30 Apr 2010 |
| D047822-v5 |
D047822 L4C chamber baseplate |
Fabrice Matichard |
Seismic Isolation
Final Design
|
30 Apr 2010 |
| E050262-v1 |
Test procedure for the Timing Slave Board Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
13 Mar 2009 |
| D1001715-v1 |
I/O EXPANSION CHASSIS - TOP ASSEMBLY DRAWING |
Emery Brown |
Data Acquisition System
Fabrication
|
16 Sep 2011 |
| D0901083-v12 |
aLIGO Systems, HAM2-H1 Top Level Chamber Assembly |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
22 Oct 2019 |
| D071462-v2 |
Asm, Position Sensor Target Face |
Andy Stein et al. |
Seismic Isolation
Final Design
|
03 Aug 2023 |
| D070101-v4 |
16 bit DAC AI Rear Interface Board |
Jay Heefner |
Other data analysis
Data and Computing
|
03 Aug 2023 |
| D060386-v1 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, MOUNT BLOCK, UI MASS FLAG MOUNT |
Joe ODell |
Suspensions
|
10 Aug 2009 |
| P080112-v6 |
Searches for Gravitational Waves from Known Pulsars with Science Run 5 LIGO Data |
Matthew Pitkin et al. |
Detector
Continuous Wave
|
12 Jul 2023 |
| D1001895-v7 |
aLIGO TCS Ring Heater Assembly, Lower Segment |
Giacomo Ciani et al. |
Auxiliary Optics
Fabrication
Vacuum
|
19 Jun 2013 |
| D1001838-v6 |
aLIGO TCS Ring Heater Assembly, Upper Segment |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
|
04 Jan 2013 |
| D1301017-v1 |
Arm Cavity Baffle (ACB) Photodiode (PD) Amplifier (preamp) |
Daniel Sigg |
Auxiliary Optics
State Control and Monitoring
|
06 Jul 2023 |
| M1000066-v29 |
LIGO Data Management Plan |
Stuart Anderson et al. |
Policies
NSF
Data and Computing
|
22 Jun 2023 |
| D1002544-v4 |
aLIGO TCS Simplified Ring Heater Element Connector, Right |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
31 Jan 2011 |
| D1002543-v4 |
aLIGO TCS Simplified Ring Heater Element Connector, Left |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
31 Jan 2011 |
| E960022-v25 |
LIGO Clean and Bake Methods and Procedures |
Betsy Weaver et al. |
Fabrication
Vacuum
Cleaning
|
03 May 2023 |
| T080135-v11 |
AdvLigo CDS Realtime Code Generator (RCG) Application Developer’s Guide |
Rolf Bork et al. |
Data Acquisition System
|
21 Apr 2023 |
| D060546-v1 |
Impact Absorber for Glass Stops, Earthquake Stop |
Derek Bridges |
Suspensions
Preliminary Design
|
15 May 2009 |
| E0900027-v1 |
LIGO Project Modifications to the GS-13 |
Brian Lantz |
Seismic Isolation
Final Design
|
16 Mar 2023 |
| E090003-v1 |
Timing System Document Map Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
03 Mar 2023 |
| D070100-v1 |
ADC AA Interface |
Jay Heefner |
Data and Computing
|
16 Jul 2010 |
| D1000228-v8 |
LIGO - D1000228-v8 Quadrapus CUSTOM CABLE V25N-8-5-8-5-v8 |
Rich Abbott et al. |
Fabrication
Sensing and Control
|
06 Feb 2023 |
| D1000220-v7 |
CUSTOM CABLE V25A-40 |
Emery Brown et al. |
Seismic Isolation
Fabrication
Sensing and Control
|
01 May 2012 |
| E2200004-v2 |
Filter Cavity End Controls Chassis Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
08 Dec 2022 |
| D2200006-v2 |
EtherCAT Filter Cavity End |
Daniel Sigg |
State Control and Monitoring
|
08 Dec 2022 |
| T970130-v4 |
Specification of a Common Data Frame Format for Interferometric Gravitational Wave Detectors (IGWD) |
Kent Blackburn et al. |
Data analysis software
Data and Computing
|
22 Nov 2022 |
| D070081-v6 |
AdL AA and AI Filter Board (65 kHz) |
Jay Heefner |
Data Acquisition System
|
11 Nov 2022 |
| D1000181-v3 |
IQ FET Demodulator Assembly |
Daniel Sigg |
Sensing and Control
|
07 Nov 2022 |
| E1100114-v2 |
Advanced LIGO IQ RF Demodulator Test Procedure |
Rich Abbott et al. |
Sensing and Control
|
03 Jun 2014 |
| D1201349-v2 |
Auxiliary Signals Concentrator 4 |
Daniel Sigg |
State Control and Monitoring
|
21 Oct 2022 |
| E0900394-v6 |
aLIGO optic container shipping and storage procedure |
GariLynn Billingsley et al. |
Core Optics
|
20 Sep 2022 |
| D0901301-v13 |
BSC ISI HEPI SEI System Wiring Schematic Diagram |
Benjamin Abbott |
Seismic Isolation
|
08 Sep 2022 |
| D1800185-v3 |
TwinCAT Mapping H1EcatC1 |
Daniel Sigg |
State Control and Monitoring
|
31 Aug 2022 |
| D070071-v1 |
Chassis Timing Interface |
Daniel Sigg |
Data Acquisition System
|
05 Aug 2022 |
| E080512-v6 |
E080512_ETM_Polishing_Specification |
Mick Flanigan |
Core Optics
Final Design
|
01 Aug 2022 |
| D1201350-v2 |
Auxiliary Signals Concentrator 4 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
19 Jul 2022 |
| E0900480-v6 |
FTIR Testing to Qualify Parts for LIGO UHV Service |
Dennis Coyne |
Fabrication
Vacuum
|
10 Jun 2022 |
| D1700316-v1 |
Squeezer 25-pin D-sub In-vacuum Cable |
Rich Abbott |
Squeezer
|
23 Sep 2020 |
| D0900004-v1 |
Cable Clamp, HAM 1/4-20 UHV Compatible |
Charles Osthelder |
Data Acquisition System
|
26 Apr 2022 |
| D0902146-v5 |
ASSEMBLY, ETM, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
12 Apr 2022 |
| T2100160-v1 |
Optimal State-Space Estimation of Interferometer Mode-Matching |
Mark Nguyen et al. |
Core Optics
State Control and Monitoring
|
23 Mar 2022 |
| E1900185-v4 |
TwinCAT EPICS IOC User Guide |
Daniel Sigg |
State Control and Monitoring
|
21 Feb 2022 |
| E2200056-v1 |
XML Schema for tcIoc Substitution File |
Daniel Sigg |
State Control and Monitoring
|
15 Feb 2022 |
| D1201530-v8 |
Optical Table Feedthrough Panel Layout: SQZT8 |
Daniel Sigg |
Squeezer
|
09 Feb 2022 |
| D071100-v3 |
Spring |
Andy Stein et al. |
Seismic Isolation
Final Design
|
03 Feb 2022 |
| E1200680-v6 |
TwinCAT Library for DC Power |
Alexa N Staley et al. |
State Control and Monitoring
|
26 Jan 2022 |
| D1500088-v2 |
Corner Station Controls Chassis 6 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
14 Jan 2022 |
| E1200358-x0 |
aLIGO, Slow Controls, Concentrators, Modular Signals Breakout |
Daniel Sigg |
State Control and Monitoring
|
13 Jan 2022 |
| D2200019-v1 |
D-Sub 25 Breakout |
Daniel Sigg |
State Control and Monitoring
|
13 Jan 2022 |
| D2200008-v1 |
Filter Cavity End Controls Chassis Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| D2200007-v1 |
Filter Cavity End Controls Chassis Front Panel |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| E2200008-v1 |
Test Procedure for Auxiliary Signals Concentrator 10 |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| E2200007-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 10 |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| D2200010-v1 |
Auxiliary Signals Concentrator 10 |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| D2200011-v1 |
Auxiliary Signals Concentrator 10 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| D2200012-v1 |
Auxiliary Signals Concentrator 10 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| E2200003-x0 |
aLIGO, Slow Controls, Chassis, Filter Cavity End |
Daniel Sigg |
State Control and Monitoring
|
05 Jan 2022 |
| E1200379-x0 |
aLIGO, Slow Controls, Chassis, Adapter Modules |
Daniel Sigg |
State Control and Monitoring
|
05 Jan 2022 |
| E1100018-v7 |
RF Amplifier Count |
Daniel Sigg |
Sensing and Control
|
20 Dec 2021 |
| D071120-v2 |
Actuator Magnet Mount |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071463-v2 |
Asm, Position Sensor Target |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071497-v2 |
Asm, Fixture, Actuator Set-Up |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071424-v2 |
Asm, Keel |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071470-v2 |
Asm, GS-13 with Fixtures |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071464-v2 |
Asm, Position Sensor |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071431-v2 |
Asm, Flexure |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071430-v2 |
Asm, Spring and Flexure |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071427-v2 |
Asm, Outer Wall, Small Panel |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071412-v2 |
Asm, Stage 0 Stiffener |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071442-v2 |
Asm, Actuator |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071450-v2 |
Asm, HAM-ISI Locker |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| E1800220-v1 |
XML Schema for Altium-TwinCAT workflow |
Daniel Sigg et al. |
State Control and Monitoring
|
16 Oct 2021 |
| D1102294-v4 |
EtherCAT IP Network Diagram |
Daniel Sigg |
State Control and Monitoring
|
15 Oct 2021 |
| E1101144-v4 |
EtherCAT IP Network Addresses |
Daniel Sigg |
State Control and Monitoring
|
15 Oct 2021 |
| D080177-v4 |
Compensation Plate ESD Pattern Drawing |
Kurt Buckland et al. |
Core Optics
Sensing and Control
Preliminary Design
|
08 Oct 2021 |
| D972610-v1 |
HAM Support Tube |
Stephany Foley |
Seismic Isolation
Final Design
|
10 Sep 2009 |
| D1101114-v8 |
PSL/IO/TCS Chassis |
Jose Puente |
State Control and Monitoring
Input Optics
Laser Systems
Installation
|
01 Sep 2021 |
| D1700185-v1 |
Squeezer Satellite Chassis Assembly (OBSOLETE) |
Rich Abbott et al. |
State Control and Monitoring
|
29 Jul 2021 |
| D1700439-v1 |
Squeezer OPO TEC and Thermistor Cable |
Rich Abbott |
Squeezer
|
13 Sep 2017 |
| D1700438-v1 |
Squeezer Oven Translation and Piezo Cable |
Rich Abbott |
Squeezer
|
13 Sep 2017 |
| D080658-v6 |
aLIGO, COC End Test Mass (ETM) Substrate (D080658_ALIGO COC_ETM_SUBSTRATE) |
Calum Torrie |
Core Optics
Final Design
|
14 Jul 2021 |
| D080657-v7 |
aLIGO, COC Input Test Mass (ITM) Substrate (D080657 ALIGO COC ITM SUBSTRATE) |
Calum Torrie |
Core Optics
Final Design
|
14 Jul 2021 |
| E080511-v6 |
ITM Polish Specification |
Mick Flanigan |
Core Optics
Final Design
|
14 Jul 2021 |
| T1100068-v23 |
Photon Calibrator Preliminary/Final Design Document |
Jonathan Berliner et al. |
Assembly
Requirements
Basic R&D
Auxiliary Optics
Conceptual Design
Preliminary Design
Laser Systems
Upgrades
Calibration
Detector Characterization
|
06 Jul 2021 |
| T0900023-v2 |
(OMC) DC (DCPD) readout (Power) Normalization (Linearization) |
Sam Waldman |
Commissioning
Sensing and Control
|
25 Jun 2021 |
| D2000017-v2 |
PSL/IO/TCS Chassis Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
17 Jun 2021 |
| D972611-v1 |
LIGO HAM Expansion Bellows |
Stephany Foley |
Seismic Isolation
Final Design
|
01 Sep 2009 |
| T0900140-v1 |
AdL Triple Acquisition Driver Board Prototype Test Plan |
Jay Heefner |
System Test
Suspensions
|
19 Aug 2009 |
| D1001372-v4 |
Timing Comparator Rear Panel |
Ilya Belopolski |
Data Acquisition System
|
06 May 2021 |
| T1100613-v3 |
SEI System Real-Time Band-Limited RMS Filter (ISI Performance Matrix, Matrices) |
Christopher Kucharczyk et al. |
Data and Computing
Data Analysis
|
04 May 2021 |
| E1100274-v5 |
Common Mode Servo Count |
Daniel Sigg |
Sensing and Control
|
28 Apr 2021 |
| T2000294-v4 |
LSC-Virgo Operations White Paper (Summer 2020 edition) |
Nicolas Arnaud et al. |
Operations
Data quality / vetoes
External Collaboration
Commissioning
Astrophysics / Multi-messenger
Data and Computing
Calibration
Computing/archiving
Detector Characterization
|
21 Apr 2021 |
| D0902791-v1 |
Viewport Guard Dust Cover |
Michael Meyer |
Preliminary Design
Vacuum
|
19 Jan 2010 |
| E1100512-v3 |
EtherCAT Module Labels |
Daniel Sigg |
State Control and Monitoring
|
25 Feb 2021 |
| E010613-v2 |
Generic Requirements & Standards for Detector Subsystems |
Dennis Coyne |
Fabrication
System Engineering
Final Design
|
24 Feb 2021 |
| D1002209-v2 |
DC Power Extension Cord |
David Kinzel |
System Engineering
|
24 Feb 2021 |
| D2000505-v1 |
Auxiliary Signals Concentrator 9 |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D1201483-v1 |
Feedthrough panel for EtherCAT TEC Driver |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| E2100070-v1 |
Test Procedure for Auxiliary Signals Concentrator 9 |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D2000506-v1 |
Auxiliary Signals Concentrator 9 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D2000507-v1 |
Auxiliary Signals Concentrator 9 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D2100070-v1 |
EtherCAT panel D-sub 37 for Auxiliary Concentrator 1 |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D1900143-v2 |
EtherCAT panel D-sub 37 for AM Modulated AOM Amplifier |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D2100057-v1 |
EtherCAT panel D-sub 37 for DC PD Concentrator 9 |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| E1600385-x0 |
aLIGO, Slow Controls, Chassis, Squeezer 3 |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D2100054-v1 |
Squeezer Controls Chassis 4 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
11 Feb 2021 |
| D2100055-v1 |
Squeezer Controls Chassis 4 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
11 Feb 2021 |
| E1700310-v1 |
4G TTFSS Count |
Daniel Sigg |
Squeezer
|
01 Sep 2017 |
| D080276-v2 |
aLIGO (US, ISC) 4 Channel Satellite Amplifier Circuit Board (Amp, SatAmp) |
Jay Heefner |
Suspensions
Final Design
|
04 Feb 2021 |
| E2000526-x0 |
aLIGO, Slow Controls, Chassis, Squeezer 4 |
Daniel Sigg |
State Control and Monitoring
|
01 Feb 2021 |
| D0901075-v3 |
AdLIGO SEI Bulk Trim Masses |
Stephany Foley et al. |
Seismic Isolation
Final Design
|
20 Nov 2009 |
| T990013-x0 |
Diagnostics Test Software |
Daniel Sigg et al. |
Data Acquisition System
Sensing and Control
Document Migration
Data and Computing
|
30 Nov 2010 |
| E1500362-v11 |
aLIGO, SQZ, Electronics Block Diagram |
Lisa Barsotti et al. |
Final Design
Squeezer
|
06 Feb 2017 |
| T1900370-v7 |
Understanding interferometer lock losses with machine learning |
Laurel White et al. |
Commissioning
State Control and Monitoring
|
12 Oct 2020 |
| E1100455-v3 |
EtherCAT 4km Remote Access Controls Chassis Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
22 Sep 2020 |
| D1100619-v3 |
EtherCAT 4km Remote Access End |
Daniel Sigg |
Sensing and Control
|
22 Sep 2020 |
| E0900047-v23 |
LIGO Contamination Control Plan |
Betsy Weaver et al. |
Risk Management
Observatory Facilities
Cleaning
|
17 Sep 2020 |
| D970412-v1 |
BSC Overall Assembly, LIGO Vacuum Equipment |
Dennis Coyne |
Fabrication
Vacuum
|
16 Sep 2020 |
| E1200202-x0 |
aLIGO, Slow Controls, EtherCAT Systems |
Daniel Sigg |
State Control and Monitoring
|
09 Sep 2020 |
| E1200203-x0 |
aLIGO, Slow Controls, EtherCAT Setup and Installation |
Daniel Sigg |
State Control and Monitoring
|
09 Sep 2020 |
| D1001530-v7 |
aLIGO ISC Whitening Board |
Rich Abbott |
Conceptual Design
Sensing and Control
|
03 Aug 2020 |
| E2000252-v1 |
Electronic Data Sheet File for the Anybus X-Gateway AB9000 |
Daniel Sigg |
State Control and Monitoring
|
05 May 2020 |
| E2000251-x0 |
aLIGO, Slow Controls, EtherCAT Workflow |
Daniel Sigg |
State Control and Monitoring
|
05 May 2020 |
| E1200224-x0 |
aLIGO, Slow Controls |
Daniel Sigg |
State Control and Monitoring
|
05 May 2020 |
| E080177-v2 |
RGA Test Qualification of components for the LIGO UHV |
Dennis Coyne |
Fabrication
System Engineering
Vacuum
|
15 Apr 2020 |
| P2000107-v6 |
advligorts: The Advanced LIGO Real-Time Digital Control and Data Acquisition System |
Jameson Graef Rollins et al. |
Data Acquisition System
Sensing and Control
Data and Computing
|
31 Mar 2020 |
| T1900280-v1 |
Optimal non-linear control for LIGO interferometers |
Millind Vaddiraju et al. |
Project Controls
|
01 Mar 2020 |
| E0900479-v3 |
Instructions for taking Low Volatility Residue (LVR) Wipe Samples |
Dennis Coyne |
Fabrication
Vacuum
|
28 Feb 2020 |
| D080117-v1 |
Penultimate Mass, ETM Quad |
Russell Jones |
Fabrication
Suspensions
Final Design
|
14 Feb 2020 |
| D1101001-v3 |
aLIGO, high quality, 6" Viewport Flange |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
26 Sep 2011 |
| D0900931-v6 |
gold coating pattern compensation plates (CP) barrel |
Calum Torrie |
Core Optics
System Engineering
|
14 Dec 2009 |
| E1200377-x0 |
aLIGO, Slow Controls, Chassis, PSL/IO/TCS |
Daniel Sigg |
State Control and Monitoring
|
17 Jan 2020 |
| D0900608-v4 |
Voltage Controlled Oscillator: Mounting Plate |
Daniel Sigg |
Sensing and Control
|
21 Dec 2011 |
| E1100267-v1 |
6 inch Vacuum Viewport Window |
Peter Fritschel |
Auxiliary Optics
Vacuum
|
25 Mar 2011 |
| P1900188-v2 |
Optical Cavity Inference Techniques for Low Noise Interferometry |
Jorge Ramirez et al. |
Data and Computing
|
25 Nov 2019 |
| E1200226-v8 |
TwinCAT Library for Low Noise VCO |
Daniel Sigg |
State Control and Monitoring
|
01 Nov 2019 |
| E1700223-v1 |
TwinCAT Library for VCXO |
Daniel Sigg |
State Control and Monitoring
|
01 Nov 2019 |
| E1900164-v2 |
TwinCAT Library for AOM Driver |
Daniel Sigg |
State Control and Monitoring
|
07 Oct 2019 |
| D0900906-v1 |
Earthquake Stop Adjuster and Mount, 2 Inch |
Derek Bridges |
Suspensions
Preliminary Design
|
03 Oct 2019 |
| D040180-v7 |
Common Mode Servo Board |
Daniel Sigg |
Sensing and Control
|
06 Sep 2019 |
| D1101006-v1 |
aLIGO, high quality, non-wedged, 6" Viewport, Optic |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
09 Jun 2011 |
| E1200381-x0 |
aLIGO, Slow Controls, EtherCAT Software |
Daniel Sigg |
State Control and Monitoring
|
05 Jun 2019 |
| E0900246-v4 |
Coated Substrate, ALIGO Signal Recycling Mirror T=20% |
Rodica Martin |
Core Optics
Fabrication
Input Optics
|
17 May 2019 |
| E0900089-v4 |
Substrate, ALIGO Signal Recycling Mirror (SRM) for L1 and H1 interferometers - unfolded |
Rodica Martin |
Core Optics
Input Optics
Final Design
|
17 May 2019 |
| E0900087-v4 |
Substrate, ALIGO Power Recycling Mirror (PRM) for L1 and H1 interferometers - unfolded |
Rodica Martin |
Core Optics
Input Optics
Final Design
|
17 May 2019 |
| E0900093-v4 |
Substrate, ALIGO Signal Recycling Mirror 2 (SR2) for L1 and H1 interferometers - unfolded |
Rodica Martin |
Core Optics
Input Optics
Final Design
|
17 May 2019 |
| E0900091-v4 |
Substrate, ALIGO Power Recycling Mirror 2 (PR2) for L1 and H1 interferometers - unfolded |
Rodica Martin |
Core Optics
Input Optics
Final Design
|
17 May 2019 |
| E1200632-v6 |
TwinCAT Library for ALS Laser |
Alexa N Staley |
State Control and Monitoring
|
08 May 2019 |
| D1700176-v1 |
Auxiliary Signals Concentrator 7 |
Daniel Sigg |
State Control and Monitoring
|
26 Apr 2019 |
| E1300124-v2 |
TwinCAT Library for Beam Diverter |
Sheila Dwyer et al. |
State Control and Monitoring
|
23 Apr 2019 |
| T000127-v4 |
Core Optics Components (COC) Design Requirements Document (DRD) |
Gregg Harry et al. |
Core Optics
Final Design
|
16 Apr 2019 |
| E1200627-v3 |
TwinCAT Library for Delay Line |
Alexa N Staley |
State Control and Monitoring
|
11 Apr 2019 |
| D047813-v3 |
D047813-- Baseplate, GS-13 Horizontal & Vertical |
Andy Stein |
Seismic Isolation
Final Design
|
11 Apr 2019 |
| D047812-v3 |
D047812- GS-13 Pod Top Mount |
Stephany Foley |
Seismic Isolation
|
11 Apr 2019 |
| T0810012-v3 |
High Reliability Electronics for LIGO |
Rich Abbott |
Requirements
Risk Management
System Engineering
|
14 Mar 2019 |
| T040027-v2 |
Conceptual Design of Beamsplitter Suspension for aLIGO |
Norna Robertson et al. |
Conceptual Design
Suspensions
|
14 Mar 2019 |
| D080373-v3 |
Clamp Asm, HAM Support Tube |
Andy Stein |
Seismic Isolation
Final Design
|
11 Jan 2011 |
| D0901781-v2 |
Common Mode Servo Assembly |
Daniel Sigg |
Sensing and Control
|
22 Feb 2019 |
| D0901154-v4 |
aLIGO Systems, WBSC10-H1 Top Level Chamber Assembly |
Jose Eduardo Chavez |
System Engineering
Final Design
|
11 Apr 2013 |
| E1300767-v2 |
TwinCAT Library for ALS Frequency |
Daniel Sigg et al. |
State Control and Monitoring
|
10 Jan 2019 |
| T1000543-v2 |
Effect of the end mirror curvature error to the contrast of a Fabry-Perot based Michelson interferometer |
Koji Arai |
Core Optics
Modelling
|
09 Jan 2019 |
| E1000079-v9 |
First Contact Brush and Pour Application Procedure |
Margot Hennig et al. |
Core Optics
System Engineering
|
19 Dec 2018 |
| T1500188-v5 |
Active Wavefront Control Roadmap |
Aidan Brooks et al. |
Core Optics
Requirements
Basic R&D
Auxiliary Optics
Conceptual Design
State Control and Monitoring
Sensing and Control
Preliminary Design
|
30 Nov 2018 |
| E1100273-v3 |
Phase-Frequency Discriminator and Dual Demodulator Count |
Daniel Sigg |
Sensing and Control
|
13 Nov 2018 |
| T0900144-v7 |
Adv. LIGO Arm Length Stabilization Design |
Sam Waldman et al. |
Sensing and Control
Final Design
|
08 Nov 2018 |
| T0900083-v1 |
Modeling Cable Noise in LIGO |
Julian Earl Freed-Brown et al. |
Modelling
Suspensions
Final Design
|
16 Oct 2018 |
| D1700423-v2 |
Picomotor Y-Cable Squeezer |
Daniel Sigg |
Squeezer
|
15 Oct 2018 |
| E1800295-v1 |
TwinCAT Library for Squeezer OPO Resonance |
Daniel Sigg |
State Control and Monitoring
|
15 Oct 2018 |
| D070270-v2 |
Locker Sleeve |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| E1700370-v2 |
ECR: Modernizing the EtherCAT Slow Controls System |
Daniel Sigg |
State Control and Monitoring
|
31 Aug 2018 |
| E1100102-v2 |
Test Procedure for Phase-Frequency Discriminator |
Daniel Sigg et al. |
Sensing and Control
|
28 Mar 2011 |
| T070082-v1 |
LIGO I mirror scattering loss by microroughness |
Hiro Yamamoto |
Core Optics
Commissioning
|
06 Apr 2009 |
| E1200369-x0 |
aLIGO, Slow Controls, Chassis, End Remote Access |
Daniel Sigg |
State Control and Monitoring
|
25 Jun 2018 |
| D1100618-v2 |
EtherCAT MSR Corner |
Daniel Sigg |
Sensing and Control
|
25 Jun 2018 |
| E1200367-x0 |
aLIGO, Slow Controls, Chassis, MSR Corner |
Daniel Sigg |
State Control and Monitoring
|
25 Jun 2018 |
| E1201049-v18 |
EtherCAT Corner Channel Link List |
Patrick Thomas et al. |
State Control and Monitoring
|
10 May 2018 |
| D1700393-v1 |
Squeezer 3.125MHz OMC/Homodyne Breakout Drawing |
Luis Sanchez |
Data Acquisition System
Sensing and Control
Squeezer
|
16 Apr 2018 |
| E1700244-v2 |
TwinCAT Library for Motorized Flipper/TTL IO Controller |
Daniel Sigg |
State Control and Monitoring
|
06 Apr 2018 |
| D0900760-v2 |
EOM/AOM Driver |
Daniel Sigg |
Sensing and Control
|
03 Apr 2018 |
| E1700243-v3 |
TwinCAT Library for PZT Driver |
Daniel Sigg |
State Control and Monitoring
|
30 Mar 2018 |
| D060454-v3 |
ADVANCED LIGO, SUS, QUAD LOWER STRUCTURE |
Joe ODell |
Suspensions
|
30 Mar 2018 |
| E1800064-v2 |
ECR: Increase Transimpedance Gain for CLF Photodetector |
Daniel Sigg |
Squeezer
|
29 Mar 2018 |
| T1000534-v4 |
COC Ergo-Arm Procedure for lifting large optics |
Margot Hennig |
Core Optics
|
22 Mar 2018 |
| D1700394-v1 |
Squeezer 3.125MHz Band Pass Filter Front Panel Files |
Luis Sanchez |
Data Acquisition System
Sensing and Control
Squeezer
|
30 Sep 2017 |
| T980024-v1 |
Data Acquisition Daemon (DAQD) Client Server Communication Protocol, Version 11, date 1-09-2002 |
Alexander Ivanov |
Data Acquisition System
Document Migration
|
21 Jan 2011 |
| E1800045-v1 |
Modification of the Optical Fiber Switch Interface |
Marc Pirello |
Squeezer
|
22 Feb 2018 |
| E1800040-v1 |
ECR: Increase Transimpedance for OPO TRANS DCPD |
Daniel Sigg |
Squeezer
|
21 Feb 2018 |
| T1700195-v3 |
Mirror Metrology using Mode Spectroscopy |
Kaustubh Singhi et al. |
Core Optics
Basic R&D
Data analysis software
Data and Computing
|
19 Feb 2018 |
| T1700196-v3 |
Laser Mode Spectroscopy for Mirror Metrology |
Naomi Wharton et al. |
Core Optics
Basic R&D
Data analysis software
Data and Computing
|
19 Feb 2018 |
| T1700198-v1 |
Online Detector Characterization using Neural Networks |
Roxana Popescu et al. |
Seismic Isolation
Basic R&D
State Control and Monitoring
Sensing and Control
Data and Computing
|
19 Feb 2018 |
| D1100326-v2 |
Picomotor Driver Board |
Daniel Sigg |
Sensing and Control
|
13 Feb 2018 |
| T1000504-v2 |
Test Procedure for RF Frequency Doubler |
Daniel Sigg |
Sensing and Control
|
24 May 2011 |
| E1800030-v1 |
ECR: TTFSS Preamp Modification |
Daniel Sigg |
Squeezer
|
09 Feb 2018 |
| D1700325-v2 |
TTFSS Pre-Amplifier Front Panel |
Daniel Sigg |
Squeezer
|
09 Feb 2018 |
| D1700324-v2 |
TTFSS Pre-Amplifier Assembly |
Daniel Sigg |
Squeezer
|
09 Feb 2018 |
| E1300146-v2 |
TwinCAT Library for TEC Controller |
Sheila Dwyer |
State Control and Monitoring
|
07 Feb 2018 |
| D060353-v2 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, Pen Re Pitch Mass |
Joe ODell |
Suspensions
|
31 Jan 2018 |
| E1800016-v1 |
ECR: TTFSS v4 Fixes |
Daniel Sigg |
Squeezer
|
31 Jan 2018 |
| E1600257-v1 |
TwinCAT Library for AS Port Fast Shutter Protection |
Daniel Sigg |
State Control and Monitoring
|
31 Jan 2018 |
| E1200359-x0 |
aLIGO, Slow Controls, Controllers, Uniblitz Shutter and AS Port Fast Shutter |
Daniel Sigg |
State Control and Monitoring
|
31 Jan 2018 |
| S1700173-v8 |
PZT Driver Chassis |
Benjamin Abbott |
Squeezer
|
26 Jan 2018 |
| T1700233-x0 |
PZT Driver Test Procedure |
Benjamin Abbott |
Squeezer
|
24 Jan 2018 |
| E070078-v2 |
SUBSTRATE, ALIGO MODE CLEANER FLAT MIRROR |
Rodica Martin et al. |
Input Optics
Final Design
|
23 Jan 2018 |
| D1700328-v1 |
Optical Fiber Switch Interface Rear Panel |
Daniel Sigg |
Squeezer
|
19 Jan 2018 |
| D1700327-v1 |
Optical Fiber Switch Interface Front Panel |
Daniel Sigg |
Squeezer
|
19 Jan 2018 |
| E1700426-v1 |
ECR: Correct channel assignment for CLF_REFL_RF6 |
Daniel Sigg |
Squeezer
|
22 Dec 2017 |
| T1700214-v4 |
The LSC-Virgo White Paper on Gravitational Wave Data Analysis and Astrophysics (2017-2018 edition) |
Peter Shawhan et al. |
GW Bursts
Data quality / vetoes
Other data analysis
Continuous Wave
Astrophysics / Multi-messenger
Stochastic
Data analysis software
Compact Binaries
Data and Computing
Calibration
Computing/archiving
Detector Characterization
Data Analysis
|
20 Dec 2017 |
| E970129-v2 |
Material, Process, Handling, and Shipping Specification for Welding Diaphragm Bellows |
Stephany Foley |
Seismic Isolation
Fabrication
|
27 Nov 2017 |
| E1700390-v1 |
(OPOS) Optical Parametric Oscillator Suspension Controls Arrangement Poster |
Jeffrey Kissel |
Assembly
Integration
Suspensions
Sensing and Control
Final Design
Subsystem Test
Squeezer
|
13 Nov 2017 |
| E1700129-x0 |
aLIGO, Slow Controls, Controllers, Motorized Flipper/TTL IO |
Daniel Sigg et al. |
State Control and Monitoring
|
03 Nov 2017 |
| P1700253-v1 |
Quantum back-action-evading gravitational wave detection in the negative mass reference frame |
Farit Khalili et al. |
Core Optics
Basic R&D
Squeezer
|
06 Sep 2017 |
| D1700309-v2 |
Squeezer 3.125 MHz Signal Pickoff Chassis Block Diagram |
Rich Abbott et al. |
Squeezer
|
12 Oct 2017 |
| D1700403-v1 |
Homodyne Photodetector Whitening Board |
Luis Sanchez |
Sensing and Control
Squeezer
|
12 Oct 2017 |
| D1700405-v1 |
Squeezer Interface Board |
Benjamin Abbott |
Squeezer
|
04 Oct 2017 |
| D1700376-v1 |
Squeezer 3.125MHz Signal Pickoff Schematic |
Luis Sanchez |
Auxiliary Optics
Data Acquisition System
Sensing and Control
Squeezer
|
30 Sep 2017 |
| D1700395-v1 |
Squeezer 3.125MHz Band Pass Filter Rear Panel Files |
Luis Sanchez |
Data Acquisition System
State Control and Monitoring
Squeezer
|
30 Sep 2017 |
| E1700199-v1 |
Timeline for the aLIGO squeezing upgrade at LHO |
Lisa Barsotti |
Squeezer
|
26 Sep 2017 |
| E1700250-v1 |
RF TTFSS Pre-Amplifier Specifications |
Daniel Sigg |
Squeezer
|
22 Sep 2017 |
| E1200361-x0 |
aLIGO, Slow Controls, Controllers, Picomotor |
Daniel Sigg |
State Control and Monitoring
|
08 Sep 2017 |
| D1700146-v1 |
PZT Patch Panel |
Daniel Sigg |
Squeezer
|
07 Sep 2017 |
| D1000185-v3 |
IQ FET Demodulator Power Interface |
Daniel Sigg |
Sensing and Control
|
15 Apr 2017 |
| E1100020-v2 |
RF Harmonics Generator Count |
Daniel Sigg |
Sensing and Control
|
13 Apr 2012 |
| E1700131-v1 |
Motorized Flipper/TTL IO Count |
Daniel Sigg |
State Control and Monitoring
|
01 Sep 2017 |
| D1700171-v1 |
Motorized Flipper/TTL IO Assembly |
Daniel Sigg et al. |
State Control and Monitoring
|
28 Aug 2017 |
| G1701594-v1 |
Brief LIGO Controls Overview |
Dennis Coyne |
Detector
State Control and Monitoring
Sensing and Control
|
26 Aug 2017 |
| D1700172-v2 |
Motorized Flipper/TTL IO Front Panel |
Daniel Sigg et al. |
State Control and Monitoring
|
25 Aug 2017 |
| D1700173-v2 |
Motorized Flipper/TTL IO Rear Panel |
Daniel Sigg et al. |
State Control and Monitoring
|
24 Aug 2017 |
| E1201034-x0 |
aLIGO, Slow Controls, Controllers, TEC Driver |
Daniel Sigg |
State Control and Monitoring
|
14 Aug 2017 |
| G1701409-v1 |
Machine learning for lock loss analysis |
Jameson Graef Rollins |
State Control and Monitoring
Sensing and Control
Detector Characterization
|
20 Jul 2017 |
| D1700329-v1 |
Optical Fiber Switch Interface Side Panel |
Daniel Sigg |
Squeezer
|
18 Jul 2017 |
| E1200206-x0 |
aLIGO, Slow Controls, Controllers |
Daniel Sigg |
State Control and Monitoring
|
17 Jul 2017 |
| T1700346-v2 |
Low Noise Amplifier for RF TTFSS Preamplifier |
Daniel Sigg |
Squeezer
|
17 Jul 2017 |
| T1700348-v2 |
Directional Coupler for RF TTFSS Preamplifier |
Daniel Sigg |
Squeezer
|
17 Jul 2017 |
| T1700349-v2 |
Directional Coupler 2 for RF TTFSS Preamplifier |
Daniel Sigg |
Squeezer
|
17 Jul 2017 |
| T1700347-v2 |
Power Splitter for RF TTFSS Preamplifier |
Daniel Sigg |
Squeezer
|
17 Jul 2017 |
| E1700248-x0 |
aLIGO, ISC, RF System, RF TTFSS Pre-Amplifier |
Daniel Sigg |
Squeezer
|
17 Jul 2017 |
| G1701230-x0 |
Development of a squeezed light source at 2 micron |
Georgia Mansell et al. |
Basic R&D
Squeezer
|
09 Jul 2017 |
| E1700021-x0 |
aLIGO, SQZ, Electronics, In-vacuum wiring |
John Miller |
Squeezer
|
30 Jun 2017 |
| E1000482-v6 |
RF Source OCXO Count |
Daniel Sigg |
Sensing and Control
|
19 Jun 2017 |
| D1700145-v1 |
AOM Patch Panel |
Daniel Sigg |
Squeezer
|
14 Jun 2017 |
| D1700147-v2 |
Fiber Coupler Patch Panel for Squeezer LO |
Daniel Sigg |
Squeezer
|
14 Jun 2017 |
| G1700809-v1 |
What Does Low Frequency Control Look Like in the 2G+ and 3G Era? |
Jeffrey Kissel |
Seismic Isolation
Integration
Basic R&D
Conceptual Design
State Control and Monitoring
Suspensions
System Engineering
Sensing and Control
Upgrades
Squeezer
|
12 Jun 2017 |
| D1700022-v2 |
Squeezer Controls Chassis 2 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
06 Jun 2017 |
| P1600245-v1 |
[Thesis] Squeezed states for advanced gravitational wave detectors |
Eric Oelker et al. |
Thesis/Dissertation
Squeezer
|
02 Jun 2017 |
| G1700902-v1 |
Machine learning for lock loss analysis |
Jameson Graef Rollins |
State Control and Monitoring
Sensing and Control
Detector Characterization
|
10 May 2017 |
| D1100814-v2 |
H2 Electronics Building HVAC Plan |
John Worden et al. |
Observatory Facilities
|
03 May 2017 |
| D1700036-v2 |
Squeezer Controls Chassis 3 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
18 Apr 2017 |
| D1600512-v1 |
SQZ R2 |
Daniel Sigg |
Squeezer
|
17 Apr 2017 |
| E1500361-x0 |
aLIGO, SQZ, VOPO |
Lisa Barsotti et al. |
Preliminary Design
Squeezer
|
17 Apr 2017 |
| T1700013-v1 |
aLIGO, SQZ, Electronics, Analog, HV supply requirements |
John Miller et al. |
Squeezer
|
15 Apr 2017 |
| T1700019-v2 |
aLIGO, SQZ, Electronics, In-vacuum wiring plan, VOPO Controls |
John Miller |
Squeezer
|
15 Apr 2017 |
| D1002478-v1 |
Phase Frequency Discriminator Rear Panel |
Daniel Sigg |
Sensing and Control
|
10 Feb 2017 |
| D1000183-v2 |
IQ FET Demodulator Rear Panel |
Daniel Sigg |
Sensing and Control
|
15 Apr 2017 |
| D1700181-v1 |
Auxiliary Signals Concentrator 8 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| D1700180-v1 |
Auxiliary Signals Concentrator 8 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| D1700179-v1 |
Auxiliary Signals Concentrator 8 |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| D1700178-v1 |
Auxiliary Signals Concentrator 7 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| D1700177-v1 |
Auxiliary Signals Concentrator 7 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| T1600606-v4 |
ADC and DAC Channel Usage for SQZ |
Daniel Sigg et al. |
Squeezer
|
13 Apr 2017 |
| E1700137-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 8 |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| E1700136-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 7 |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| E1700130-x0 |
Motorized Flipper/TTL IO Specification |
Daniel Sigg |
State Control and Monitoring
|
12 Apr 2017 |
| T1700131-v1 |
Time domain implementation of DCPD cross correlation |
Kiwamu Izumi |
Commissioning
Data and Computing
Calibration
Detector Characterization
|
28 Mar 2017 |
| G1700563-v1 |
CSWG Workshop at the March 2017 LVC meeting |
Dennis Coyne |
State Control and Monitoring
System Engineering
Sensing and Control
|
17 Mar 2017 |
| E1200784-v3 |
TwinCAT Library for the Advanced LIGO timing system |
Maggie Tse et al. |
State Control and Monitoring
|
09 Mar 2017 |
| G1700240-v1 |
Post-O2 software plans |
Jameson Graef Rollins |
Data Acquisition System
State Control and Monitoring
|
22 Feb 2017 |
| D0901783-v1 |
Common Mode Servo Rear Panel |
Daniel Sigg |
Sensing and Control
|
10 Feb 2017 |
| D1600510-v1 |
Corner Station Squeezer 3 Name Plate |
Daniel Sigg |
State Control and Monitoring
|
31 Jan 2017 |
| D1100975-v1 |
RF Frequency Divide-by-Eight Mounting Plate |
Daniel Sigg |
Sensing and Control
|
27 Jan 2017 |
| E1100632-v2 |
Addresses of EtherCAT Chassis |
Daniel Sigg |
State Control and Monitoring
|
22 Jan 2017 |
| D1600505-v1 |
EtherCAT panel D-sub 25 for RF Frequency Difference Mixer |
Daniel Sigg |
State Control and Monitoring
|
21 Jan 2017 |
| D0902745-v5 |
aLIGO LSC IQ Demodulator Board |
Rich Abbott et al. |
Sensing and Control
|
05 Jan 2017 |
| T1600285-v3 |
Temperature control of silicon mirrors in locked cavities at 123 K |
Nizar Ezroura et al. |
State Control and Monitoring
Laser Systems
|
02 Jan 2017 |
| E1600391-x0 |
aLIGO, SQZ, Electronics, Physical Layout |
Daniel Sigg |
Squeezer
|
28 Dec 2016 |
| E1500467-v1 |
aLIGO, SQZ, Viewports |
John Miller et al. |
Vacuum
Squeezer
|
28 Dec 2016 |
| D1600506-v1 |
Corner Station Squeezer 2 Name Plate |
Daniel Sigg |
State Control and Monitoring
|
27 Dec 2016 |
| D1600508-v1 |
EtherCAT Panel PZT Driver |
Daniel Sigg |
State Control and Monitoring
|
27 Dec 2016 |
| D0902563-v1 |
EtherCAT Panel Double D-sub 15 |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| G1602295-v1 |
LIGO: the Dawn of Gravitational Wave Astronomy |
Jameson Graef Rollins |
Data Acquisition System
State Control and Monitoring
Public Talk / Colloquium
Astrophysics / Multi-messenger
Data and Computing
Education, Outreach
|
16 Nov 2016 |
| E1300780-v3 |
TwinCAT Library for PLC Info |
Alexa N Staley et al. |
State Control and Monitoring
|
19 Oct 2016 |
| E1200416-v3 |
TwinCAT Library for Demodulators |
Daniel Sigg |
State Control and Monitoring
|
11 Oct 2016 |
| T1500187-v2 |
Low Loss Faraday Isolator Preliminary Design |
Ryan Goetz |
Preliminary Design
Squeezer
|
07 Sep 2016 |
| G1600068-v3 |
A low loss Faraday isolator for squeezed vacuum injection in Advanced LIGO |
Ryan Goetz |
Squeezer
|
06 Sep 2016 |
| G1400001-v3 |
The Status of Advanced LIGO: Light at the End of the Tunnels! |
Jeffrey Kissel et al. |
Seismic Isolation
Core Optics
Integration
Auxiliary Optics
Data Acquisition System
Commissioning
State Control and Monitoring
Public Talk / Colloquium
Suspensions
Input Optics
System Engineering
Sensing and Control
Laser Systems
|
17 Aug 2016 |
| E1300772-v2 |
TwinCAT Library for ALS State Machine |
Alexa N Staley et al. |
State Control and Monitoring
|
17 Aug 2016 |
| P1600066-v7 |
Distributed State Machine Supervision for Long-baseline Gravitational-wave Detectors with the Guardian Automation Platform |
Jameson Graef Rollins |
State Control and Monitoring
|
11 Aug 2016 |
| E1600256-v1 |
TwinCAT Library for PZT Shutter |
Daniel Sigg |
State Control and Monitoring
|
10 Aug 2016 |
| D1101115-v2 |
aLIGO, high quality, 6in Viewport Clamp, wedged |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
08 Jul 2011 |
| D961142-v1 |
60" HAM Cover, Type A-4, HAM Chamber |
Dennis Coyne |
Vacuum
Document Migration
|
27 Jul 2016 |
| D970427-v1 |
84" HAM Cover, Horizontal Access Module (HAM), LIGO Vacuum Equipment |
Dennis Coyne |
Vacuum
Document Migration
|
27 Jul 2016 |
| D1001518-v7 |
Cable, Upper Ring Heater Segment |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
17 Jun 2016 |
| D080365-v6 |
Viewport Guard |
Michael Meyer |
Observatory Facilities
Vacuum
Final Design
|
19 May 2016 |
| D090007-v4 |
Advanced LIGO, Suspension, ETM/ITM Quad PM, Production Ear with Recess |
Marielle van Veggel |
Suspensions
Final Design
|
14 Apr 2016 |
| D060341-v11 |
ADVANCED LIGO, SUS, QUAD, PENULTIMATE REACTION MASS, ETM AND ITM CONFIGURATION |
Joe ODell et al. |
Suspensions
|
13 Apr 2016 |
| D080166-v9 |
aLIGO, SUS, PENRE QUAD, OSEM CAN ETM / ITM |
Joe ODell et al. |
Suspensions
|
06 Apr 2016 |
| D060375-v7 |
Advanced LIGO, SUS, Quad N-Ptype, UI MASS Main and Reaction Assembly Drawing and Process |
Joe ODell et al. |
Suspensions
|
29 Mar 2016 |
| T1000091-v2 |
Semiconductor Cleaning for In-vacuum Applications |
Rich Abbott et al. |
Assembly
Sensing and Control
|
22 Mar 2016 |
| G1600470-v1 |
Constructing Natural Glitch Dictionaries |
Maria Principe et al. |
Basic R&D
Data and Computing
Data Analysis
|
12 Mar 2016 |
| E1600080-v1 |
AOS/ISC SQZ: Output Faraday Isolator Test Report (LLO) |
Koji Arai et al. |
Auxiliary Optics
Sensing and Control
Subsystem Test
Squeezer
|
08 Mar 2016 |
| E1400209-x0 |
aLIGO, Automation, Guardian |
Daniel Sigg |
State Control and Monitoring
|
06 Mar 2016 |
| E1500157-v1 |
TwinCAT Library for EOM Driver |
Daniel Sigg |
State Control and Monitoring
|
24 Feb 2016 |
| G1400016-v7 |
Advanced LIGO Guardian: Overview and Coder’s Introduction |
Jameson Graef Rollins |
State Control and Monitoring
|
26 Jan 2016 |
| D060388-v4 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, BRACKET UI MASS OSEM MOUNT |
Joe ODell |
Suspensions
|
11 Jan 2016 |
| G1600019-v1 |
Plan for the replacement OFI assembling at LLO |
Koji Arai |
Assembly
Auxiliary Optics
Squeezer
|
04 Jan 2016 |
| G1501436-v1 |
Optical Second Harmonic Generation |
Curtis Rau |
Squeezer
|
30 Nov 2015 |
| P1500246-v1 |
Wavelength Tunable Optical Second Harmonic Generation Suitable For Use With The LIGO Squeezer |
Curtis Rau |
Squeezer
|
26 Nov 2015 |
| M050303-v5 |
Advanced LIGO Project Execution Plan |
David Shoemaker et al. |
Management
Project Controls
|
25 Nov 2015 |
| E080035-v1 |
Specification: Mirror Blank Material, Adv. LIGO Beamsplitter (BS) Mirror |
GariLynn Billingsley et al. |
Core Optics
Fabrication
Final Design
|
06 Nov 2015 |
| G1501274-v4 |
Status of the Advanced LIGO Project |
Jameson Graef Rollins |
Data Acquisition System
State Control and Monitoring
Public Talk / Colloquium
Data and Computing
Computing/archiving
|
19 Oct 2015 |
| T0900050-v1 |
Test Document for the Advanced LIGO Optical Timing Distribution System |
Daniel Sigg et al. |
Data Acquisition System
|
19 Oct 2015 |
| E1500401-v1 |
ECR: Monitoring of the EtherCAT field bus |
Daniel Sigg et al. |
State Control and Monitoring
|
01 Oct 2015 |
| E1300109-v4 |
EtherCAT End Channel Link List |
Patrick Thomas et al. |
State Control and Monitoring
|
21 Sep 2015 |
| E0900360-v7 |
CP COC CONTAINER ASSEMBLY BOM |
Kurt Buckland |
System Engineering
|
18 Sep 2015 |
| D990543-v2 |
LSC Photodiode Interface |
Daniel Sigg |
Sensing and Control
|
17 Sep 2015 |
| D0902001-v8 |
CP COC OPTIC CONTAINER ASSEMBLY |
Kurt Buckland |
System Engineering
|
09 Sep 2015 |
| D0900958-v7 |
GOLD COATING PATTERN END REACTION MASS BARREL |
Kurt Buckland |
Core Optics
System Engineering
|
02 Sep 2015 |
| D1000981-v3 |
aLIGO, GOLD COATING PATTERN, TCP (COMPENSATION PLATE) BARREL |
Kurt Buckland |
Core Optics
|
02 Sep 2015 |
| E0900113-v3 |
Compensation Plate Electro Static Drive gold coating specification |
GariLynn Billingsley |
Core Optics
Final Design
|
02 Sep 2015 |
| E0900112-v3 |
Compensation Plate Barrel gold coating specification |
GariLynn Billingsley |
Core Optics
Final Design
|
02 Sep 2015 |
| D080116-v2 |
End Reaction Mass (ERM) |
Russell Jones |
Suspensions
Final Design
|
02 Sep 2015 |
| D1000979-v3 |
D1000979_ALIGO, COC TCP (THIN COMPENSATION PLATE) SUBSTRATE |
Kurt Buckland |
Core Optics
|
01 Sep 2015 |
| E0900019-v2 |
Test procedure for the Clock, Gate, and DuoTone Signal Interface Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
27 Aug 2015 |
| E1500316-v2 |
TwinCAT Library for GPS Receivers |
Daniel Sigg |
State Control and Monitoring
|
19 Aug 2015 |
| D0900502-v5 |
AdvLIGO Systems, BSC5-H2 Top Level Chamber Assembly |
Jose Eduardo Chavez |
System Engineering
Final Design
|
19 Oct 2009 |
| D0900512-v11 |
aLIGO Systems, WBSC6-H2 Top Level Chamber Assembly |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
03 Aug 2015 |
| G1500506-v2 |
Advanced LIGO Automation with Guardian |
Jameson Graef Rollins |
State Control and Monitoring
|
02 Aug 2015 |
| D0900891-v2 |
RF AM Measurement |
Daniel Sigg |
Sensing and Control
|
07 Jul 2015 |
| T1500292-v1 |
Advanced LIGO Guardian Documentation |
Jameson Graef Rollins |
State Control and Monitoring
|
17 Jun 2015 |
| E1500022-v1 |
Test Procedure for Auxiliary Signals Concentrator 6 |
Daniel Sigg |
State Control and Monitoring
|
16 Jun 2015 |
| G1500668-v1 |
Squeezing now and in the future: the road to 10 dB |
Katherine Dooley et al. |
Meeting
Requirements
Integration
Basic R&D
Commissioning
Sensing and Control
Squeezer
|
01 Jun 2015 |
| T080194-v1 |
Dynamic Vibration Absorber |
Dennis Coyne |
Basic R&D
System Engineering
|
28 May 2015 |
| D0900848-v3 |
RF AM Stabilization Power |
Daniel Sigg |
Sensing and Control
|
27 May 2015 |
| D060461-v2 |
QUAD LOWER STRUCTURE, PEN TEST MASS PAD |
Joe ODell |
Suspensions
|
26 May 2015 |
| D060457-v2 |
QUAD LOWER STRUCTURE, ADJUSTABLE PAD ASSEMBLY SHORT |
Joe ODell |
Suspensions
|
26 May 2015 |
| D060455-v2 |
QUAD LOWER STRUCTURE X-BRACE |
Joe ODell |
Suspensions
|
26 May 2015 |
| D060446-v2 |
QUAD LOWER STRUCTURE, ADJUSTABLE PAD ASSEMBLY, LONG |
Joe ODell |
Suspensions
|
26 May 2015 |
| D060434-v2 |
SUS QUAD OUTER FACE PLATE LOWER STRUCTURE |
Joe ODell |
Suspensions
|
26 May 2015 |
| D080090-v3 |
ADVANCED LIGO, SUS, BLADE TIP STOP MOUNT, BS TOP STAGE |
Joe ODell et al. |
Suspensions
|
20 Apr 2015 |
| E1500016-v1 |
ECR: Move PEM H0,L0 channels to H1,L1 |
Robert Schofield et al. |
Data and Computing
|
08 Apr 2015 |
| E1200630-v3 |
TwinCAT Library for Auxiliary Channels |
Alexa N Staley |
State Control and Monitoring
|
06 Apr 2015 |
| T1500091-v1 |
3IFO PSL ISS Photodetector Array Inventory Peter King Email |
Gary Davis et al. |
Project Controls
|
20 Mar 2015 |
| T1500083-v1 |
3IFO PSL Table Contents Packing Lists/Inventory |
Gary Davis et al. |
System Engineering
Project Controls
|
04 Mar 2015 |
| D1000561-v2 |
RF AM Measurement Rear Mounting Plate |
Daniel Sigg |
Sensing and Control
|
25 Feb 2015 |
| D1000560-v2 |
RF AM Measurement Rear Panel |
Daniel Sigg |
Sensing and Control
|
25 Feb 2015 |
| D1000216-v2 |
EOM Driver Attenuator |
Daniel Sigg |
Sensing and Control
|
25 Feb 2015 |
| D0900847-v2 |
RF AM Stabilization Servo |
Daniel Sigg |
Sensing and Control
|
25 Feb 2015 |
| M1300468-v10 |
Acceptance Process for the Advanced LIGO Project |
Dennis Coyne et al. |
Policies
Project Controls
|
23 Feb 2015 |
| M070102-v2 |
M070102 Advanced LIGO Change Control Procedure |
Carol Wilkinson et al. |
Project Controls
Change Control
|
22 Feb 2015 |
| T1400316-v4 |
Instrument Science White Paper |
David McClelland et al. |
Seismic Isolation
Core Optics
Basic R&D
Auxiliary Optics
Suspensions
Input Optics
Sensing and Control
Laser Systems
Squeezer
|
10 Feb 2015 |
| T1000382-v2 |
Advanced LIGO Core Optics Material Design summary |
GariLynn Billingsley |
Core Optics
Final Design
|
09 Feb 2015 |
| E0900074-v3 |
Advanced LIGO Compensation Plate (CP) Coating Specification |
Rand Dannenberg |
Core Optics
Final Design
|
02 Feb 2015 |
| E1400104-x0 |
ECR: Replacing the Cart-Bias custom ramp parts with cdsFiltCrtl2 blocks |
Brian Lantz et al. |
Seismic Isolation
Integration
State Control and Monitoring
|
29 Jan 2015 |
| T1400733-v1 |
Tidal Controls in Advanced LIGO |
Daniel Sigg |
State Control and Monitoring
Sensing and Control
|
25 Jan 2015 |
| D1500029-v1 |
Auxiliary Signals Concentrator 6 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
23 Jan 2015 |
| D1500028-v1 |
Auxiliary Signals Concentrator 6 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
23 Jan 2015 |
| D1500027-v1 |
Auxiliary Signals Concentrator 6 |
Daniel Sigg |
State Control and Monitoring
|
23 Jan 2015 |
| E1400317-v2 |
End Station Controls Chassis 3 Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
23 Jan 2015 |
| D1400175-v2 |
EtherCAT End Station Chassis 3 |
Daniel Sigg |
State Control and Monitoring
|
23 Jan 2015 |
| E1500021-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 6 |
Daniel Sigg |
State Control and Monitoring
|
23 Jan 2015 |
| D1300495-v1 |
AEI style SHG Copper Crystal Holder |
Christian Graef et al. |
Basic R&D
Squeezer
|
22 Jan 2015 |
| G1500065-v2 |
Guardian “core” status and roadmap |
Jameson Graef Rollins |
State Control and Monitoring
|
16 Jan 2015 |
| D020373-v5 |
8 Channel Valve Driver Board |
Benjamin Abbott |
Seismic Isolation
|
14 Jan 2015 |
| D040424-v1 |
TTFSS Daughter Board |
Daniel Sigg et al. |
Laser Systems
|
01 Jan 2015 |
| D070140-v3 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, top stage blade wire clamp shim |
Joe ODell et al. |
Fabrication
Suspensions
Final Design
|
18 Dec 2014 |
| T1400736-v1 |
CDS workstation setup using Scientific Linux 6 |
Michael Thomas et al. |
Operations
Data and Computing
|
10 Dec 2014 |
| D0900442-v7 |
aLIGO Systems, BSC1-L1 Top Level Chamber Assembly |
Ignacio Romero et al. |
System Engineering
Final Design
|
10 Dec 2014 |
| T1300532-v2 |
Medm replacement rules for ISC |
Daniel Sigg et al. |
State Control and Monitoring
Sensing and Control
|
05 Dec 2014 |
| D080168-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD , CAN BODY, ETM PEN RE MASS CAN |
Joe ODell |
Suspensions
|
20 Nov 2014 |
| D060403-v8 |
Advanced LIGO, SUS, Quad Top Mass, TOP MASS - Main and Reaction Assembly Drawing |
Joe ODell et al. |
Suspensions
|
18 Nov 2014 |
| P1400193-v1 |
Enhancement of SHG for Squeezing in aLIGO: 2013 SURF |
Nathan Zhao |
Fabrication
Squeezer
|
08 Nov 2014 |
| E1400431-v1 |
TwinCAT Library for Fast Shutter Controls |
Daniel Sigg |
State Control and Monitoring
|
27 Oct 2014 |
| C1400943-v1 |
SOW LIGO Hanford DCS Computer Room Air Conditioning |
John Worden |
Procurements
Observatory Facilities
|
07 Oct 2014 |
| D1400304-v1 |
LHO DCS Facility HVAC Plan and Sections |
John Worden |
Observatory Facilities
|
30 Sep 2014 |
| D1400305-v1 |
LHO DCS Facility Reflected Ceiling Plan |
John Worden |
Observatory Facilities
|
30 Sep 2014 |
| D1400306-v1 |
LHO DCS Facility Curtain Plan and Details |
John Worden |
Observatory Facilities
|
30 Sep 2014 |
| D1400307-v1 |
LHO DCS Facility Schedules, Notes, and Details |
John Worden |
Observatory Facilities
|
30 Sep 2014 |
| D1400308-v1 |
LHO DCS Facility Electrical/Data Site Plan |
John Worden |
Observatory Facilities
|
30 Sep 2014 |
| P1400189-v1 |
Correlated Noise in LIGO Detectors from Schumann Resonance |
Ryan Horton et al. |
Project Controls
Calibration
Education, Outreach
|
25 Sep 2014 |
| G1400891-v3 |
aLIGO Guardian status update and remaining tasks |
Jameson Graef Rollins |
State Control and Monitoring
|
09 Sep 2014 |
| T1300734-v1 |
Simulating the Advanced LIGO Interferometer Using the Real Control Code |
Juan Castillo |
Project Controls
|
31 Aug 2014 |
| T1400222-v2 |
Characterization of Second Harmonic Generators for Advanced LIGO Squeezing |
Sheila Dwyer et al. |
Squeezer
|
31 Aug 2014 |
| T1000137-v3 |
Drag Wiping and First Contact |
Margot Hennig et al. |
Core Optics
|
27 Aug 2014 |
| T050036-v4 |
Pre-Stabilized Laser Design Requirements |
Richard Savage et al. |
Requirements
Laser Systems
|
20 Aug 2014 |
| G1400886-v1 |
Decoherence and degradation in quantum filter cavities |
John Miller et al. |
Basic R&D
Squeezer
|
17 Aug 2014 |
| T1300155-v2 |
Alignment sensing control signals of DRMI |
Keiko Kokeyama et al. |
Commissioning
Squeezer
|
15 Aug 2014 |
| P1400157-v1 |
SURF 2014 SHG Progress Report II |
Nathan Zhao et al. |
Squeezer
|
15 Aug 2014 |
| D1000980-v6 |
aLIGO, TCP OPTICS WITH PRISM ASSEMBLY |
Kurt Buckland et al. |
Core Optics
|
12 Aug 2014 |
| D060335-v4 |
Advanced LIGO, SUS, TOP MASS Quad N-Ptype, RECESSED 1/4" 20 UNC X 0.75" CAP HEAD |
Joe ODell et al. |
Suspensions
|
12 Aug 2014 |
| P1400148-v1 |
Techniques for Resonant Optical Interferometry with Applications to the Advanced LIGO Gravitaional Wave Detectors. |
Chris Mueller |
Commissioning
State Control and Monitoring
Input Optics
Sensing and Control
Laser Systems
Final Design
|
04 Aug 2014 |
| T1400461-v2 |
Advanced LIGO Guardian Progress and Remaining Tasks |
Jameson Graef Rollins |
State Control and Monitoring
|
31 Jul 2014 |
| E1400265-x0 |
aLIGO, Slow Controls, Chassis, End 3 |
Daniel Sigg |
State Control and Monitoring
|
22 Jul 2014 |
| G1400776-v1 |
Guardian Overview |
Jameson Graef Rollins |
State Control and Monitoring
|
16 Jul 2014 |
| D080535-v2 |
STS-2 Interface Chassis |
Benjamin Abbott |
Seismic Isolation
|
27 Jun 2014 |
| D070527-v1 |
DC Power Filter Board |
Benjamin Abbott |
System Engineering
|
27 Jun 2014 |
| D040019-v4 |
STS-2 Interface Board |
Benjamin Abbott |
Seismic Isolation
|
27 Jun 2014 |
| D0901473-v1 |
STS-2 to T240 Interface Board |
Benjamin Abbott |
Seismic Isolation
|
27 Jun 2014 |
| D080521-v4 |
HEPI Pier Interface Schematic and PCB |
Benjamin Abbott |
Seismic Isolation
|
25 Jun 2014 |
| C1001899-v1 |
Statement of Work (SOW) for D1002424 Vibration Absorber parts |
Kurt Buckland |
System Engineering
Sensing and Control
|
14 Oct 2010 |
| G1000125-v9 |
aLIGO BSC-ISI, HAM-ISI, and HEPI Basis and Naming Conventions |
Jeffrey Kissel et al. |
Seismic Isolation
Observatory Facilities
Vacuum
Installation
|
18 Jun 2014 |
| T1100608-v4 |
Guardian Developer's Guide |
Christopher Kucharczyk et al. |
Sensing and Control
Data and Computing
|
18 Jun 2014 |
| G1400654-v1 |
Advanced LIGO Guardian Status Update |
Jameson Graef Rollins |
State Control and Monitoring
|
13 Jun 2014 |
| D1400176-v1 |
End Station Chassis 3 Name Plate |
Daniel Sigg |
State Control and Monitoring
|
04 Jun 2014 |
| E1300934-x0 |
aLIGO, Slow Controls, Controllers, Photodiode Amplifier |
Daniel Sigg |
Auxiliary Optics
State Control and Monitoring
|
04 Jun 2014 |
| E090001-v1 |
Chassis Integration Plan Clock, Gate, and DuoTone Signal Interface Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
03 Jun 2014 |
| D080660-v3 |
D080660_ALIGO COC_BS_SUBSTRATE |
Calum Torrie |
Core Optics
Final Design
|
03 Jun 2014 |
| D0902346-v3 |
AdLIGO IQ Demodulator Cell |
Rich Abbott |
Basic R&D
Sensing and Control
|
03 Jun 2014 |
| T1300958-v4 |
Front-end Control State Implementation |
Stefan Ballmer et al. |
Data Acquisition System
State Control and Monitoring
|
22 May 2014 |
| T010007-v5 |
Cavity Optics Suspension Subsystem Design Requirements |
Mark Barton et al. |
Requirements
Suspensions
|
17 May 2014 |
| G1000552-v8 |
aLIGO DC Power Distribution Racks etal |
David Kinzel |
Observatory Facilities
Installation
|
13 May 2014 |
| D060409-v4 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, OSEM ECD UNIT |
Joe ODell |
Suspensions
|
30 Apr 2014 |
| D080005-v4 |
ADVANCED LIGO, SUS, THIS, BEAM SPLITTER TRIPLE, BS LOWER STRUCTURE |
Joe ODell |
Suspensions
|
22 Apr 2014 |
| D1100955-v1 |
Binary Switch Board |
Benjamin Abbott |
Data and Computing
|
18 Apr 2014 |
| T1400284-v2 |
Glitches in the Blend Switch - Origin and Fix |
Brian Lantz |
Seismic Isolation
Integration
State Control and Monitoring
Suspensions
|
17 Apr 2014 |
| E1300323-x0 |
aLIGO, Automation |
Jameson Graef Rollins |
State Control and Monitoring
|
17 Apr 2014 |
| E1400210-x0 |
aLIGO, Automation, Control State Definition |
Daniel Sigg |
State Control and Monitoring
|
17 Apr 2014 |
| D1002538-v5 |
aLIGO TCS Simplified Glass Former for Ring Heater Element |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Final Design
|
14 Apr 2014 |
| D060422-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| T0900485-v3 |
FET vs. Diode-ring Demodulator Noise Comparison |
Rich Abbott |
Basic R&D
Sensing and Control
|
27 Mar 2014 |
| D1201099-v1 |
Low Noise Voltage-Controlled Oscillator Chassis |
Gerardo Moreno et al. |
Data and Computing
|
27 Mar 2014 |
| P1300006-v1 |
[Thesis] Quantum noise reduction using squeezed states in LIGO |
Sheila Dwyer |
Squeezer
|
25 Mar 2014 |
| D070234-v4 |
Advanced LIGO, SUS, Penultimate Mass, Pen Re Mass Magnets (External Shielded Magnets) |
Joe ODell et al. |
Suspensions
|
11 Mar 2014 |
| G1301067-v1 |
PEM update, September 2013 |
Robert Schofield |
Observatory Facilities
|
07 Mar 2014 |
| E1000884-v5 |
BOM and Drawing Tree, aLIGO TCS H2 CO2 Laser Steering Mirror Assemblies for BSC7 and BSC8 |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
07 Mar 2014 |
| D1000231-v7 |
Custom Cable V25T-36 v7, Dual QPD cable assembly |
Rich Abbott et al. |
Fabrication
Sensing and Control
|
06 Mar 2014 |
| D070237-v2 |
Advanced LIGO, SUS, Pen Re Mass Magnets, Magnet Base (External Shielded Magnets) |
Joe ODell |
Suspensions
|
05 Mar 2014 |
| D1001521-v6 |
Cable Assy, Terminal Block to Upper Quad |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
03 Mar 2014 |
| D1100546-v2 |
Legacy WFS Interface Board |
Rich Abbott |
Sensing and Control
Final Design
|
21 Feb 2014 |
| D060355-v3 |
Advanced LIGO, SUS, Quad N-Ptype, Dummy Test Mass Assembly |
Joe ODell |
Suspensions
|
18 Feb 2014 |
| D1001517-v6 |
TCS Ring Heater In-Vac Cable Assembly |
Christopher Guido et al. |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
12 Feb 2014 |
| T070189-v3 |
Design Specifications for the OMC Suspension |
Norna Robertson et al. |
Requirements
Suspensions
|
07 Feb 2014 |
| D080659-v3 |
D080659_ALIGO COC_CP_SUBSTRATE |
Calum Torrie |
Core Optics
Final Design
|
07 Feb 2014 |
| D070220-v5 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, UIM Mass Top Wire Clamp |
Joe ODell et al. |
Fabrication
Suspensions
Final Design
Installation
|
06 Feb 2014 |
| G1301210-v1 |
Software Watchdogs for SUS + ISI + HEPI |
Brian Lantz et al. |
Seismic Isolation
Integration
Suspensions
Data and Computing
|
29 Jan 2014 |
| D0900360-v13 |
aLIGO Systems, WBSC8-H2 Top Level Chamber Assembly |
Jose Eduardo Chavez |
System Engineering
Final Design
|
23 Jan 2014 |
| D0901137-v5 |
aLIGO Systems, BSC1-H1 Top Level Chamber Assembly |
Jose Eduardo Chavez |
System Engineering
Final Design
|
23 Jan 2014 |
| G1300769-v2 |
HAM-ISI Guardian State Evolution |
Brian Lantz et al. |
Seismic Isolation
Conceptual Design
State Control and Monitoring
|
20 Jan 2014 |
| T1300629-x0 |
SEI Guardians |
Brian Lantz |
Seismic Isolation
Commissioning
State Control and Monitoring
|
20 Jan 2014 |
| T1300435-v1 |
Suspension Module Guardian Design |
Jeffrey Kissel et al. |
Commissioning
State Control and Monitoring
Suspensions
Preliminary Design
|
20 Jan 2014 |
| T1300884-v3 |
Advanced LIGO Automation Requirements |
Jameson Graef Rollins |
Requirements
State Control and Monitoring
|
20 Jan 2014 |
| D1400007-v1 |
aLIGO DC Breaker Switch Box |
Benjamin Abbott |
Observatory Facilities
|
15 Jan 2014 |
| G1301311-v1 |
aLIGO Guardian Synopsis and Status Update |
Jameson Graef Rollins |
State Control and Monitoring
|
19 Dec 2013 |
| T0900555-v6 |
Error Estimation of the LIGO Response Function |
Jeffrey Kissel |
Modelling
Sensing and Control
Calibration
|
18 Dec 2013 |
| D060394-v3 |
SPACER UI MAGNET AND FLAG, aLIGO SUS |
Joe ODell et al. |
Suspensions
Final Design
|
18 Dec 2013 |
| E1300935-v1 |
Photodiode Amplifier Wiring Diagram |
Daniel Sigg |
Auxiliary Optics
State Control and Monitoring
|
11 Dec 2013 |
| G1300530-v2 |
The aLIGO Guardian |
Jeffrey Kissel |
Commissioning
State Control and Monitoring
Preliminary Design
|
11 Dec 2013 |
| D1301019-v1 |
Photodiode Amplifier Rear Panel |
Daniel Sigg |
Auxiliary Optics
State Control and Monitoring
|
10 Dec 2013 |
| D1301018-v1 |
Photodiode Amplifier Front Panel |
Daniel Sigg |
Auxiliary Optics
State Control and Monitoring
|
10 Dec 2013 |
| D1301021-v1 |
Photodiode Amplifier EtherCAT |
Daniel Sigg |
Auxiliary Optics
State Control and Monitoring
|
09 Dec 2013 |
| T0900423-v4 |
ISC Quadrant Photodetector Design |
Rich Abbott et al. |
Basic R&D
Sensing and Control
|
09 Dec 2013 |
| D1201289-v1 |
EtherCAT Adapter IDC-64 |
Daniel Sigg |
State Control and Monitoring
|
05 Dec 2013 |
| D1201290-v1 |
EtherCAT Panel IDC-64 |
Daniel Sigg |
State Control and Monitoring
|
05 Dec 2013 |
| D060337-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, PENULTIMATE MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| G1300850-v1 |
Simulating the Advanced LIGO Interferometer Using the Real Control Code |
Juan Castillo |
Project Controls
|
27 Nov 2013 |
| T1000044-v3 |
aLIGO I&Q RF Demodulator Design |
Rich Abbott |
Sensing and Control
Final Design
|
25 Nov 2013 |
| D1102171-v2 |
aLIGO TCS CO2P Steering Mirror 2, H1-L1 |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
05 Nov 2013 |
| D1300975-v1 |
EtherCAT Panel Fast Shutter |
Daniel Sigg |
State Control and Monitoring
|
03 Nov 2013 |
| D1100495-v3 |
aLIGO TCS WASHER, CLAMP RING |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
01 Nov 2013 |
| E080541-v6 |
Quick Start Guide Optical Timing Distribution System Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
28 Oct 2013 |
| T1300683-v1 |
Tidal Prediction for Advanced LIGO: Final Report |
Noah Kurinsky et al. |
Modelling
State Control and Monitoring
|
27 Oct 2013 |
| E1000295-v8 |
aLIGO TCS Ring Heater Assembies, Formal Drawing Tree & BOM Reference |
Guido Mueller et al. |
Incoming Inspection
Auxiliary Optics
Fabrication
Vacuum
|
25 Oct 2013 |
| E1300810-x0 |
aLIGO, Automation, State Diagrams |
Sheila Dwyer |
State Control and Monitoring
|
24 Oct 2013 |
| E1300790-v1 |
TwinCAT Library for Photodetectors |
Alexa N Staley et al. |
State Control and Monitoring
|
16 Oct 2013 |
| E1300787-v1 |
TwinCAT Library for Summing Node |
Daniel Sigg et al. |
State Control and Monitoring
|
16 Oct 2013 |
| E1300786-v1 |
TwinCAT Library for Rotation Stage |
Alexa N Staley et al. |
State Control and Monitoring
|
16 Oct 2013 |
| E1300783-v1 |
TwinCAT Library for Save/Restore |
Alexa N Staley et al. |
State Control and Monitoring
|
15 Oct 2013 |
| E1300782-v1 |
TwinCAT Library for PSL Environment |
Alexa N Staley et al. |
State Control and Monitoring
|
15 Oct 2013 |
| E1300779-v1 |
TwinCAT Library for LTC |
Alexa N Staley et al. |
State Control and Monitoring
|
15 Oct 2013 |
| E1300778-v1 |
TwinCAT Library for Laser Power |
Alexa N Staley et al. |
State Control and Monitoring
|
15 Oct 2013 |
| E1300777-v1 |
TwinCAT Library for Fiber Polarization Correction |
Alexa N Staley et al. |
State Control and Monitoring
|
15 Oct 2013 |
| E1300776-v1 |
TwinCAT Library for Fiber Distribution |
Alexa N Staley et al. |
State Control and Monitoring
|
15 Oct 2013 |
| E1300430-v3 |
TwinCAT Library for ALS Communication |
Sheila Dwyer |
State Control and Monitoring
|
15 Oct 2013 |
| T1300175-v3 |
Installation of TwinCAT Targets |
Daniel Sigg |
State Control and Monitoring
|
14 Oct 2013 |
| D0901146-v5 |
aLIGO Systems, BSC3-H1 Top Level Chamber Assembly |
Jose Eduardo Chavez |
System Engineering
Final Design
|
09 Oct 2013 |
| D070539-v2 |
Advanced LIGO, SUS, Quad ITM/ETM, Implementation Ring Reaction Chain |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| T0900080-v1 |
OMC Suspension Advanced LIGO Test Plan |
Norna Robertson et al. |
System Test
Suspensions
|
06 Sep 2013 |
| E1200626-v2 |
TwinCAT Library for Common Mode Servo Board |
Alexa N Staley |
State Control and Monitoring
|
04 Sep 2013 |
| E1200631-v2 |
TwinCAT Library for Shutter Controls |
Alexa N Staley |
State Control and Monitoring
|
04 Sep 2013 |
| E1200435-v3 |
TwinCAT Library for RF Amplifiers, Dividers and Doublers |
Daniel Sigg et al. |
State Control and Monitoring
|
04 Sep 2013 |
| E1200628-v2 |
TwinCAT Library for PZT Mirrors |
Alexa N Staley |
State Control and Monitoring
|
04 Sep 2013 |
| D1002963-v1 |
EtherCAT Panel Low Noise VCO |
Daniel Sigg |
Sensing and Control
|
30 Aug 2013 |
| G1300834-v1 |
Tidal Prediction for Advanced LIGO: Final Presentation |
Noah Kurinsky |
Modelling
State Control and Monitoring
|
26 Aug 2013 |
| G1300872-v1 |
aLIGO Guardian Review |
Jameson Graef Rollins |
State Control and Monitoring
|
26 Aug 2013 |
| C1302049-v3 |
Statement of Work for insulation removal at LHO |
John Worden |
Procurements
Observatory Facilities
Vacuum
|
26 Aug 2013 |
| D080534-x0 |
Timing Master/FanOut Assembly Drawing and Parts List |
Daniel Sigg |
Data Acquisition System
|
01 Feb 2009 |
| D060323-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, TRANSVERSE OSEM POSITION ADJUSTMENT PLATE |
Joe ODell et al. |
Suspensions
Final Design
|
23 Aug 2013 |
| D060329-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, Top Stage STIFF BACK |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| E0900301-v3 |
IOO Faraday Isolator Assembly and Certification Procedures |
David Tanner et al. |
Detector
Fabrication
Input Optics
|
13 Dec 2011 |
| P1200041-v19 |
Enhancing the sensitivity of the LIGO gravitational wave detector by using squeezed states of light |
Daniel Sigg et al. |
Basic R&D
Squeezer
|
07 Aug 2013 |
| D060356-v2 |
Advanced LIGO, SUS, Quad N-Ptype, Dummy Test Reaction Mass Assembly Tooling |
Joe ODell |
Suspensions
|
05 Aug 2013 |
| D1101292-v3 |
H1-L1 SM1 Azimuth Support Bracket |
Mindy Jacobson |
Assembly
Auxiliary Optics
Fabrication
Vacuum
|
26 Jul 2013 |
| D070247-v3 |
Advanced LIGO, SUS, Quad ITM/ETM, Tablecloth Pads (Upper Structure) |
Joe ODell et al. |
Auxiliary Optics
Final Design
|
17 Jul 2013 |
| D070222-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Pen Re Mass Cable Clamp |
Joe ODell |
Suspensions
|
05 Sep 2012 |
| D080240-v2 |
Adv LIGO, ALIGO Quad, THIS, PEN RE MASS BUMP STOP ASSEMBLY, PENULTIMATE REACTION MASS |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D060349-v3 |
Advanced LIGO, SUS, N-Ptype PENULTIMATE MASS, LIGO 1 OSEM MOUNT (FOR PENRE MASS) |
Joe ODell et al. |
Suspensions
|
12 Nov 2012 |
| D060352-v2 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, PITCH MASS |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060332-v3 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, WIRE CLAMP TOP STAGE |
Joe ODell |
Suspensions
|
08 Jul 2013 |
| E1300580-v1 |
Shutter Controller Modifications |
Daniel Sigg |
State Control and Monitoring
|
08 Jul 2013 |
| D060316-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, OSEM AND ECD ADJUSTER |
Joe ODell |
Suspensions
|
31 Mar 2011 |
| D060320-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, OSEM ADJUSTMENT PLATE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060322-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, TRANSVERSE OSEM ADJUSTER |
Joe ODell |
Suspensions
Final Design
|
29 Sep 2010 |
| G1300699-v2 |
Squeezing Angle fluctuations in gravitational wave detectors |
Sheila Dwyer |
Meeting
Squeezer
|
07 Jul 2013 |
| G1300698-v2 |
Quantum noise reduction using squeezed states in LIGO |
Sheila Dwyer et al. |
Meeting
Squeezer
|
07 Jul 2013 |
| E0900140-v3 |
Advanced LIGO End Reaction Mass Coating Specification |
Margot Hennig |
Core Optics
Final Design
|
04 Jul 2013 |
| D060310-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, Tablecloth (Noise Prototype) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060324-v5 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, BLADE CARTRIDGE Assembly |
Joe ODell |
Suspensions
|
03 Jul 2013 |
| D1002431-v2 |
aLIGO TCS CO2 Laser In-Vacuum Steering Optics Assembly, H2, BSC8 |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
09 Feb 2011 |
| D1001519-v8 |
Cable Assy, Lower Ring Heater Segment |
Mindy Jacobson et al. |
Assembly
Auxiliary Optics
Fabrication
Vacuum
Final Design
Cleaning
|
19 Jun 2013 |
| E1300442-v1 |
TwinCAT Library for Real-time System Communication |
Daniel Sigg |
State Control and Monitoring
|
18 Jun 2013 |
| D070107-v2 |
HAM6 Septum Plate for ELIGO |
Jim Warner |
Vacuum
Final Design
|
10 Jun 2013 |
| D1101977-v3 |
End Station Controls Chassis 2 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
06 Jun 2013 |
| D060392-v1 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, MAGNET RETAINER (MODIFIED 1/4-20 HEX HEAD SCREW 15" LONG) |
Joe ODell |
Suspensions
|
10 Aug 2009 |
| D060393-v1 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS MAGNET AND FLAG MOUNT |
Joe ODell |
Suspensions
|
17 Aug 2009 |
| S0900347-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900345-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| G1300589-v1 |
Squeezed Light Techniques for Gravitational Wave Detection |
Daniel Sigg |
Squeezer
|
29 May 2013 |
| D020133-v1 |
Lower Blade Wire Clamp Plate (OMCS) |
Derek Bridges |
Suspensions
Final Design
|
28 May 2013 |
| D020132-v2 |
Lower Blade Wire Clamp (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
28 May 2013 |
| D070020-v2 |
Magnet Holder (OMCS) |
Derek Bridges |
Suspensions
Preliminary Design
|
28 May 2013 |
| D060491-v2 |
Main Section, Upper Mass (OMCS) |
Derek Bridges |
Suspensions
Final Design
|
28 May 2013 |
| D070022-v1 |
Wire Clamp, Top Blade (OMCS) |
Michael Meyer |
Suspensions
Final Design
|
28 May 2013 |
| D020139-v1 |
Wire Clamp Plate, Upper Mass (OMCS) |
Michael Meyer |
Suspensions
Final Design
|
28 May 2013 |
| D020309-v1 |
Wire Clamp Plate with Groove, Upper Mass (OMCS) |
Michael Meyer |
Suspensions
Final Design
|
28 May 2013 |
| D070030-v1 |
C-Clamp for Top Wire (OMCS) |
Michael Meyer |
Suspensions
Final Design
|
28 May 2013 |
| D030042-v1 |
Wire Clamp Plate, Upper Blade (OMCS) |
Michael Meyer |
Suspensions
Final Design
|
28 May 2013 |
| D030450-v2 |
Pull Plate, Rotational Adjuster (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
28 May 2013 |
| D030449-v2 |
Push Plate, Rotational Adjuster (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
28 May 2013 |
| D030447-v2 |
Rotating Plate, Rotational Adjuster (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
28 May 2013 |
| D030448-v3 |
Base Plate, Rotational Adjuster (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
28 May 2013 |
| D020336-v2 |
Lower Blade Clamp, Lower Side, 2.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020313-v2 |
Lower Blade Clamp, Lower Side, 2.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020335-v2 |
Lower Blade Clamp, Lower Side, 1.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020334-v2 |
Lower Blade Clamp, Lower Side, 1.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020333-v2 |
Lower Blade Clamp, Lower Side, 0.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020308-v2 |
Lower Blade Clamp, Lower Side, 0.0 Degree (HSTS/OMCS) |
Derek Bridges |
Suspensions
Final Design
|
22 May 2013 |
| D020340-v2 |
Lower Blade Clamp, Upper Side, 2.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020314-v2 |
Lower Blade Clamp, Upper Side, 2.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020339-v2 |
Lower Blade Clamp, Upper Side, 1.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020338-v2 |
Lower Blade Clamp, Upper Side, 1.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020337-v2 |
Lower Blade Clamp, Upper Side, 0.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020119-v2 |
Lower Blade Clamp, Upper Side, 0.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020680-v2 |
Upper Blade Clamp Shim, 2mm (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020679-v2 |
Upper Blade Clamp Shim, 1mm (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030466-v2 |
Upper Blade Clamp, Lower Side, 3.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030465-v2 |
Upper Blade Clamp, Lower Side, 3.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030463-v2 |
Upper Blade Clamp, Lower Side, 2.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030462-v2 |
Upper Blade Clamp, Lower Side, 1.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030461-v2 |
Upper Blade Clamp, Lower Side, 1.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030460-v2 |
Upper Blade Clamp, Lower Side, 0.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030459-v3 |
Upper Blade Clamp, Lower Side, 0.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030464-v2 |
Upper Blade Clamp, Lower Side, 2.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020690-v2 |
Upper Blade Clamp, Upper Side, 3.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020689-v2 |
Upper Blade Clamp, Upper Side, 3.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020328-v2 |
Upper Blade Clamp, Upper Side, 2.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020312-v2 |
Upper Blade Clamp, Upper Side, 2.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020327-v2 |
Upper Blade Clamp, Upper Side, 1.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020326-v2 |
Upper Blade Clamp, Upper Side, 1.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020325-v2 |
Upper Blade Clamp, Upper Side, 0.5 Degree (HSTS/OMCS) |
Michael Meyer |
Suspensions
Final Design
|
21 May 2013 |
| D020116-v2 |
Upper Blade Clamp, Upper Side, 0.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D070035-v4 |
Metal Bench Assembly (OMCS) |
Derek Bridges |
Suspensions
Sensing and Control
|
14 May 2013 |
| D060537-v4 |
Lower Wire Assembly (OMCS) |
Derek Bridges |
Suspensions
|
14 May 2013 |
| D060536-v1 |
Upper Wire Assembly (OMCS) |
Christopher Echols |
Suspensions
|
14 May 2013 |
| D030451-v2 |
Rotational Adjuster Assembly (OMCS) |
Derek Bridges |
Suspensions
Final Design
|
14 May 2013 |
| D1300170-v2 |
EtherCAT Rotation Stage Interface Front Panel (rack) |
Daniel Sigg |
State Control and Monitoring
|
30 Apr 2013 |
| D1300172-v2 |
EtherCAT Rotation Stage Interface Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
30 Apr 2013 |
| D1300171-v2 |
EtherCAT Rotation Stage Interface Front Panel (stand-alone) |
Daniel Sigg |
State Control and Monitoring
|
30 Apr 2013 |
| D1300174-v2 |
EtherCAT Rotation Stage Interface Top Panel |
Daniel Sigg |
State Control and Monitoring
|
30 Apr 2013 |
| D070219-v3 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Mass Wire Clamp Base |
Joe ODell et al. |
Suspensions
|
29 Apr 2013 |
| D070250-v4 |
Base Plate, Lower Wire Jig (OMCS) |
Derek Bridges |
Suspensions
Final Design
|
17 Apr 2013 |
| D020677-v3 |
Library of Clamps (HSTS/OMCS) |
Michael Meyer |
Suspensions
Final Design
|
17 Apr 2013 |
| D070139-v1 |
Upper Wire Jig Assembly (OMCS) |
Michael Meyer |
Suspensions
Final Design
|
17 Apr 2013 |
| D0900308-v4 |
Structural Weldment (OMCS) |
Michael Meyer et al. |
Suspensions
Final Design
|
16 Apr 2013 |
| G1300119-v2 |
Friendly Power Shutdown for LLO Corner Buildings |
David Kinzel |
Seismic Isolation
Core Optics
Auxiliary Optics
Data Acquisition System
Commissioning
Suspensions
Input Optics
Observatory Facilities
System Engineering
Sensing and Control
Policies
Vacuum
Laser Systems
Data and Computing
|
11 Apr 2013 |
| D1100911-v3 |
aLIGO TCS URS50 MOUNT |
Mindy Jacobson |
Auxiliary Optics
Input Optics
Preliminary Design
|
04 Apr 2013 |
| T070219-v1 |
LIGO Data Grid Reference Operating System |
Erik Katsavounidis et al. |
Policies
Data and Computing
|
27 Mar 2013 |
| E1200875-v2 |
Test Procedure for Auxiliary Signals Concentrator 5 |
Daniel Sigg |
State Control and Monitoring
|
27 Mar 2013 |
| D070538-v2 |
Advanced LIGO, SUS, Quad ITM/ETM, Implementation Ring Test Chain |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D1201231-v5 |
LLO Rack & Cable Tray Layout, Y-End, BSC5-L1 |
Kurt Buckland et al. |
Observatory Facilities
System Engineering
|
18 Mar 2013 |
| F1100002-v4 |
Winding Template, aLIGO TCS Ring Heater Elements |
Mindy Jacobson et al. |
Incoming Inspection
Auxiliary Optics
Fabrication
Vacuum
|
07 Mar 2013 |
| E1200597-x0 |
aLIGO, AOS, TCS, Slow Controls, EtherCAT Hardware |
Mindy Jacobson et al. |
Auxiliary Optics
State Control and Monitoring
|
04 Mar 2013 |
| D1300131-v1 |
EtherCAT Rotation Stage Interface |
Daniel Sigg |
State Control and Monitoring
|
01 Mar 2013 |
| T010076-v2 |
Advanced LIGO Optical Layout Overview |
Dennis Coyne |
System Engineering
Preliminary Design
|
28 Feb 2013 |
| D1001371-v3 |
Timing Comparator Front Panel |
Ilya Belopolski |
Data Acquisition System
|
27 Feb 2013 |
| E1300144-x0 |
PSL Laser and Ante Room Chassis |
Daniel Sigg |
State Control and Monitoring
Laser Systems
|
26 Feb 2013 |
| E1300145-x0 |
PSL Diode and Chiller Room Chassis |
Daniel Sigg |
State Control and Monitoring
Laser Systems
|
26 Feb 2013 |
| D1300175-v1 |
EtherCAT Rotation Stage Interface Mounting Plate |
Daniel Sigg |
State Control and Monitoring
|
25 Feb 2013 |
| D1300173-v1 |
EtherCAT Rotation Stage Interface Bottom Panel |
Daniel Sigg |
State Control and Monitoring
|
25 Feb 2013 |
| D1200265-v3 |
Elevation Support Web, CO2 Laser Projection Steering Mirror 2, H1-L1 |
Mindy Jacobson et al. |
Assembly
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
22 Feb 2013 |
| D1102384-v3 |
aLIGO TCS CO2P SM2 ASSY LONG SUPPORT |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
22 Feb 2013 |
| E1201068-v1 |
Test Report for the Shutter Controllers for Advanced LIGO |
Daniel Sigg |
State Control and Monitoring
|
22 Feb 2013 |
| D1101120-v2 |
Name plate Laser/Ante PSL |
Jose Puente |
Laser Systems
Installation
|
22 Feb 2013 |
| D1101121-v2 |
PSL/IO/TCS Chassis Name Plate |
Jose Puente |
Laser Systems
Installation
|
22 Feb 2013 |
| D1300165-v1 |
EtherCAT Panel Motor Supply |
Daniel Sigg |
State Control and Monitoring
|
22 Feb 2013 |
| D1300132-v1 |
EtherCAT Panel Rotation Stage |
Daniel Sigg |
State Control and Monitoring
|
20 Feb 2013 |
| D1300143-v1 |
EtherCAT Panel IO PZT |
Daniel Sigg |
State Control and Monitoring
|
20 Feb 2013 |
| D1101771-v2 |
aLIGO TCS CO2P SM1 Wedge Support, H1-L1 |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
20 Feb 2013 |
| E070079-v2 |
SUBSTRATE, ALIGO INPUT MODE CLEANER CURVED MIRROR (IMCC) |
Rodica Martin et al. |
Input Optics
Final Design
|
19 Feb 2013 |
| T1000334-v2 |
Review Report Interferometer Sensing and Control Final Design |
Robert Schofield et al. |
Sensing and Control
|
17 Feb 2013 |
| D1300133-x0 |
EtherCAT Panel IO PZT |
Daniel Sigg |
State Control and Monitoring
|
14 Feb 2013 |
| D1201418-v3 |
EtherCAT Beam Diverter Test Rig Back Panel |
Jax Sanders |
State Control and Monitoring
|
08 Feb 2013 |
| D1201416-v1 |
EtherCAT Beam Diverter Test Rig |
Jax Sanders |
State Control and Monitoring
|
08 Feb 2013 |
| D1201417-v3 |
EtherCAT Beam Diverter Test Rig Front Panel |
Jax Sanders et al. |
State Control and Monitoring
|
07 Feb 2013 |
| E1200424-v5 |
TwinCAT Library for ISC Whitening Chassis |
Daniel Sigg |
State Control and Monitoring
|
24 Jan 2013 |
| C1300165-v1 |
Specification for Installation WA and LA LIGO Site |
Carol Wilkinson |
Procurements
Observatory Facilities
Installation
|
24 Jan 2013 |
| D1201535-v1 |
Interlocks/Lighting Feedthrough Panel (Left Side) |
Daniel Sigg |
State Control and Monitoring
|
18 Jan 2013 |
| G1300033-v1 |
Quantum noise reduction using squeezed states in LIGO |
Sheila Dwyer |
Squeezer
|
16 Jan 2013 |
| D1100682-v3 |
EtherCAT End Station Chassis 2 |
Daniel Sigg |
State Control and Monitoring
|
08 Jan 2013 |
| E1101029-v3 |
End Station Controls Chassis 2 Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
08 Jan 2013 |
| D1201354-v2 |
Auxiliary Signals Concentrator 5 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
08 Jan 2013 |
| D1201353-v2 |
Auxiliary Signals Concentrator 5 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
08 Jan 2013 |
| D1201352-v2 |
Auxiliary Signals Concentrator 5 |
Daniel Sigg |
State Control and Monitoring
|
08 Jan 2013 |
| D1100539-v2 |
aLIGO TCS .25'' Thick Optical Window |
Alexander Lynch et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
07 Jan 2013 |
| D060460-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ADJUSTABLE PAD, ADJUSTABLE PAD ASSY (SHORT) |
Joe ODell |
Suspensions
|
07 Jan 2013 |
| D060459-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ADJUSTABLE PAD JAW, SHORT |
Joe ODell |
Suspensions
|
07 Jan 2013 |
| D060458-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, BASE BAR (ADJUSTABLE STOP MECHANISM) |
Joe ODell |
Suspensions
|
07 Jan 2013 |
| D1101294-v3 |
H1-L1 SM1 Azimuth Bracket |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
19 Dec 2012 |
| D060492-v4 |
Advanced LIGO, SUS, Quad ETM/ITM, Upper Structure Weldment |
Joe ODell |
Suspensions
Final Design
|
18 Dec 2012 |
| D1002842-v1 |
aLIGO Installation, LLO X-End Station, Cartridge & Cleanroom, Layout |
Brian O'Reilly et al. |
Observatory Facilities
Installation
|
18 Dec 2012 |
| E1201078-x0 |
aLIGO, ISC, Electronics, Beam Diverter Tester |
Daniel Sigg |
State Control and Monitoring
|
03 Dec 2012 |
| D1201482-v1 |
EtherCAT TEC Interface |
Daniel Sigg |
State Control and Monitoring
|
16 Nov 2012 |
| D1201359-v1 |
EtherCAT TEC Driver |
Daniel Sigg |
State Control and Monitoring
|
16 Nov 2012 |
| D060348-v3 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, OSEM TRANSLATION PLATE, ETM PEN RE MASS CAN |
Joe ODell et al. |
Suspensions
|
12 Nov 2012 |
| D060351-v3 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, BASE PLATE, LIGO 1 OSEM MOUNT |
Joe ODell et al. |
Suspensions
|
12 Nov 2012 |
| E1100897-v1 |
EtherCAT H1 4km Remote Access Controls Chassis Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
26 Oct 2012 |
| E0900073-v3 |
Advanced LIGO Beam Splitter (BS) Coating Specification |
Rand Dannenberg |
Core Optics
Final Design
|
20 Oct 2012 |
| D1000587-v3 |
5 AXIS INSTALLATION TABLE on CART - Historical Reference Only |
Calum Torrie |
System Engineering
|
18 Oct 2012 |
| E1200003-v2 |
Formal Drawing Tree & BOM, aLIGO TCS CO2 Laser Projection Steering Mirror 2, H1/L1 |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
18 Oct 2012 |
| T080261-v3 |
Building L4-C Pods |
Stephany Foley et al. |
Seismic Isolation
Final Design
|
12 Oct 2012 |
| D060410-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, OSEM MAGNET ASSEMBLY |
Joe ODell |
Suspensions
|
12 Oct 2012 |
| D1102077-v2 |
Washer Plate, Upper UHV Ring Heater Cable Connector Bracket |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
Installation
|
10 Oct 2012 |
| D1102074-v2 |
Nut Plate, Upper UHV Ring Heater Cable Connector Bracket |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
Installation
|
10 Oct 2012 |
| E1101044-v3 |
BOM and Drawing Tree, aLIGO TCS CO2P Steering Mirror 1 Assembly, H1/L1 |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
10 Oct 2012 |
| D070337-v8 |
Bottom Mass Assembly, HLTS |
Derek Bridges |
Suspensions
Final Design
|
09 Oct 2012 |
| D1201340-v1 |
Corner Station Controls Chassis 5 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
04 Oct 2012 |
| D1201360-v1 |
EtherCAT Panel for TEC Driver |
Daniel Sigg |
State Control and Monitoring
|
04 Oct 2012 |
| E1200375-x0 |
aLIGO, Slow Controls, Chassis, Corner 5 |
Daniel Sigg |
State Control and Monitoring
|
03 Oct 2012 |
| E1200874-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 5 |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| E1200873-v1 |
Test Procedure for Auxiliary Signals Concentrator 4 |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| D1201351-v1 |
Auxiliary Signals Concentrator 4 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| D1201345-v1 |
Auxiliary Signals Concentrator 3 |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| E1200872-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 4 |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| E1200868-v1 |
Test Procedure for Auxiliary Signals Concentrator 3 |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| E1200867-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 3 |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| D1201347-v1 |
Auxiliary Signals Concentrator 3 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
01 Oct 2012 |
| D1201346-v1 |
Auxiliary Signals Concentrator 3 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
01 Oct 2012 |
| G1100150-v3 |
LLO Safety Document Emphasis |
David Kinzel |
Safety
Laser Systems
Installation
|
25 Sep 2012 |
| D080241-v2 |
Adv. LIGO, SUS, Earthquake Stop Assembly |
Joe ODell |
Suspensions
Final Design
|
10 Sep 2012 |
| D030025-v1 |
Screw, Socket Head Cap, #8-32 UNC-2A X 1 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Fabrication
System Engineering
|
09 Sep 2012 |
| D070217-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Upper Structure Stay Wire Clamp |
Joe ODell |
Suspensions
|
09 Sep 2012 |
| D070214-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Top Ring Wire Clamp |
Joe ODell |
Suspensions
|
09 Sep 2012 |
| D060475-v4 |
ADVANCED LIGO, SUS, EARTHQUAKE-STOP MOUNTS-LONG, LOWER STRUCTURE |
Joe ODell et al. |
Suspensions
Final Design
|
09 Sep 2012 |
| D060390-v2 |
Advanced LIGO, SUS, Quad N-Ptype UI Mass, Wire Clamp Body Top Wire |
Joe ODell |
Suspensions
|
07 Sep 2012 |
| D070225-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Mass Wire Clamp |
Joe ODell |
Suspensions
|
07 Sep 2012 |
| D070221-v3 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, UIM Mass Top Wire Clamp Assy. |
Joe ODell et al. |
Suspensions
Final Design
|
07 Sep 2012 |
| D070218-v3 |
ALIGO, SUS, Quad, Wiring Harness, Mass Wire Clamp |
Joe ODell et al. |
Fabrication
Final Design
|
07 Sep 2012 |
| D060336-v4 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, 2MM CAM, OSEM ADJUSTER |
Joe ODell et al. |
Suspensions
Final Design
|
07 Sep 2012 |
| D060389-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, ADJUSTER UI MASS OSEM MOUNT |
Joe ODell |
Suspensions
|
07 Sep 2012 |
| D060387-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS OSEM MOUNT |
Joe ODell |
Suspensions
|
07 Sep 2012 |
| D1101092-v3 |
aLIGO Septum Viewport Assembly, wedged |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
30 Aug 2012 |
| D080163-v1 |
Advanced LIGO, SUS, Output Mode Cleaner, OMC Crossbar Assembly |
Michael Meyer |
Suspensions
|
27 Aug 2012 |
| D1100999-v4 |
aLIGO, high quality, non-wedged, 6" Viewport Assembly |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
22 Aug 2012 |
| D1200681-v4 |
aLIGO Photon Calibrator Laser Mounting Block |
Jonathan Berliner |
Auxiliary Optics
|
21 Aug 2012 |
| D1000225-v7 |
CUSTOM CABLE V25A-TBD (Various Lengths to be determined at manuf.) |
Benjamin Abbott et al. |
Fabrication
Sensing and Control
|
15 Aug 2012 |
| D1000237-v8 |
CUSTOM CABLE V25AB-36 |
Rich Abbott et al. |
Fabrication
Sensing and Control
|
14 Aug 2012 |
| D1102440-v2 |
Support Bracket, Short-Side Suspension Arm |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
09 Aug 2012 |
| D1102441-v2 |
Support Bracket, Long-Side Suspension Arm |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
09 Aug 2012 |
| T070304-v1 |
Vibration Transmission to OMC Bench via Cabling |
Norna Robertson |
Modelling
Suspensions
|
08 Aug 2012 |
| D1102380-v2 |
aLIGO TCS CO2P SM2 ASSY SHORT SUPPORT |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
06 Aug 2012 |
| D1001222-v3 |
Lower Structure Assembly Tooling - Top Plate Large |
Kurt Buckland |
Suspensions
System Engineering
|
02 Aug 2012 |
| D961115-v4 |
BSC Floor Assembly & Details, Beam Splitter Chamber (BSC), LIGO Vacuum Equipment |
Dennis Coyne |
Fabrication
Vacuum
Final Design
Document Migration
|
31 Jul 2012 |
| D1000223-v8 |
CUSTOM CABLE SPECIFICATION V25B-TBD |
Rich Abbott et al. |
Fabrication
Sensing and Control
|
26 Jul 2012 |
| D1003312-v8 |
aLIGO TCS Ring Heater End-to-End Wiring Diagram |
Stephen O'Connor |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
24 Jul 2012 |
| D1000568-v9 |
CUSTOM CABLE V25J-143 |
Rich Abbott et al. |
Fabrication
Sensing and Control
|
24 Jul 2012 |
| D1000921-v8 |
CUSTOM CABLE V25C-143 |
Rich Abbott et al. |
Fabrication
Sensing and Control
|
23 Jul 2012 |
| E1200545-v3 |
TwinCAT Library for Error Handling |
Daniel Sigg |
State Control and Monitoring
|
23 Jul 2012 |
| E1200629-v1 |
TwinCAT Library for Photodetector DC Monitors |
Alexa N Staley |
State Control and Monitoring
|
20 Jul 2012 |
| D1201025-v1 |
Strain Relief Clip for DC Power Supply Shelves |
David Kinzel |
Observatory Facilities
Installation
|
18 Jul 2012 |
| D1102413-v1 |
Elevation Support Plate, CO2 Laser Projection Steering Mirror 2, H1-L1 |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
25 Jun 2012 |
| D030078-v2 |
Add-on Mass, 20g |
Michael Meyer |
Suspensions
Final Design
|
21 Jun 2012 |
| D020351-v2 |
Add-on Mass, 50g |
Michael Meyer |
Suspensions
Final Design
|
21 Jun 2012 |
| D020350-v3 |
Add-on Mass, 100g |
Michael Meyer |
Suspensions
Final Design
|
21 Jun 2012 |
| D1000224-v5 |
CUSTOM CABLE V25D - v5 |
Rich Abbott et al. |
Fabrication
Sensing and Control
|
20 Jun 2012 |
| D1200878-v1 |
aLIGO Pcal Laser Shutter Hex Post |
Jonathan Berliner |
Assembly
Auxiliary Optics
Modelling
Fabrication
Laser Systems
Calibration
|
12 Jun 2012 |
| D0902025-v3 |
Upper AOSEM Mounting Bracket, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
04 Jun 2012 |
| D0901493-v3 |
Lower AOSEM Mounting Bracket, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
04 Jun 2012 |
| D1102176-v1 |
Azimuth Support Plate, CO2 Laser Projection Steering Mirror 2, H1-L1 |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
04 Jun 2012 |
| G1200555-v2 |
LAE and Enclosures Access Discussion |
David Kinzel et al. |
Safety
Observatory Facilities
Laser Systems
Installation
|
01 Jun 2012 |
| D1200450-v4 |
Photon Calibrator Transmitter Breadboard Mounting Adapters |
Jonathan Berliner et al. |
Fabrication
Laser Systems
Installation
Calibration
|
31 May 2012 |
| D070442-v7 |
Structural Weldment, HLTS |
Derek Bridges et al. |
Suspensions
Final Design
|
29 May 2012 |
| E1200494-x0 |
aLIGO, PSL, Test Reports |
Benno Willke et al. |
Laser Systems
|
16 May 2012 |
| T0900607-v5 |
AdvLigo CDS Realtime Sequencer Software |
Rolf Bork |
Data Acquisition System
|
14 May 2012 |
| E1200362-x0 |
aLIGO, Slow Controls, Controllers, Picomotor Table Feedthrough |
Daniel Sigg |
State Control and Monitoring
|
09 May 2012 |
| D1101849-v1 |
aLIGO TCS HWS OPTICS ASSY In Vac, L1 HAM5 |
Aidan Brooks et al. |
Integration
Auxiliary Optics
Fabrication
System Engineering
Preliminary Design
Vacuum
Final Design
|
04 May 2012 |
| D060426-v3 |
Advanced LIGO, SUS, Quad N-Ptype UI MASS, UI MASS WIRE CLAMP BODY |
Joe ODell |
Suspensions
|
03 May 2012 |
| F1200003-v1 |
Template for TwinCAT Library Documentation |
Daniel Sigg |
State Control and Monitoring
|
27 Apr 2012 |
| D070056-v2 |
Advanced LIGO, SUS, Quad N-PType, Quad Dog Clamp |
Joe ODell |
Suspensions
Final Design
|
25 Apr 2012 |
| T1000090-v5 |
advanced LIGO baffle design using SIS |
Hiro Yamamoto |
Core Optics
Modelling
|
25 Apr 2012 |
| D0900607-v2 |
Voltage Controlled Oscillator: Rear panel |
Daniel Sigg |
Sensing and Control
|
20 Apr 2012 |
| D0900606-v2 |
Voltage Controlled Oscillator: Front panel |
Daniel Sigg |
Sensing and Control
|
20 Apr 2012 |
| D080703-v2 |
RF Source Front Panel |
Daniel Sigg |
Sensing and Control
|
20 Apr 2012 |
| D1000125-v2 |
RF Distribution Amplifier Front Panel |
Daniel Sigg |
Sensing and Control
|
20 Apr 2012 |
| C940056-v1 |
Geotechnical Investigation of the LIGO Site, Livingston, Louisiana |
Dennis Coyne |
System Engineering
|
19 Apr 2012 |
| D1001520-v5 |
Cable Assy, Lower Quad Terminal Block to Upper Quad Terminal Block |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
19 Apr 2012 |
| T1200172-v2 |
Installation and testing of L1 PSL table legs |
Riccardo DeSalvo et al. |
Commissioning
Laser Systems
|
15 Apr 2012 |
| E1200222-x0 |
aLIGO, Slow Controls, Legacy |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1100605-v1 |
Addresses of EtherCAT Safety Terminals |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| G1100098-v1 |
EtherCAT (Beckhoff) for advanced LIGO |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| G1200005-v1 |
EtherCAT for advanced LIGO |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200142-x0 |
aLIGO, Slow Controls, EtherCAT Communication Tester |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200306-x0 |
aLIGO, Slow Controls, Test Modules |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200352-x0 |
aLIGO, Slow Controls, Concentrators, RF Amplifiers |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200353-x0 |
aLIGO, Slow Controls, Concentrators, Demodulators |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200355-x0 |
aLIGO, Slow Controls, Concentrators, Legacy Photodetectors |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200356-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 1 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200357-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 2 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200363-x0 |
aLIGO, Slow Controls, Controllers, Picomotor Four Axes Breakout |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200378-x0 |
aLIGO, Slow Controls, Chassis, Empty |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200223-x0 |
aLIGO, Slow Controls, Overview |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200305-x0 |
aLIGO, Slow Controls, EtherCAT Hardware |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200370-x0 |
aLIGO, Slow Controls, Chassis, End Remote Access H1 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200368-x0 |
aLIGO, Slow Controls, Chassis, Corner Remote Access H1 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200371-x0 |
aLIGO, Slow Controls, Chassis, ISC Common Mode |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200372-x0 |
aLIGO, Slow Controls, Chassis, Corner 2 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200373-x0 |
aLIGO, Slow Controls, Chassis, Corner 3 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200376-x0 |
aLIGO, Slow Controls, Chassis, End 2 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| T080266-v1 |
Suspending optics on steel wire loops |
Norna Robertson et al. |
Basic R&D
Suspensions
|
02 Mar 2009 |
| D1000238-v5 |
CUSTOM CABLE V25AC-36 v5 |
Rich Abbott et al. |
Fabrication
Sensing and Control
|
09 Apr 2012 |
| D080761-v4 |
Lower Blade, HSTS |
Bobby Moore et al. |
Suspensions
Final Design
|
08 Apr 2012 |
| D070321-v2 |
Earthquake Stop Bridge Crossbar, HLTS |
Derek Bridges |
Suspensions
Final Design
|
02 Apr 2012 |
| D1102175-v1 |
Fine Adjust Pivot Rod, CO2 Laser Projection Steering Mirror 2, H1-L1 |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
01 Apr 2012 |
| E0900006-v1 |
Review of HAM-ISI "Watchdog" safety software |
Sam Waldman et al. |
Seismic Isolation
Safety
Data Acquisition System
Suspensions
System Engineering
Data and Computing
|
01 Apr 2012 |
| E080462-v1 |
Infrasonic Microphone and PEM++ |
Gabor Szeifert et al. |
Requirements
System Test
Data quality / vetoes
Other data analysis
Integration
Basic R&D
Data Acquisition System
Conceptual Design
Fabrication
Observatory Facilities
Sensing and Control
Preliminary Design
Upgrades
Data and Computing
Calibration
Computing/archiving
|
01 Apr 2012 |
| E030647-v1 |
Advanced LIGO Detector System Interface Control Document (ICD) |
Dennis Coyne |
Seismic Isolation
Core Optics
Auxiliary Optics
Data Acquisition System
Suspensions
Input Optics
Observatory Facilities
System Engineering
Sensing and Control
Vacuum
Laser Systems
Final Design
Data and Computing
|
01 Apr 2012 |
| D1101437-v1 |
aLIGO TCS SM1 H1-L1 Strong Back |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
28 Mar 2012 |
| D1101438-v1 |
H1-L1 SM1 Standard Angle Section, SS 316, 1.25" x 1.25" x .25" |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
28 Mar 2012 |
| D1101287-v1 |
H1-L1 SM1 Standard T Section, SS 304, 1.5" x 1.5" x 3/16" |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
28 Mar 2012 |
| D0901419-v2 |
Lower Loop Wire Jig Assembly (HLTS) |
Derek Bridges |
Suspensions
Final Design
|
27 Mar 2012 |
| D1101295-v1 |
H1-L1 Steering Mirror 1 Support |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
25 Mar 2012 |
| D0900689-v2 |
Base Plate, Library of Clamps, Lower Blade, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
24 Mar 2012 |
| D0900680-v2 |
Blade Clamp (3.5 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
22 Mar 2012 |
| D0900679-v2 |
Blade Clamp (3.0 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
22 Mar 2012 |
| D0900678-v2 |
Blade Clamp (2.5 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
22 Mar 2012 |
| D0900677-v2 |
Blade Clamp (2.0 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
22 Mar 2012 |
| D0900676-v2 |
Blade Clamp (1.5 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
22 Mar 2012 |
| D0900675-v2 |
Blade Clamp (1.0 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
22 Mar 2012 |
| D0900674-v2 |
Blade Clamp (0.5 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
22 Mar 2012 |
| D0900673-v3 |
Blade Clamp (3.5 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900672-v3 |
Blade Clamp (3.0 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900671-v3 |
Blade Clamp (2.5 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900670-v3 |
Blade Clamp (2.0 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900669-v3 |
Blade Clamp (1.5 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900668-v3 |
Blade Clamp (1.0 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900667-v3 |
Blade Clamp (0.5 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900665-v3 |
Library of Clamps, Upper Blade, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D080267-v2 |
Top Bridge, Upper Blade Bake Fixture, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D080268-v2 |
Base Plate, Upper Blade Bake Fixture, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D080265-v3 |
Upper Blade Bake Fixture, HLTS |
Derek Bridges et al. |
Suspensions
Final Design
|
22 Mar 2012 |
| D1200448-v1 |
Septum Viewport Protector |
Michael Meyer |
Conceptual Design
Vacuum
|
21 Mar 2012 |
| D970210-v2 |
ASC Monument Locations-Washington Site |
Hugh Radkins et al. |
Observatory Facilities
System Engineering
Installation
|
21 Mar 2012 |
| D0901241-v2 |
Earthquake Stop Mount, Bridge, HLTS |
Derek Bridges |
Suspensions
Final Design
|
19 Mar 2012 |
| D070310-v2 |
Top Blade Guard Bar, HLTS |
Derek Bridges |
Suspensions
Final Design
|
19 Mar 2012 |
| D070309-v2 |
Top Blade Guard Riser, HLTS |
Derek Bridges |
Suspensions
Final Design
|
19 Mar 2012 |
| D1101718-v2 |
aLIGO Septum Viewport Blank |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
19 Mar 2012 |
| D1101535-v3 |
aLIGO Septum Viewport Assy, non-wedged |
Dennis Coyne |
Vacuum
|
19 Mar 2012 |
| D1101117-v3 |
aLIGO, Septum Viewport Flange |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
19 Mar 2012 |
| D1101002-v3 |
aLIGO, high quality, 6" Viewport Clamp |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
19 Mar 2012 |
| D1101000-v3 |
aLIGO, high quality, .75 deg wedged, 6" Viewport Assembly |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
19 Mar 2012 |
| D0901286-v2 |
Secondary Metal Prism Breakoff, HLTS |
Michael Meyer et al. |
Suspensions
Final Design
|
18 Mar 2012 |
| D070338-v4 |
Metal Bottom Mass, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
17 Mar 2012 |
| D080238-v2 |
Collar, Lower, 900g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080236-v2 |
Collar, Lower, 700g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080234-v2 |
Collar, Lower, 500g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080232-v2 |
Collar, Lower, 300g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080183-v2 |
Collar, Lower, 100g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080229-v2 |
Collar, Upper, 900g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080227-v2 |
Collar, Upper, 700g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080225-v2 |
Collar, Upper, 500g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080223-v2 |
Collar, Upper, 300g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080182-v2 |
Collar, Upper, 100g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D030155-v2 |
Center Offset, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D970075-v2 |
Dumbbell Standoff |
Calum Torrie |
Suspensions
Final Design
|
17 Mar 2012 |
| D070336-v3 |
Main Section, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
17 Mar 2012 |
| D070585-v4 |
Upper Clamp, Intermediate Wire, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D070394-v3 |
Upper Clamp, Intermediate Wire, Outside, HLTS |
Michael Meyer |
Suspensions
Final Design
|
17 Mar 2012 |
| D030149-v2 |
Intermediate Wire Breakoff, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D070405-v3 |
Lower Clamp, Intermediate Wire, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D070406-v3 |
Lower Clamp, Intermediate Wire, Outside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080263-v2 |
Additional Mass Disk, 150g |
Derek Bridges |
Suspensions
Preliminary Design
|
17 Mar 2012 |
| D070333-v2 |
Additional Mass Disk, 100g |
Derek Bridges |
Suspensions
Preliminary Design
|
17 Mar 2012 |
| D0901405-v2 |
Additional Mass Disk, 50g |
Derek Bridges |
Suspensions
Preliminary Design
|
17 Mar 2012 |
| D030139-v2 |
Roll Offset, T-Piece, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D020615-v4 |
Lower Blade, HLTS |
Michael Meyer et al. |
Suspensions
Final Design
|
16 Mar 2012 |
| D020652-v2 |
C-Clamp, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
16 Mar 2012 |
| D070341-v3 |
Upper Clamp, Upper Wire, Outside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
16 Mar 2012 |
| D020617-v2 |
Upper Blade, HLTS |
Calum Torrie et al. |
Suspensions
Final Design
|
16 Mar 2012 |
| D070331-v3 |
Shim, 1.0mm, Upper Blade, HLTS |
Derek Bridges |
Suspensions
Final Design
|
16 Mar 2012 |
| T0900043-v11 |
Optical Layout and Parameters for the Advanced LIGO Cavities |
Muzammil Arain |
Core Optics
Input Optics
System Engineering
Sensing and Control
|
16 Mar 2012 |
| D070460-v2 |
Earthquake Stop Mount, Long, HLTS |
Derek Bridges |
Suspensions
Final Design
|
14 Mar 2012 |
| D070322-v2 |
Earthquake Stop Bracket, Long, HLTS |
Derek Bridges |
Suspensions
Final Design
|
14 Mar 2012 |
| D070319-v2 |
Earthquake Stop Assembly, Bridge, HLTS |
Derek Bridges |
Suspensions
Final Design
|
14 Mar 2012 |
| D0901553-v4 |
Lower AOSEM Alignment Assembly, Bottom Mass, HLTS |
Bobby Moore et al. |
Suspensions
Final Design
|
14 Mar 2012 |
| D0901552-v4 |
Upper AOSEM Alignment Assembly, Bottom Mass, HLTS |
Bobby Moore et al. |
Suspensions
Final Design
|
14 Mar 2012 |
| D080677-v4 |
Coil Holder Assembly, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
13 Mar 2012 |
| D070335-v6 |
Upper Mass Assembly, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
12 Mar 2012 |
| D070334-v4 |
Intermediate Mass Assembly, HLTS |
Derek Bridges |
Suspensions
Final Design
|
12 Mar 2012 |
| D070328-v2 |
Rotating Plate, Rotational Adjuster, HLTS |
Derek Bridges |
Suspensions
Final Design
|
12 Mar 2012 |
| D070326-v4 |
Rotational Adjuster, HLTS |
Derek Bridges |
Suspensions
Final Design
|
12 Mar 2012 |
| D070374-v2 |
Mounting Pad Body, HLTS |
Derek Bridges |
Suspensions
Final Design
|
12 Mar 2012 |
| D1200443-x0 |
Short Support Strut, aLIGO TCS H2 UHV Steering Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Final Design
Installation
|
12 Mar 2012 |
| D1200439-x0 |
Long Support Strut, aLIGO TCS H2 UHV Steering Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Final Design
Installation
|
12 Mar 2012 |
| D1200419-x0 |
Damper Nut Plate |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Installation
|
08 Mar 2012 |
| D1200401-x0 |
Long Side Stiffener, aLIGO TCS Steering Mirror Assembly for H2, BSC's 7 & 8 |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Installation
|
06 Mar 2012 |
| D1200398-x0 |
Short Side Stiffener, aLIGO TCS Steering Mirror Assembly for H2, BSC's 7 & 8 |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Installation
|
06 Mar 2012 |
| D080727-v3 |
Earthquake Stop Assembly, Long Bracket, HLTS |
Derek Bridges |
Suspensions
Final Design
|
29 Feb 2012 |
| D080726-v3 |
Earthquake Stop Assembly, Long Mount, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
29 Feb 2012 |
| D1100453-v2 |
aLIGO TCS 1/10 Lamda Flat 4'' Dia. Mirror, CO2 Laser Projection |
Austin Langley et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
28 Feb 2012 |
| D070327-v2 |
Base Plate, Rotational Adjuster, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
23 Feb 2012 |
| D1100449-x0 |
aLigo TCS Mirror Mount, CO2 Laser Projection |
Austin Langley et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
23 Feb 2012 |
| D070332-v6 |
HLTS Suspension Assembly |
Derek Bridges |
Suspensions
Preliminary Design
|
21 Feb 2012 |
| T0900325-v2 |
H1 Squeezer Noise Model |
Daniel Sigg et al. |
Basic R&D
Sensing and Control
|
16 Feb 2012 |
| T0900020-v3 |
Checks on initial batch of production Quad blades |
Justin Greenhalgh |
Suspensions
|
12 Feb 2012 |
| T1200079-x0 |
LLO Beam Tube Enclosure Inspection Report |
Michael Meyer |
Operations
Vacuum
|
10 Feb 2012 |
| D060311-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, FRONT AND REAR PLATE, NOISE TABLECLOTH |
Joe ODell |
Auxiliary Optics
Suspensions
|
09 Feb 2012 |
| D0901461-v2 |
HLTS Magnet Placement Fixture, Intermediate Mass |
Derek Bridges |
Suspensions
Final Design
|
09 Feb 2012 |
| D080702-v2 |
RF Source Assembly |
Daniel Sigg |
Sensing and Control
|
02 Feb 2012 |
| D1100285-v3 |
aLIGO TCS Fixture Retainer, H2 UHV Steering Mirror Assembly |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
01 Feb 2012 |
| E0900247-v3 |
Coated Substrate, ALIGO Power Recycling Mirror 2 |
Rodica Martin |
Core Optics
Input Optics
Final Design
|
30 Jan 2012 |
| E0900245-v3 |
Coated Substrate, ALIGO Power Recycling Mirror |
Rodica Martin |
Core Optics
Input Optics
Final Design
|
30 Jan 2012 |
| E0900248-v4 |
Coated Substrate, ALIGO Signal Recycling Mirror 2 |
Rodica Martin |
Core Optics
Input Optics
Final Design
|
30 Jan 2012 |
| D1001727-v3 |
aLIGO TCS CO2 Laser In-Vacuum Steering Mirror |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
24 Jan 2012 |
| D1200122-v1 |
Handle for Cleaning the H2 UHV 12" Steering Mirror |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Cleaning
|
24 Jan 2012 |
| D070008-v3 |
ADVANCED LIGO, SUS, QUAD LOWER STRUCTURE, SPACING PLUG |
Joe ODell et al. |
Fabrication
System Engineering
Final Design
|
23 Jan 2012 |
| C1200346-v2 |
SOW LIGO Hanford H1 Electronics Air Conditioning |
John Worden |
Procurements
Observatory Facilities
|
17 Jan 2012 |
| D1200028-v1 |
LIGO H1 Electronics HVAC Plan |
John Worden |
Procurements
Observatory Facilities
|
17 Jan 2012 |
| D1200029-v1 |
LIGO H1 Electronics HVAC Plan and Equipment Schedules |
John Worden |
Procurements
Observatory Facilities
|
17 Jan 2012 |
| T1100062-v6 |
aLIGO I&Q Demodulator Test Procedure |
Rich Abbott et al. |
Sensing and Control
Subsystem Test
|
09 Jan 2012 |
| D1003209-v2 |
aLIGO TCS Clamping Flange, CO2 Laser Projection Viewport Enclosure |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
09 Jan 2012 |
| D1102455-x0 |
Box Section Support Tube, TCS CO2P SM2, H1/L1 |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
06 Jan 2012 |
| D0901079-v2 |
HLTS Upper Wire Lower Clamp Assembly |
Derek Bridges |
Suspensions
Preliminary Design
|
23 Dec 2011 |
| D1102431-x0 |
aLIGO TCS CO2P SM2 ASSY LONG SUPPORT |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
22 Dec 2011 |
| D1003222-v2 |
aLIGO TCS Periscope Flange, CO2 Laser Projection VP Enclosure |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
21 Dec 2011 |
| D1003214-v2 |
aLIGO TCS Top Wall, CO2 Laser Projection VP Enclosure |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
20 Dec 2011 |
| D1003206-v3 |
aLIGO TCS Viewports Enclosure Front Wall, CO2 Laser Projection |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
19 Dec 2011 |
| D0902523-v2 |
OVERSIZE LOCATING SLEEVE, ETM, COC CONTAINER |
Kurt Buckland |
System Engineering
|
19 Dec 2011 |
| D1002386-v3 |
Mechanical Plan - H1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
16 Dec 2011 |
| D1003213-v2 |
aLIGO TCS Side Optomech Wall, CO2 Laser Projection VP Enclosure |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
15 Dec 2011 |
| D1101547-v1 |
H2 Viewport Camera Mirror Fixture |
Alexander Lynch |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
13 Dec 2011 |
| D1100250-v1 |
aLIGO TCS Rear Mounting Plate, CO2 Laser Projection Viewport Cover |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
29 Nov 2011 |
| D070125-v3 |
LHO CDS Lans and Gateways |
David Barker |
Observatory Facilities
Installation
|
29 Nov 2011 |
| D020682-v2 |
HSTS/OMC Lower Blade Clamp, Shim, 1mm |
Bobby Moore |
Suspensions
Final Design
|
22 Nov 2011 |
| D070052-v2 |
OMC Connector Bracket |
Janeen Romie |
Suspensions
|
21 Nov 2011 |
| D1101509-v2 |
Pico Motor Driver Chassis |
Gerardo Moreno et al. |
Data and Computing
|
09 Nov 2011 |
| D1100053-x0 |
aLIGO TCS HWS Viewport Enclosure Assembly, Y-arm |
Cheryl Vorvick et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
01 Nov 2011 |
| D1001755-v2 |
aLIGO TCS RH, Lower Custom 25D Connector Bracket |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
25 Oct 2011 |
| C1106855-v1 |
LHO Landscaping Photos - Tumbleweeds |
John Worden |
Observatory Facilities
Operations Business
|
25 Oct 2011 |
| C1106854-v1 |
LHO Landscaping Photos |
John Worden |
Observatory Facilities
Operations Business
|
25 Oct 2011 |
| T1000105-v5 |
Cleaning Procedures for Viton and PFA encapsulated Viton O-rings |
Margot Hennig |
Core Optics
|
20 Oct 2011 |
| D1001223-v3 |
Lower Structure Assembly Tooling - Top Plate Small |
Kurt Buckland |
Suspensions
System Engineering
|
18 Oct 2011 |
| D0902580-v2 |
Squeezer Controls Chassis C |
Daniel Sigg |
Data Acquisition System
|
13 Oct 2011 |
| D1000233-v3 |
CUSTOM CABLE V25W |
Emery Brown |
Fabrication
Sensing and Control
|
12 Oct 2011 |
| D0902087-v3 |
Positioning Standoff, Magnet Placement Fixture, Bottom Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
11 Oct 2011 |
| T1100309-v5 |
LSC Instrument Science White Paper |
Rana Adhikari et al. |
Seismic Isolation
Core Optics
Basic R&D
Suspensions
Sensing and Control
Laser Systems
|
10 Oct 2011 |
| D0900681-v2 |
Library of Clamps, Lower Blade, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0902452-v2 |
Standoff Side Plate, Short, Magnet Placement Fixture, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Oct 2011 |
| D0902445-v2 |
Standoff Plate, Magnet Placement Fixture, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Oct 2011 |
| D0901551-v4 |
Lower AOSEM Alignment Assembly, Intermediate Mass, HLTS |
Bobby Moore et al. |
Suspensions
Final Design
|
08 Oct 2011 |
| D0902024-v4 |
Upper AOSEM Alignment Assembly, Intermediate Mass, HLTS |
Bobby Moore et al. |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0901436-v2 |
Wire Clamp Mount, Lower Loop Wire Jig, HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Oct 2011 |
| D0901435-v3 |
Wire Start Clamp, Inside, Lower Loop Wire Jig, HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Oct 2011 |
| D0901135-v2 |
Mounting Block, Lower Clamp, Upper Wire, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D070449-v2 |
Coil Holder (Tablecloth), HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Oct 2011 |
| D0900688-v2 |
Blade Clamp (3.5 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900687-v2 |
Blade Clamp (3.0 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900686-v2 |
Blade Clamp (2.5 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900685-v2 |
Blade Clamp (2.0 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900684-v2 |
Blade Clamp (1.5 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900683-v2 |
Blade Clamp (1.0 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900682-v2 |
Blade Clamp (0.5 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900696-v2 |
Blade Clamp (3.5 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900695-v2 |
Blade Clamp (3.0 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900694-v2 |
Blade Clamp (2.5 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900693-v2 |
Blade Clamp (2.0 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900692-v2 |
Blade Clamp (1.5 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900691-v2 |
Blade Clamp (1.0 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900690-v2 |
Blade Clamp (0.5 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D070320-v2 |
Mounting Bracket, Coil Holder, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| G1101141-v1 |
NEW CONTROL AND DATA ACQUISITION SYSTEM IN THE ADVANCED LIGOPROJECT |
Rolf Bork et al. |
Data Acquisition System
|
05 Oct 2011 |
| P1100052-v3 |
New Control and Data Acquisition System in the Advanced LIGO Project |
Rolf Bork et al. |
Data Acquisition System
|
05 Oct 2011 |
| D1101256-v2 |
aLigo TCS 2'' Dia. Enhanced Aluminum Mirror, CO2 Laser Projection, Camera |
Alexander Lynch |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
05 Oct 2011 |
| E1100983-x0 |
DCN, Custom Parts, aLIGO TCS VIEWPORT ENCLOSURE ASSEMBLY, H2 CO2 LASER PROJECTION |
Mindy Jacobson |
Operations
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
04 Oct 2011 |
| E1100656-v1 |
Formal Drawing Tree & BOM, aLIGO TCS VIEWPORT ENCLOSURE ASSEMBLY, H2 CO2 LASER PROJECTION |
Alexander Lynch et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
04 Oct 2011 |
| E1100655-v1 |
DCN, aLIGO TCS VIEWPORT ENCLOSURE ASSEMBLY, H2 CO2 LASER PROJECTION |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
04 Oct 2011 |
| D1100263-v3 |
aLIGO TCS Fixture, H2 UHV Steering Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
29 Sep 2011 |
| D1101272-v2 |
aLIGO TCS H2 UHV Mirror Splash Cover |
Mindy Jacobson |
Auxiliary Optics
Fabrication
System Engineering
Vacuum
Cleaning
|
29 Sep 2011 |
| D1101866-v1 |
Shim, .125" Thick |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Installation
|
29 Sep 2011 |
| D1100267-v5 |
aLIGO TCS Fixture Short Support Gusset, H2 UHV Steering Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
28 Sep 2011 |
| D1100266-v5 |
aLIGO TCS Fixture Tall Support Gusset, H2 UHV Steering Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
28 Sep 2011 |
| E1100901-v1 |
DCN, aLIGO Ring Heater segment assemblies, production lot #2 |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
|
23 Sep 2011 |
| D1101831-v1 |
EtherCAT 4km H1 Remote Access End |
Daniel Sigg |
Data Acquisition System
|
21 Sep 2011 |
| D1101829-v1 |
EtherCAT Panel End/Safety Network |
Daniel Sigg |
Data Acquisition System
|
21 Sep 2011 |
| D1101832-v1 |
Corner MSR Controls Chassis Name Plate |
Daniel Sigg |
Data Acquisition System
|
21 Sep 2011 |
| D1101833-v1 |
End Link Controls Chassis Name Plate |
Daniel Sigg |
Data Acquisition System
|
21 Sep 2011 |
| D1101828-v1 |
EtherCAT Panel Corner/Safety Network |
Daniel Sigg |
Data Acquisition System
|
21 Sep 2011 |
| D1101827-v1 |
EtherCAT Panel Corner/Safety Extensions |
Daniel Sigg |
Data Acquisition System
|
21 Sep 2011 |
| D0900999-v3 |
Screw, Socket Head Cap, 1/4-20 UNC-3A X 2 Long, Fully Threaded, Rounded End |
Derek Bridges |
System Engineering
Final Design
|
19 Sep 2011 |
| D1101800-x0 |
HWS Opto Mechanical Layout, ITMy, HAM10 |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
System Engineering
Preliminary Design
Vacuum
Final Design
Subsystem Test
|
12 Sep 2011 |
| D1101799-x0 |
HWS Opto Mechanical Layout, ITMx, HAM10 |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
System Engineering
Preliminary Design
Vacuum
Final Design
Subsystem Test
|
12 Sep 2011 |
| D1101798-x0 |
aLIGO TCS HWS Optics Assy, HAM10 |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
System Engineering
Preliminary Design
Vacuum
Final Design
Subsystem Test
|
12 Sep 2011 |
| T1100346-v2 |
Design of the Elastomeric Sealed, High Quality, Viewports |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
10 Sep 2011 |
| D080124-v3 |
Prism Breakoff, Lower Wire, Bottom Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D070438-v4 |
Clamp, Lower Loop Wire, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D030148-v2 |
Lower Wire Breakoff, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D030156-v2 |
Side Offset, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D080181-v2 |
Intermediate Mass Changer Assembly, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D020624-v3 |
Lower Clamp, Upper Wire, Outside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D020610-v3 |
Lower Clamp, Upper Wire, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D020611-v4 |
Upper Clamp, Upper Wire, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D070329-v2 |
Pull Plate, Rotational Adjuster, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D070330-v2 |
Push Plate, Rotational Adjuster, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| E1100771-v1 |
DCN, Post-Machined Vent Holes, aLIGO TCS H2 In-Vac Mirror |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Cleaning
|
02 Sep 2011 |
| E1100817-x0 |
DCN: Initial Release of Septum Viewport Blank (aLIGO) |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
29 Aug 2011 |
| D0900628-v2 |
Side Bracket, Mounting Pad, HLTS |
Derek Bridges |
Suspensions
Final Design
|
26 Aug 2011 |
| D0900626-v2 |
Mounting Pad Assembly, HLTS |
Derek Bridges |
Suspensions
Final Design
|
26 Aug 2011 |
| D070537-v2 |
Structure, HLTS |
Derek Bridges |
Suspensions
Final Design
|
26 Aug 2011 |
| D1101255-v2 |
aLIGO TCS Ring Heater Replacement TM Crutch Support |
Mindy Jacobson |
Auxiliary Optics
Fabrication
System Engineering
Vacuum
Final Design
|
25 Aug 2011 |
| D1003204-v3 |
aLIGO TCS Viewports Enclosure Front Cover Assembly, CO2 Laser Projection |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
23 Aug 2011 |
| D1003193-v3 |
aLIGO TCS Viewport Enclosure Assembly, H2 CO2 Laser Projection |
Cheryl Vorvick et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
22 Aug 2011 |
| D1003210-v2 |
aLIGO TCS Viewports Enclosure Side Optomech Assembly, CO2 Laser Projection |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
22 Aug 2011 |
| D1101235-v2 |
aLIGO TCS H2 Viewport Camera Mirror Assembly |
Alexander Lynch |
Basic R&D
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
22 Aug 2011 |
| T1100448-x0 |
Input Optics Power Control |
Rich Abbott et al. |
Input Optics
Final Design
|
22 Aug 2011 |
| D1003221-v3 |
aLIGO TCS Viewport Enclosure Lower Wall Assembly, CO2 Laser Projection |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
22 Aug 2011 |
| D1003220-v2 |
aLIGO TCS Bottom Wall, CO2 Laser Projection VP Enclosure |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
22 Aug 2011 |
| D0900627-v2 |
Front Bracket, Mounting Pad, HLTS |
Derek Bridges |
Suspensions
Final Design
|
19 Aug 2011 |
| D1101145-v1 |
TOP PERISCOPE MOUNT ASSEMBLY, H2 CO2P |
Alexander Lynch |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
18 Aug 2011 |
| C1105429-v3 |
SOW: Pilot Test, Vacuum Component Bakeout and Residual Gas Assay |
Richard Bagley et al. |
Procurements
Integration
Fabrication
Vacuum
Cleaning
|
17 Aug 2011 |
| E1100762-v1 |
D1100884 Slow Controls Communication Tester Wiring |
Rodney Dodd |
Data Acquisition System
Final Design
|
16 Aug 2011 |
| T1000422-v1 |
aLIGO IO Expansion Chassis Assembly Procedure |
Jay Heefner et al. |
Data Acquisition System
Fabrication
|
16 Aug 2011 |
| D1100419-v3 |
EtherCAT Adapters for Picomotor |
Daniel Sigg |
Sensing and Control
|
04 Aug 2011 |
| E1100733-v1 |
6 inch Vacuum Viewport Window, uncoated |
Lisa Austin |
Auxiliary Optics
Vacuum
|
02 Aug 2011 |
| D1101548-v1 |
Uncoated high quality, non-wedged, 6" Viewport, Optic |
Lisa Austin |
Auxiliary Optics
Vacuum
|
02 Aug 2011 |
| M990034-v2 |
OBSOLETE |
Richard Savage et al. |
Operations
Observatory Facilities
Policies
|
01 Aug 2011 |
| D090433-v2 |
aLIGO SUS, QUAD TRANSPORT PAD L BAR |
Joe ODell |
Suspensions
Final Design
|
27 Jul 2011 |
| D1003215-v1 |
aLIGO TCS Viewports Enclosure Side Cover Assembly, CO2 Laser Projection |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
27 Jul 2011 |
| D1003217-v1 |
aLIGO TCS Viewports Enclosure Back Cover Assembly, CO2 Laser Projection |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
27 Jul 2011 |
| D1100494-v2 |
aLigo TCS .25'' Thick Optical Window Clam Shell Assy |
Alexander Lynch et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
26 Jul 2011 |
| D1100493-v1 |
aLigo TCS .25'' Thick ZnSe Window Clam Shell Assy |
Alexander Lynch et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
26 Jul 2011 |
| D1100540-v1 |
aLIGO TCS .5'' Thick Optical Window |
Alexander Lynch et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
26 Jul 2011 |
| D1003208-v1 |
aLIGO TCS Mounting Plate, CO2 Laser Projection Viewport Cover |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
26 Jul 2011 |
| D080631-v3 |
O-Ring, 3in Viewports |
Douglas Cook et al. |
Fabrication
Risk Management
Vacuum
|
26 Jul 2011 |
| D1100413-v1 |
aLIGO TCS Viewports Enclosure Stress Relief Bar for Thermocouple, CO2 Laser Projection |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
26 Jul 2011 |
| D1003216-v1 |
aLIGO TCS Side Cover Wall, CO2 Laser Projection VP Enclosure |
Phil Willems et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
26 Jul 2011 |
| D1003218-v1 |
aLIGO TCS Back Cover Wall, CO2 Laser Projection VP Enclosure |
Ayodele Cole et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
25 Jul 2011 |
| D070548-v3 |
ADVANCED LIGO, SUS, ETM/ITM LOWER STRUCTURE, UIM MASS STOP, BOTH CHAINS |
Joe ODell |
Suspensions
|
21 Jul 2011 |
| E1100659-v1 |
DCN, aLIGO TCS Ring Heater Replacement Fixture |
Mindy Jacobson |
Auxiliary Optics
Fabrication
System Engineering
Vacuum
Upgrades
Installation
|
20 Jul 2011 |
| D1003219-v1 |
aLIGO TCS CO2 Laser Projection Viewport Enclosure Mounting Rod, Side-to-Back Covers |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
18 Jul 2011 |
| E1100624-v1 |
Specification: Pulse-Purge Vacuum Baking for Polymers |
Dennis Coyne |
Vacuum
|
15 Jul 2011 |
| D1101268-v1 |
aLIGO TCS Ring Heater Replacement TM Crutch Stiffener |
Mindy Jacobson |
Auxiliary Optics
Fabrication
System Engineering
Vacuum
Final Design
|
12 Jul 2011 |
| D1101254-v1 |
aLIGO TCS Ring Heater Replacement TM Crutch |
Mindy Jacobson |
Auxiliary Optics
Fabrication
System Engineering
Vacuum
Final Design
|
12 Jul 2011 |
| E1100660-v1 |
BOM, aLIGO TCS Ring Heater Replacement Fixture Assembly |
Mindy Jacobson |
Auxiliary Optics
System Engineering
Vacuum
Final Design
Upgrades
Installation
|
12 Jul 2011 |
| D1101005-v1 |
aLIGO, high quality, .75 deg wedged, 6" Viewport, Optic |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
11 Jul 2011 |
| D080180-v1 |
AdL SUS LASTI Noise Prototype Controls Wiring |
Jay Heefner |
Suspensions
Installation
|
11 Jul 2011 |
| D060294-v1 |
LASTI AdL SUS Triple Controls Wiring |
Jay Heefner |
Suspensions
Installation
|
11 Jul 2011 |
| D1101265-v1 |
12" Aluminum Flange Cover |
Michael Meyer |
Vacuum
|
06 Jul 2011 |
| D1100514-v1 |
10" Aluminum Flange Cover |
Michael Meyer |
Vacuum
Final Design
|
05 Jul 2011 |
| E1100612-v1 |
H2 PSL Bill of Materials |
Jose Puente |
Laser Systems
Installation
|
05 Jul 2011 |
| E070273-v1 |
Process Traveler - HAM cable cleaning |
Stephany Foley et al. |
Seismic Isolation
Vacuum
|
23 Jun 2011 |
| T1100340-v1 |
Realtime Code Generator (RCG) post build script |
Joseph Betzwieser et al. |
Data Acquisition System
|
23 Jun 2011 |
| C1104716-v2 |
Statement of Work: H2 PSL Laser Diode and Chiller Rooms |
Richard Savage |
Procurements
Fabrication
Laser Systems
|
22 Jun 2011 |
| D060383-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, MIDDLE WIRE CLAMP BODY |
Joe ODell |
Suspensions
|
21 Jun 2011 |
| D060384-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, MIDDLE WIRE CLAMP |
Joe ODell |
Suspensions
|
21 Jun 2011 |
| D060328-v3 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, 3/8-16 UNC T NUT Based on Wixroyd 2418.W120 |
Joe ODell et al. |
Suspensions
Final Design
|
21 Jun 2011 |
| D1002926-v2 |
Module-E, BSC Cartridge installation, aLIGO |
Sam Barnum et al. |
Observatory Facilities
Installation
|
15 Jun 2011 |
| T1100323-v1 |
aLIGO Modification of SpectraCom IRIG-B Breakout Adapter |
Edmond Merilh |
Data Acquisition System
Fabrication
|
15 Jun 2011 |
| D1101098-v1 |
H2 Laser Diode Room and Chiller Room Architectural Drawings |
Richard Savage et al. |
Laser Systems
Final Design
|
13 Jun 2011 |
| D070575-v3 |
Base Plate, Structural Weldment, HLTS |
Derek Bridges |
Suspensions
Final Design
|
11 Jun 2011 |
| E1100521-x0 |
DCN: Initial Release of aLIGO High Quality Viewport Windows (wedged and non-wedged) |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
09 Jun 2011 |
| D1101091-v1 |
OBSOLETE |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
09 Jun 2011 |
| D1001720-v2 |
QPD Enclosure v2 |
Rich Abbott et al. |
Data Acquisition System
Fabrication
|
03 Jun 2011 |
| C1104440-v2 |
Statement or Work for H2 Electronics Building HVAC |
John Worden |
Procurements
Observatory Facilities
|
02 Jun 2011 |
| D1100884-v1 |
EtherCAT Communication Tester |
Daniel Sigg |
Data Acquisition System
|
28 May 2011 |
| D1100890-v1 |
EtherCAT Communication Tester Front Panel |
Daniel Sigg |
Data Acquisition System
|
28 May 2011 |
| S1103474-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103473-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103472-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103471-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103470-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103469-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103468-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103467-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103466-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103465-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| D080503-v3 |
ADVANCED LIGO, SUS, THIS, BEAM SPLITTER UPPER STRUCTURE, SHEAR PLATE |
Joe ODell et al. |
Suspensions
|
24 May 2011 |
| T1000505-v2 |
Test Procedure for RF Frequency Divider |
Daniel Sigg |
Sensing and Control
|
24 May 2011 |
| E1100461-v1 |
Test Procedure for RF Frequency Divide-by-8 |
Daniel Sigg et al. |
Sensing and Control
|
24 May 2011 |
| E1100460-v1 |
RF Frequency Divide-by-Eight |
Daniel Sigg |
Sensing and Control
|
23 May 2011 |
| T1100276-v1 |
Modeling an Optical Spring |
Tobin Fricke |
Sensing and Control
Laser Systems
|
17 May 2011 |
| T0900239-v1 |
AOS: Optical Lever and Viewport Conceptual Design |
Robert Schofield et al. |
Auxiliary Optics
|
19 May 2009 |
| D1100893-v1 |
EtherCAT Communication Tester Side Panel |
Daniel Sigg |
Data Acquisition System
|
13 May 2011 |
| D1100892-v1 |
EtherCAT Communication Tester Top/Bottom Panel |
Daniel Sigg |
Data Acquisition System
|
13 May 2011 |
| D1100891-v1 |
EtherCAT Communication Tester Rear Panel |
Daniel Sigg |
Data Acquisition System
|
13 May 2011 |
| D1100793-v2 |
EtherCAT Panel Temperature |
Daniel Sigg |
Data Acquisition System
|
10 May 2011 |
| E1100425-v1 |
Test Procedure for Slow Controls Concentrator Serial Ports |
Daniel Sigg |
Data Acquisition System
|
09 May 2011 |
| D1100874-v1 |
Serial Adapter Cable (Testing) |
Daniel Sigg |
Data Acquisition System
|
09 May 2011 |
| D1100872-v1 |
Serial Loopback Cable (Testing) |
Daniel Sigg |
Data Acquisition System
|
09 May 2011 |
| D1100868-v1 |
Picomotor Driver PS Assembly Spacer |
Daniel Sigg |
Sensing and Control
|
09 May 2011 |
| E020247-v1 |
Document Change Notice for D980400 |
Hugh Radkins et al. |
Laser Systems
Document Migration
|
08 May 2011 |
| M060056-v2 |
Advanced LIGO Reference Design |
David Shoemaker |
Detector
Conceptual Design
Reports
|
08 May 2011 |
| E0900124-x0 |
AFWFS parts for HAM6 Traveler |
Sam Waldman |
Vacuum
Installation
|
07 May 2011 |
| G1100452-v5 |
PSL Tech Status |
Benno Willke |
Meeting
Reviews
Laser Systems
|
05 May 2011 |
| D1100638-v1 |
Slow controls concentrator EtherCAT: serial ports |
Daniel Sigg |
Data Acquisition System
|
05 May 2011 |
| G1100469-v3 |
FMP Technical - NSF review April2011 |
John Worden |
Observatory Facilities
|
05 May 2011 |
| G1100458-v3 |
DAQ Technical Status - NSF Review April 25-27, 2011 |
Rolf Bork |
Meeting
Data Acquisition System
|
05 May 2011 |
| G1100462-v2 |
ISC Technical Status - NSF 2011 |
Peter Fritschel |
Reviews
Sensing and Control
|
05 May 2011 |
| G1100445-v3 |
Plenary 5 Integration Planning - NSF 2011 |
Valery Frolov et al. |
Sensing and Control
|
05 May 2011 |
| E1000678-v2 |
Optical Lever Heights above the Floor |
Dennis Coyne |
Auxiliary Optics
System Engineering
Final Design
Installation
|
04 May 2011 |
| D1002346-v1 |
Electrical Connector Nut Plate |
Ayodele Cole |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
04 May 2011 |
| T1100246-v1 |
iLIGO L1, H1 and H2 Interferometer Resonances |
Dennis Coyne |
Seismic Isolation
Core Optics
Auxiliary Optics
Commissioning
Suspensions
Input Optics
System Engineering
|
04 May 2011 |
| G1100491-v4 |
IO Input Optics Technical Status |
David Reitze et al. |
Input Optics
Reviews
|
30 Apr 2011 |
| E1100385-v2 |
Cable Lengths, End Station, H1 & H2 |
Dennis Coyne |
Observatory Facilities
System Engineering
|
21 Apr 2011 |
| D1100634-v1 |
Slow controls concentrator front panel: serial ports |
Daniel Sigg |
Data Acquisition System
|
21 Apr 2011 |
| D1100695-v1 |
Slow controls concentrator top/bottom panels: demodulator |
Daniel Sigg |
Sensing and Control
|
20 Apr 2011 |
| D1100755-v1 |
Slow controls concentrator rear panel: ASC demodulator |
Daniel Sigg |
Sensing and Control
|
20 Apr 2011 |
| D1100754-v1 |
Slow controls concentrator front panel: ASC demodulator |
Daniel Sigg |
Sensing and Control
|
20 Apr 2011 |
| D1100694-v1 |
Slow controls concentrator rear panel: LSC demodulator |
Daniel Sigg |
Sensing and Control
|
20 Apr 2011 |
| D1100693-v1 |
Slow controls concentrator front panel: LSC demodulator |
Daniel Sigg |
Sensing and Control
|
20 Apr 2011 |
| G1100174-v1 |
DC Readout in Enhanced LIGO |
Tobin Fricke |
Sensing and Control
|
19 Apr 2011 |
| D0902062-v2 |
Vertical Locating Block, Magnet Placement Fixture, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
18 Apr 2011 |
| D1100710-x0 |
aLIGO TCS H2 Top Periscope Mount Support |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
18 Apr 2011 |
| D1100709-x0 |
aLIGO TCS H2 Top Periscope Support Fixture |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
18 Apr 2011 |
| D1100708-x0 |
aLIGO TCS H2 CO2P Top Periscope Mount Assembly |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
18 Apr 2011 |
| D1100325-v1 |
Picomotor Driver Rear Panel |
Daniel Sigg |
Sensing and Control
|
17 Apr 2011 |
| D1100324-v1 |
Picomotor Driver Front Panel |
Daniel Sigg |
Sensing and Control
|
17 Apr 2011 |
| D1100636-v1 |
Slow controls concentrator top/bottom panels: serial ports |
Daniel Sigg |
Data Acquisition System
|
16 Apr 2011 |
| D1100635-v1 |
Slow controls concentrator rear panel: serial ports |
Daniel Sigg |
Data Acquisition System
|
16 Apr 2011 |
| D1100633-v1 |
Slow controls concentrator interface: serial ports |
Daniel Sigg |
Data Acquisition System
|
16 Apr 2011 |
| D0902068-v2 |
Standoff Ring, Magnet Placement Fixture, Bottom Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
16 Apr 2011 |
| D030320-v4 |
HEPI SPRING ASSEMBLY, aLIGO BSC |
Andy Stein |
Seismic Isolation
Final Design
|
15 Apr 2011 |
| D1100666-v1 |
Corner MSR Controls Chassis Name Plate |
Daniel Sigg |
Data Acquisition System
|
12 Apr 2011 |
| D1100667-v1 |
End Link Controls Chassis Name Plate |
Daniel Sigg |
Data Acquisition System
|
12 Apr 2011 |
| D1100665-v1 |
EtherCAT Panel Corner/Extensions |
Daniel Sigg |
Data Acquisition System
|
12 Apr 2011 |
| E1100333-v1 |
Test Procedure for Slow Controls Concentrator RF Amplifiers |
Daniel Sigg |
Sensing and Control
|
12 Apr 2011 |
| D1100630-v1 |
EtherCAT Panel Fiber/PTP |
Daniel Sigg |
Data Acquisition System
|
12 Apr 2011 |
| D1100661-v1 |
EtherCAT Panel Serial Concentrator |
Daniel Sigg |
Data Acquisition System
|
12 Apr 2011 |
| D1100662-v1 |
EtherCAT Panel Safety Contacts |
Daniel Sigg |
Data Acquisition System
|
12 Apr 2011 |
| E1000382-v8 |
Material Qualification Queue |
Dennis Coyne |
System Engineering
Vacuum
|
11 Apr 2011 |
| T080021-v3 |
UK UIM Driver Pre-Production Prototype Test Plan |
Jay Heefner |
System Test
Suspensions
|
11 Apr 2011 |
| D060314-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, LEFT HAND PLATE, NOISE TABLECLOTH |
Joe ODell |
Suspensions
|
08 Apr 2011 |
| D060312-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, RIGHT HAND PLATE, NOISE TABLECLOTH |
Joe ODell |
Suspensions
|
08 Apr 2011 |
| D1002961-v2 |
ISC CM Controls Chassis |
Daniel Sigg |
Sensing and Control
|
07 Apr 2011 |
| E1000670-v2 |
ISC CM Controls Chassis Wiring Diagram |
Daniel Sigg |
Sensing and Control
|
07 Apr 2011 |
| D0902554-v3 |
EtherCAT Chassis Rear Panel |
Daniel Sigg |
Data Acquisition System
|
07 Apr 2011 |
| D1100259-v1 |
Slow controls concentrator interface: RF amplifiers |
Daniel Sigg |
Sensing and Control
|
06 Apr 2011 |
| D1100599-v1 |
Slow controls concentrator side panels: RF amplifiers |
Daniel Sigg |
Sensing and Control
|
05 Apr 2011 |
| D1100598-v1 |
Slow controls concentrator top/bottom panels: RF amplifiers |
Daniel Sigg |
Sensing and Control
|
05 Apr 2011 |
| D1100261-v1 |
Slow controls concentrator rear panel: RF amplifiers |
Daniel Sigg |
Sensing and Control
|
05 Apr 2011 |
| E1100023-v1 |
Material Qualification RGA Test Results: EG&G YAG-444A Photodiode |
Dennis Coyne |
Sensing and Control
Vacuum
|
04 Apr 2011 |
| T1100195-v1 |
Acromag Binary IO Chassis Pin Map |
Rich Abbott |
Sensing and Control
Final Design
|
31 Mar 2011 |
| D1100477-v1 |
aLIGO TCS Viewports Spherical Bearing Periscope Assembly, CO2 Laser Projection |
Austin Langley |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
30 Mar 2011 |
| D080378-v2 |
Clamp Sleeve, HAM Support Tube |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080377-v3 |
Clamp Washer Plate, HAM Support Tube |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080376-v3 |
Clamp Preload, HAM Support Tube |
Michael Hillard |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080375-v2 |
Clamp Cap, HAM Support Tube |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080374-v2 |
Clamp Base, HAM Support Tube |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080459-v2 |
HAM Crossbeam Connector HEPI Plate |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080458-v2 |
HAM Crossbeam Connector Tube |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080460-v2 |
HAM Crossbeam Connector Mount Plate |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080461-v2 |
HAM Crossbeam Connector Gusset |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080453-v2 |
HAM Straight Crossbeam Tube |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080454-v2 |
HAM Crossbeam Clamp Plate |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080455-v2 |
HAM Crossbeam Mounting Flange |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| E970130-v4 |
Material, Process, Handling and Shipping Specification for Fluorel Parts |
Dennis Coyne |
Fabrication
System Engineering
Vacuum
|
29 Mar 2011 |
| D020002-v4 |
Spring Mounting Plate, Pre-Isolator |
Andy Stein et al. |
Seismic Isolation
Final Design
|
29 Mar 2011 |
| D020408-v3 |
Double Start Counterwound Spring Asm |
Andy Stein |
Seismic Isolation
Final Design
|
29 Mar 2011 |
| D020195-v3 |
HEPI CROSSBEAM FOOT |
Andy Stein et al. |
Seismic Isolation
Final Design
|
29 Mar 2011 |
| D080699-v2 |
Crossbeam Washer Plate #2 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
28 Mar 2011 |
| D080698-v2 |
Crossbeam Washer Plate #1 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
28 Mar 2011 |
| D080700-v2 |
Crossbeam Washer Disc |
Andy Stein et al. |
Seismic Isolation
Final Design
|
28 Mar 2011 |
| D080465-v2 |
HAM Crossbeam HEPI Adapter |
Andy Stein et al. |
Seismic Isolation
Final Design
|
28 Mar 2011 |
| D1002312-v3 |
aLIGO TCS UHV AZ Fine Adjust Pivot Plate, BSC7 |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
|
28 Mar 2011 |
| D1002455-v3 |
aLIGO TCS UHV AZ Fine Adjust Pivot Plate, BSC8 |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
28 Mar 2011 |
| D060359-v3 |
Advanced LIGO, SUS, Quad N-Ptype, Additional Mass |
Joe ODell |
Suspensions
|
28 Mar 2011 |
| D1002399-v3 |
Room Layout / Framing Plan - H2 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
22 Mar 2011 |
| D1002411-v3 |
Framing Plans and Elevations - H2 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
22 Mar 2011 |
| D1002397-v3 |
Mechanical Plan and Schedules - H2 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
22 Mar 2011 |
| D1002396-v3 |
Mechanical Plan - H2 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
22 Mar 2011 |
| D1002398-v3 |
Mechanical Sections and Details - H2 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
22 Mar 2011 |
| E0900410-v4 |
Vacuum Component List |
John Worden et al. |
Vacuum
|
21 Mar 2011 |
| D1100483-v1 |
4 Channel Differential to Single Ended Converter Front Panel Files |
Rich Abbott |
Sensing and Control
Final Design
|
18 Mar 2011 |
| D1100496-x0 |
aLIGO TCS Viewport Thermocouple |
Austin Langley |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
16 Mar 2011 |
| D1100484-v1 |
4 Channel Differential to Single Ended Converter Rear Panel Files |
Rich Abbott |
Sensing and Control
Final Design
|
16 Mar 2011 |
| D080496-v2 |
HAM HEPI CAGING ASSEMBLY |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 Mar 2011 |
| D080495-v2 |
HAM HEPI CAGING SIDE CAP |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 Mar 2011 |
| D080548-v2 |
HAM HEPI Horz Actuator Adapter 2 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
10 Mar 2011 |
| D080547-v2 |
HAM HEPI Horz Actuator Adapter 1 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
10 Mar 2011 |
| D1100452-x0 |
aLigo TCS Mirror Mount Base Support, CO2 Laser Projection |
Austin Langley et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
10 Mar 2011 |
| D1100451-x0 |
aLigo TCS Mirror Mount Horizontal Support, CO2 Laser Projection |
Austin Langley et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
10 Mar 2011 |
| D0901492-v3 |
AOSEM Alignment Bracket, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
10 Mar 2011 |
| D0901549-v3 |
AOSEM Alignment Bracket, Bottom Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
10 Mar 2011 |
| D1100444-x0 |
aLigo TCS Rear rubber shim, CO2 Laser Projection |
Austin Langley |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
09 Mar 2011 |
| D1100293-v1 |
aLIGO TCS Template, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
07 Mar 2011 |
| D1002327-v3 |
aLIGO TCS UHV Short Support, BSC7 & BSC8 |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
07 Mar 2011 |
| D1002315-v3 |
aLIGO TCS UHV Bracket, Short Side, BSC7 |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
|
07 Mar 2011 |
| D1002287-v3 |
aLIGO TCS UHV Bracket, Long Side, BSC7 |
Mindy Jacobson et al. |
Auxiliary Optics
System Engineering
Preliminary Design
Vacuum
|
07 Mar 2011 |
| D1002334-v2 |
aLIGO TCS UHV Coarse Adjust Pivot Rod, BSC7 & BSC8 |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
07 Mar 2011 |
| D1002333-v3 |
aLIGO TCS UHV Back Brace, BSC7 & BSC8 |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
07 Mar 2011 |
| D1002317-v3 |
aLIGO TCS UHV Long Support, BSC7 & BSC8 |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
07 Mar 2011 |
| D1002311-v2 |
aLIGO TCS UHV EL Fine Adjust Pivot Plate, BSC7 & BSC8 |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
|
07 Mar 2011 |
| D1002453-v2 |
aLIGO TCS UHV Bracket, Short Side, BSC8 |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
07 Mar 2011 |
| D1002454-v2 |
aLIGO TCS UHV Bracket, Long Side, BSC8 |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
07 Mar 2011 |
| D1002313-v2 |
aLIGO TCS UHV Fine Adjust Pivot Rod, BSC7 & BSC8 |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
|
07 Mar 2011 |
| S0900326-v2 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
04 Mar 2011 |
| D1100416-x0 |
aLIGO TCS Spherical Bearing Ball, CO2 Laser Projection VP Enclosure |
Austin Langley |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
04 Mar 2011 |
| D080080-v4 |
ADVANCED LIGO, SUS, THIS, BS TOP STAGE, BEAM SPLITTER |
Joe ODell |
Suspensions
|
02 Mar 2011 |
| D1002475-v2 |
DC Power Pigtail Cord |
David Kinzel |
System Engineering
|
01 Mar 2011 |
| D1003366-v2 |
Common Mode Test Rig Rear Panel |
Daniel Sigg |
Sensing and Control
|
28 Feb 2011 |
| E1100144-v1 |
Electropolished Aluminum -- outgassing test |
Dennis Coyne et al. |
System Engineering
Vacuum
|
27 Feb 2011 |
| D0902064-v2 |
Base Plate, Optic Base Assembly, Magnet Placement Fixture |
Derek Bridges |
Suspensions
Final Design
|
25 Feb 2011 |
| D0902066-v2 |
Optic Rest Block, Optic Base Assembly, Magnet Placement Fixture |
Derek Bridges |
Suspensions
Final Design
|
25 Feb 2011 |
| D020380-v2 |
Wire Start Clamp, Outside |
Derek Bridges |
Suspensions
Preliminary Design
|
23 Feb 2011 |
| D1100330-x0 |
aLIGO TCS Viewports Enclosure Mirror support plate, CO2 Laser Projection |
Austin Langley |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
22 Feb 2011 |
| D0900644-v8 |
Advanced LIGO ISC Component Locations |
Rich Abbott |
Conceptual Design
System Engineering
|
18 Feb 2011 |
| D1100265-v2 |
aLIGO TCS Fixture Base Plate, H2 UHV Steering Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
18 Feb 2011 |
| D1100295-v2 |
aLIGO TCS Fixture Template Brace, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
18 Feb 2011 |
| D1100300-v2 |
aLIGO TCS Interface Template, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
18 Feb 2011 |
| D1100297-v2 |
aLIGO TCS Long Base Template, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
18 Feb 2011 |
| D1100296-v2 |
aLIGO TCS Short Base Template, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
18 Feb 2011 |
| M1000229-v1 |
LLO 35W PSL SOP |
David Kinzel et al. |
Safety
Laser Systems
|
18 Feb 2011 |
| M1000230-v1 |
LLO 35W TCS SOP |
David Kinzel et al. |
Safety
Laser Systems
|
18 Feb 2011 |
| D1001742-v3 |
aLIGO TCS CO2 Laser In-Vacuum Steering Optics Assembly, H2, BSC7 |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
17 Feb 2011 |
| D1100294-v1 |
aLIGO TCS Fixture Template, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
16 Feb 2011 |
| G0900594-v1 |
Controlling radiation pressure instabilities in Enhanced LIGO |
Katherine Dooley et al. |
Meeting
Sensing and Control
|
02 Jul 2009 |
| D1100298-v1 |
aLIGO TCS Template Brace, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
16 Feb 2011 |
| D1001721-v1 |
1U RACK CHASSIS with vents with interface |
Emery Brown |
Data Acquisition System
Fabrication
|
16 Feb 2011 |
| T0900486-v5 |
IO Stray Light Analysis and Baffle Design |
Guido Mueller et al. |
Input Optics
Final Design
|
15 Feb 2011 |
| D1100299-x0 |
aLIGO TCS Periscope Tube, CO2 Laser Projection VP Enclosure |
Austin Langley |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
15 Feb 2011 |
| T1100087-v1 |
SR785 Machine Settings File |
Rich Abbott |
Sensing and Control
Subsystem Test
|
10 Feb 2011 |
| T1100078-v2 |
ISC Whitening Chassis Misc. Parts BOM |
Rich Abbott |
Assembly
Sensing and Control
|
08 Feb 2011 |
| D0900603-v2 |
Wire Start Clamp, Inside, Upper Wire Jig, HLTS |
Derek Bridges |
Suspensions
Final Design
|
07 Feb 2011 |
| D0900634-v2 |
Wire Start Clamp, Inside, Intermediate Wire Jig, HLTS |
Derek Bridges et al. |
Suspensions
Final Design
|
07 Feb 2011 |
| D0900632-v2 |
Wire Clamp Mount, Intermediate Wire Jig, HLTS |
Derek Bridges et al. |
Suspensions
Final Design
|
07 Feb 2011 |
| D980184-v2 |
LOS Clamp, Long |
Derek Bridges |
System Engineering
Final Design
|
07 Feb 2011 |
| D1100228-x0 |
Voltage Translator Whitening |
Daniel Sigg |
Sensing and Control
|
07 Feb 2011 |
| D1002034-v1 |
CDS Internal Chassis Power Cable C |
Rich Abbott |
Assembly
Sensing and Control
|
04 Feb 2011 |
| T1000466-v3 |
4 Channel LSC Quad IQ Demodulator Module Misc. Parts |
Rich Abbott |
Assembly
Sensing and Control
|
04 Feb 2011 |
| G1100116-v1 |
40m LSC model design |
Koji Arai |
Basic R&D
Sensing and Control
|
04 Feb 2011 |
| D020406-v2 |
Double Start Counterwound Spring |
Andy Stein |
Seismic Isolation
Final Design
|
04 Feb 2011 |
| D1002395-v4 |
Framing Plans and Elevations - L1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
03 Feb 2011 |
| D1002394-v5 |
Room Layout / Framing Plan - L1 Laser Area Enclosure Acoustic Shell |
Richard Savage |
Procurements
Laser Systems
Final Design
|
03 Feb 2011 |
| D1002393-v4 |
Mechanical Sections and Details - L1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
03 Feb 2011 |
| D1003328-v1 |
aLIGO TCS UHV H2 Assembly Interface Damper |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
Final Design
|
03 Feb 2011 |
| D1001850-v2 |
aLIGO TCS Ring Heater, Lower Copper Plate |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
03 Feb 2011 |
| D020407-v4 |
Double Start Counterwound Spring Connector |
Andy Stein |
Seismic Isolation
Final Design
|
03 Feb 2011 |
| D0901433-v2 |
Base Plate, Lower Loop Wire Jig, HLTS |
Derek Bridges |
Suspensions
Final Design
|
01 Feb 2011 |
| D1100108-v1 |
Blank panel adapter |
Daniel Sigg |
Sensing and Control
|
31 Jan 2011 |
| D1100095-v2 |
Fiber coupler panel adapter |
Daniel Sigg |
Sensing and Control
|
31 Jan 2011 |
| D0900631-v2 |
Blade Clamp Mount, Intermediate Wire Jig, HLTS |
Michael Meyer |
Suspensions
Final Design
|
31 Jan 2011 |
| D0900595-v2 |
Base Plate, Upper Wire Jig, HLTS |
Derek Bridges |
Suspensions
Final Design
|
30 Jan 2011 |
| D0900597-v2 |
Wire Clamp Mount, Upper Wire Jig, HLTS |
Derek Bridges et al. |
Suspensions
Final Design
|
21 Jan 2011 |
| D0900596-v2 |
Blade Clamp Mount, Upper Wire Jig, HLTS |
Derek Bridges et al. |
Suspensions
Final Design
|
21 Jan 2011 |
| T080184-v2 |
A Color Coding System for Mechanical Models |
Derek Bridges |
Modelling
Conceptual Design
System Engineering
Preliminary Design
Final Design
|
18 Jan 2011 |
| D1002392-v3 |
Mechanical Plan and Schedules - L1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
18 Jan 2011 |
| D1001709-v1 |
I/O EXPANSION CHASSIS SPOTWELD PANEL B |
Emery Brown |
Data Acquisition System
Fabrication
|
18 Jan 2011 |
| D1001712-v2 |
I/O EXPANSION CHASSIS - FRONT PANEL |
Emery Brown |
Data Acquisition System
Fabrication
|
14 Jan 2011 |
| E080426-v1 |
Advanced LIGO ERGO Arm Hazard Analysis |
Gregg Harry et al. |
Core Optics
Installation
|
06 Mar 2009 |
| D071008-v2 |
Stage 0 Stiffener End Cap |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| T1100043-v1 |
YAG-444-4AH QPD RF Measurement Data |
Rich Abbott |
Basic R&D
Sensing and Control
|
14 Jan 2011 |
| E0900341-v3 |
Test Plan for the Input Mode Cleaner |
Guido Mueller et al. |
Input Optics
Final Design
|
14 Jan 2011 |
| D071180-v2 |
GS-13 Adapter Plate |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071071-v2 |
Rib, Tan, Flexure Mid |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071070-v2 |
Rib, Tan, Flexure Cen |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071069-v2 |
Rib, Rad, Flexure Out 2 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071068-v2 |
Rib, Rad, Flexure Out 1 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071065-v2 |
Keel Base |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071056-v2 |
Rib, Rad, GS-13 Out 2 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071055-v2 |
Rib, Rad, GS-13 Out 1 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071054-v2 |
Rib, Rad, GS-13 Mid |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071053-v2 |
Rib, Tan, GS-13 Cen |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071052-v2 |
Rib, Tan, GS-13 Mid |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071006-v2 |
Stage 0 Stiffener Rib |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D0902552-v3 |
EtherCAT Chassis Assembly |
Daniel Sigg |
Data Acquisition System
|
13 Jan 2011 |
| D0902575-v2 |
EtherCAT Adapter Double DB-15M |
Daniel Sigg |
Data Acquisition System
|
13 Jan 2011 |
| C1002165-v2 |
SOW for PS-129b Laser Area Enclosure Acoustic Shell (LLO) |
Derek Anderson et al. |
Procurements
Laser Systems
|
13 Jan 2011 |
| C1002124-v4 |
SOW for PS-132 Laser Area Enclosure Cleanrooms |
Derek Anderson et al. |
Procurements
Laser Systems
|
13 Jan 2011 |
| E1000760-v2 |
Cable Lengths, Corner Station, H1 & H2 |
Dennis Coyne |
Observatory Facilities
System Engineering
|
12 Jan 2011 |
| D080705-v3 |
RF Source Oscillator Board |
Daniel Sigg |
Sensing and Control
|
11 Jan 2011 |
| D080749-v2 |
Advanced LIGO, SUS, THIS, Screwed Rod Top Stage Tooling |
Joe ODell |
Suspensions
|
07 Jan 2011 |
| D080748-v2 |
Advanced LIGO, SUS, THIS, Bush Top Stage Tooling |
Joe ODell et al. |
Suspensions
|
07 Jan 2011 |
| D1003343-v1 |
H1, L1 PRC Septum Plate Port Location |
Dennis Coyne |
System Engineering
Vacuum
|
07 Jan 2011 |
| D1003344-v1 |
H2 PRC Septum Plate Port Location |
Dennis Coyne |
System Engineering
Vacuum
|
07 Jan 2011 |
| D1003364-v1 |
Common Mode Test Rig |
Daniel Sigg |
Sensing and Control
|
03 Jan 2011 |
| L1000320-v3 |
Linear motor specifications |
Sam Waldman |
Sensing and Control
|
29 Dec 2010 |
| D1003365-v1 |
Common Mode Test Rig Front Panel |
Daniel Sigg |
Sensing and Control
|
26 Dec 2010 |
| C1002822-v1 |
SOW for FM-150b H2 Electronics Building |
Alan Wilkins |
Procurements
Observatory Facilities
|
22 Dec 2010 |
| D0901784-v1 |
Common Mode Servo Interface Board |
Daniel Sigg |
Sensing and Control
|
19 Dec 2010 |
| D0901782-v2 |
Common Mode Servo Front Panel |
Daniel Sigg |
Sensing and Control
|
17 Dec 2010 |
| T080083-v4 |
Testing procedure for the Timing Master/FanOut board Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
15 Dec 2010 |
| G080405-v1 |
Introduction to DC Readout |
Tobin Fricke |
Commissioning
Sensing and Control
|
14 Dec 2010 |
| T1000175-v2 |
Thinner Compensation Plates for reduced Squeeze film damping |
Matthew Evans et al. |
Core Optics
Suspensions
System Engineering
Sensing and Control
Change Control
Vacuum
Technical Review Board
|
14 Dec 2010 |
| D071200-v4 |
Trim Adjustment Mass |
Andy Stein et al. |
Seismic Isolation
Final Design
|
13 Dec 2010 |
| D0902553-v2 |
EtherCAT Chassis Front Panel |
Daniel Sigg |
Data Acquisition System
|
08 Dec 2010 |
| D1002813-v1 |
Aluminum Viewport Cover |
Michael Meyer |
Vacuum
|
08 Dec 2010 |
| E1000700-v4 |
DCN, aLIGO TCS Ring Heater Parent UHV Cable Assembly |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
07 Dec 2010 |
| D1002962-v1 |
ISC CM Controls Chassis Name Plate |
Daniel Sigg |
Sensing and Control
|
07 Dec 2010 |
| D1002120-v5 |
aLIGO, SUS, LOWER STRUCTURE STORAGE CONTAINER FRONT PANEL |
Kurt Buckland |
Suspensions
System Engineering
|
07 Dec 2010 |
| D1002119-v5 |
aLIGO, SUS, LOWER STRUCTURE STORAGE CONTAINER WELDMENT |
Kurt Buckland |
Suspensions
System Engineering
|
07 Dec 2010 |
| D1002118-v4 |
aLIGO, SUS, LOWER STRUCTURE STORAGE CONTAINER |
Kurt Buckland |
Suspensions
System Engineering
|
07 Dec 2010 |
| D1003195-x0 |
aLIGO TCS External Clamping Flange Assembly, CO2 Laser Projection |
Cheryl Vorvick et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
03 Dec 2010 |
| D1002975-x0 |
aLIGO_MC_Tube_Baffle_Plate_ Upper_MCB3 |
Tim Nguyen |
Basic R&D
Vacuum
|
03 Dec 2010 |
| D1001849-v2 |
aLIGO TCS Ring Heater, Upper Copper Plate |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
30 Nov 2010 |
| D1002345-v2 |
Electrical Connector Bushing |
Ayodele Cole |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
29 Nov 2010 |
| D060189-v3 |
ERM ESD PATTERN |
Kurt Buckland et al. |
System Engineering
|
14 Oct 2009 |
| D1002952-v2 |
aLIGO TCS RH Winding Guide |
Cheryl Vorvick et al. |
Auxiliary Optics
Vacuum
Final Design
|
15 Nov 2010 |
| D1002420-v1 |
aLIGO TCS RH Custom Bracket Adapter |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
15 Nov 2010 |
| D1001756-v2 |
aLIGO TCS RH, Upper Custom 25D Connector Bracket |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
15 Nov 2010 |
| D1002537-v2 |
Parts and Quantities for D1002424 Vibration Absorber Assembly |
Kurt Buckland |
Seismic Isolation
System Engineering
|
15 Nov 2010 |
| D1002594-v2 |
aLIGO, SUS, UPPER QUAD VIBRATION ABSORBER MOUNTING PLATE |
Kurt Buckland |
Suspensions
System Engineering
|
15 Nov 2010 |
| D1002986-v1 |
aLIGO TCS RH Element Spacer |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
12 Nov 2010 |
| C1002079-v1 |
Specification for De-Installation LA LIGO Site |
LSC |
Requirements
Observatory Facilities
|
11 Nov 2010 |
| C1001836-v1 |
Specification for De-Installation - Washington site. |
John Worden et al. |
Procurements
Observatory Facilities
Installation
|
11 Nov 2010 |
| D1002687-v1 |
Aluminum Cover for 60" Vacuum Flanges |
Michael Meyer |
Vacuum
Final Design
|
10 Nov 2010 |
| C1002164-v2 |
SOW for PS-129a Laser Area Enclosure Acoustic Shell (LHO) |
Derek Anderson et al. |
Procurements
Laser Systems
|
09 Nov 2010 |
| D0901550-v2 |
Upper AOSEM Mounting Bracket, Bottom Mass, HLTS |
Bobby Moore et al. |
Suspensions
Final Design
|
08 Nov 2010 |
| D1002388-v3 |
Mechanical Sections and Details - H1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
05 Nov 2010 |
| D1002781-v2 |
Ante-room Plan, H2 Laser Area Enclosure |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
05 Nov 2010 |
| D1002789-v2 |
Ante-room Elevations, L1 Laser Area Enclosure |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
05 Nov 2010 |
| D1002787-v2 |
Ante-room Plan, L1 Laser Area Enclosure |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
05 Nov 2010 |
| D1002786-v2 |
Ante-room Elevations, H2 Laser Area Enclosure |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
05 Nov 2010 |
| D1002391-v3 |
Mechanical Plan - L1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
05 Nov 2010 |
| D1002390-v2 |
Framing Plans and Elevations - H1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
05 Nov 2010 |
| D1002389-v2 |
Room Layout / Framing Plan - H1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
05 Nov 2010 |
| D1002387-v2 |
Mechanical Plan and Schedules - H1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
05 Nov 2010 |
| D1002633-v2 |
Ante-room Plan, H1 Laser Area Enclosure |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
05 Nov 2010 |
| D1002634-v1 |
Ante-room Elevations, H1 Laser Area Enclosure |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
05 Nov 2010 |
| D0900340-v2 |
Lower AOSEM Mounting Bracket, Bottom Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Nov 2010 |
| D0901006-v1 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.5 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
System Engineering
Final Design
|
04 Nov 2010 |
| T0900653-v2 |
MCA TUBE AND MCB TUBE VIEWPORTS |
Michael Smith |
Auxiliary Optics
System Engineering
Vacuum
Final Design
|
03 Nov 2010 |
| C1002229-v1 |
PSL Laser Area Enclosure Cleanrooms - Specifications, Requirements, and Design Considerations |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
03 Nov 2010 |
| T1000657-v1 |
DC Power Strip Test Results |
Rich Abbott |
System Engineering
Subsystem Test
|
02 Nov 2010 |
| E1000655-v1 |
Frequency Doubler/Divider Count |
Daniel Sigg |
Sensing and Control
|
01 Nov 2010 |
| T0900612-v2 |
AdvLigo CDS Design Overview |
Rolf Bork |
Data Acquisition System
|
27 Oct 2010 |
| D0900302-v3 |
Timing IRIG-B Front Panel |
Daniel Sigg |
Data Acquisition System
|
27 Oct 2010 |
| D1002247-v1 |
aLIGO, SUS, LOWER STRUCTURE STORAGE CONTAINER LSAT CLAMP |
Kurt Buckland |
Suspensions
System Engineering
|
26 Oct 2010 |
| D1002248-v2 |
aLIGO, SUS, LOWER STRUCTURE STORAGE CONTAINER SUPPORT RAILS |
Kurt Buckland |
Suspensions
System Engineering
|
22 Oct 2010 |
| S080003-x0 |
OMC Tip/Tilt Hardware Shutter Chassis |
Rich Abbott |
Sensing and Control
|
26 Nov 2008 |
| D1002738-v1 |
Harmonics Generator Power Supply Interface Board |
Daniel Sigg |
Sensing and Control
|
18 Oct 2010 |
| D1002735-v1 |
Harmonics Generator Power Supply |
Daniel Sigg |
Sensing and Control
|
18 Oct 2010 |
| D1002742-v1 |
Capacitor Piggyback Board |
Daniel Sigg |
Sensing and Control
|
16 Oct 2010 |
| M1000328-x0 |
LLO TCS LVEA Alignment SOP |
David Kinzel et al. |
Operations
Safety
Laser Systems
|
14 Oct 2010 |
| M1000331-x0 |
LLO 100W HPLF Laser Destructive Testing SOP |
Rupal Amin et al. |
Operations
Safety
Laser Systems
|
14 Oct 2010 |
| M1000330-x0 |
LLO 100W HPLF High Power Alignment SOP |
David Kinzel et al. |
Operations
Safety
Laser Systems
|
14 Oct 2010 |
| D1001858-v3 |
aLIGO TCS Ring Heater Element Retainer, Right |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
14 Oct 2010 |
| D1001819-v3 |
aLIGO TCS Ring Heater Element Retainer, Left |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
14 Oct 2010 |
| D1002597-v1 |
aLIGO, SUS, UPPER QUAD VIBRATION ABSORBER CLAMP |
Kurt Buckland |
Suspensions
System Engineering
|
14 Oct 2010 |
| D1002174-v1 |
aLIGO FM/BS VIBRATION ABSORBER MOUNTING PLATE |
Kurt Buckland |
Suspensions
System Engineering
|
14 Oct 2010 |
| D1002081-v1 |
aLIGO OMC VIBRATION ABSORBER MOUNTING PLATE |
Kurt Buckland |
Suspensions
System Engineering
|
14 Oct 2010 |
| E1000569-x0 |
Document Change Notice (DCN) - VE Flange Protectors and Covers |
Michael Meyer |
Vacuum
Final Design
|
12 Oct 2010 |
| D1002365-v2 |
Clear Cover for 60" Chamber Doors |
Michael Meyer |
Vacuum
Final Design
|
12 Oct 2010 |
| D1002615-v1 |
Flange Protector for 84" Door (HAM) |
Michael Meyer |
Vacuum
|
12 Oct 2010 |
| D1002614-v1 |
Flange Protector for 60" Door (BSC) |
Michael Meyer |
Vacuum
|
12 Oct 2010 |
| D0900537-v2 |
LHO As Built HAM6 optical layout |
Sam Waldman |
Sensing and Control
Installation
|
07 Oct 2010 |
| D1001722-v1 |
1U RACK CHASSIS WITH VENT HOLES |
Jay Heefner et al. |
Data Acquisition System
Fabrication
|
06 Oct 2010 |
| T1000581-v1 |
Optical Layout and Parameters for the POP/ALS Beams |
David Tanner et al. |
Core Optics
Auxiliary Optics
Input Optics
Sensing and Control
|
05 Oct 2010 |
| D070552-v2 |
Advanced LIGO, SUS, ITM/ETM Structure, ITM/ETM Sleeve |
Joe ODell et al. |
Suspensions
Final Design
|
05 Oct 2010 |
| D060334-v2 |
Advanced LIGO, SUS, Quad N-Ptype, WIRE CLAMP JAW, ALL MASSES |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D060333-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, WIRE CLAMP BODY, TOP STAGE |
Joe ODell |
Suspensions
|
30 Sep 2010 |
| D060331-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, JACKING SCREW/Earthquake Stop |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D060330-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, ROTATIONAL ADJUSTER BASE PLATE |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D0900303-v1 |
Timing IRIG-B Rear Panel |
Daniel Sigg |
Data Acquisition System
|
30 Sep 2010 |
| D090434-v2 |
ADV LIGO, SUS, THIS, FRONT TRANSPORT PAD, QUAD SUS |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D080245-v3 |
ADV LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, EARTHQUAKE STOP, PEN RE MASS BUMP STOPS |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D080244-v2 |
ADV LIGO, SUS, QUAD N-PTYPE TEST REACTION MASS, EARTHQUAKE STOP MOUNT PLATE |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D060448-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, PIN (ADJUSTABLE PAD ASSYS) |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| T080136-v2 |
AdvLigo CDS Realtime Software SysAdmin Guide |
Rolf Bork |
Data Acquisition System
|
29 Sep 2010 |
| D060325-v2 |
Advanced LIGO, SUS, TOP STAGE N-P TYPE, ROTATIONAL ADJUSTER, STATIC HALF |
Joe ODell |
Suspensions
Final Design
|
29 Sep 2010 |
| T1000564-v1 |
Allowable Bake Temperature for UHV Processing of Aluminum Alloys |
Dennis Coyne |
System Engineering
Vacuum
|
28 Sep 2010 |
| D080725-v2 |
Earthquake Stop for Metal or Glass, 2.5 Inch |
Derek Bridges |
Suspensions
Final Design
|
26 Sep 2010 |
| E1000479-v1 |
Optical Contamination Test Results MasterBond EP30-2 samples on glass slides |
Liyuan Zhang et al. |
Suspensions
System Engineering
Vacuum
|
26 Sep 2010 |
| D080724-v3 |
Mounting Cap, Earthquake Stop |
Derek Bridges |
Suspensions
Final Design
|
26 Sep 2010 |
| G1000931-v1 |
Thermal noise in dielectric mirror coatings: calculation and optimization |
Nikita Kondratiev et al. |
Core Optics
|
23 Sep 2010 |
| G1000925-v1 |
The Glasgow 10m Prototype |
John Nelson et al. |
Basic R&D
Sensing and Control
|
23 Sep 2010 |
| G1000912-v1 |
Advanced Virgo INJ: Faraday isolator, Electro-optical modulator, high power beam dump and Input mode-cleaner |
Eric Genin |
Meeting
Input Optics
|
23 Sep 2010 |
| D1002485-v2 |
Schematic for PMC servo card |
Tara Chalermsongsak |
Laser Systems
|
20 Sep 2010 |
| D1002477-v1 |
Phase Frequency Discriminator Front Panel |
Daniel Sigg |
Sensing and Control
|
20 Sep 2010 |
| D1000182-v2 |
IQ FET Demodulator Front Panel |
Daniel Sigg |
Sensing and Control
|
20 Sep 2010 |
| E1000441-x0 |
DCN for Advanced LIGO 312 Figure trial - Sample Prepearation E1000440-v1 |
GariLynn Billingsley |
Core Optics
|
17 Sep 2010 |
| E1000440-v1 |
Advanced LIGO 312 Figure trial – Sample Preparation |
GariLynn Billingsley |
Core Optics
|
17 Sep 2010 |
| E080516-v3 |
E080516_Advanced LIGO PR3 Polishing Specification |
Margot Hennig |
Core Optics
Final Design
|
14 Sep 2010 |
| T990081-v2 |
Time Domain Modal Model in End-to-End simulation package |
Hiro Yamamoto |
Core Optics
Modelling
|
13 Sep 2010 |
| T990091-x0 |
Time Domain Modal Model in End-to-End simulation package |
Hiro Yamamoto |
Core Optics
Modelling
|
13 Sep 2010 |
| E1000405-v1 |
Test Plan Table Top Frequency Stabilization Servo (TTFSS) |
Raphael Cervantes et al. |
Laser Systems
|
11 Sep 2010 |
| D1002037-v2 |
HAM Structure Lift Parts and Quantities |
Kurt Buckland |
System Engineering
|
09 Sep 2010 |
| D070579-v2 |
Upper Front Gusset, Structural Weldment, HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Sep 2010 |
| T1000530-v1 |
Procedure for Nikon LV-100 Microscope Defect Analysis |
Rand Dannenberg |
Core Optics
Basic R&D
|
08 Sep 2010 |
| T080321-v1 |
BSC Suspension Test Stand Electronics and Controls Quick Start Guide |
Jay Heefner |
Data Acquisition System
Suspensions
|
07 Sep 2010 |
| T1000525-x0 |
Loss budget by optics analysis using SIS |
Hiro Yamamoto |
Core Optics
Modelling
|
06 Sep 2010 |
| G1000788-v1 |
RFPD Noise Mitigation |
Rich Abbott |
Basic R&D
Sensing and Control
|
03 Sep 2010 |
| T0900289-v4 |
LIGO Instrument Science Priority Matrix |
David Shoemaker |
Detector
Basic R&D
Collaboration
Upgrades
|
02 Sep 2010 |
| E1000376-v1 |
RGA Test Results: A-OSEM Circuit Board Sub-Assembly (223 units) |
Dennis Coyne et al. |
Incoming Inspection
Suspensions
System Engineering
Vacuum
|
01 Sep 2010 |
| C1001188-v1 |
Statement of Work Fabrication and Assembly of IO Expansion Chassis for Advanced LIGO Controls |
Jay Heefner |
Data Acquisition System
Fabrication
|
20 Jul 2010 |
| E1000375-v1 |
RGA Test Results: A-OSEM Assemblies (quantity = first 7 production units; ICS bake 324) |
Dennis Coyne et al. |
Suspensions
System Engineering
Vacuum
|
31 Aug 2010 |
| D070576-v2 |
Lower Front Gusset, Structural Weldment, HLTS |
Derek Bridges |
Suspensions
Final Design
|
31 Aug 2010 |
| D070577-v2 |
Side Gusset, Structural Weldment, HLTS |
Derek Bridges |
Suspensions
Final Design
|
31 Aug 2010 |
| D070578-v2 |
Side Strut, Structural Weldment, HLTS |
Derek Bridges |
Suspensions
Final Design
|
31 Aug 2010 |
| D070580-v2 |
Top Gusset, Structural Weldment, HLTS |
Derek Bridges |
Suspensions
Final Design
|
31 Aug 2010 |
| E1000370-v1 |
GPIB Control Software |
Rich Abbott |
System Engineering
Subsystem Test
|
27 Aug 2010 |
| T1000508-v1 |
Comparison of the Scientific Cases for Two Networks: HHJLV and AHJLV |
Rainer Weiss et al. |
Modelling
Astrophysics / Multi-messenger
Data and Computing
|
26 Aug 2010 |
| D030021-v2 |
Screw, Socket Head Cap, 1/4-20 UNC-3A X 2.5 Long, Fully Threaded, Rounded End |
Derek Bridges |
Fabrication
System Engineering
Final Design
|
26 Aug 2010 |
| E1000196-v1 |
Optical Contamination Cavity Test Results: New Focus Picomotor 830X-UHV |
Liyuan Zhang et al. |
System Engineering
Sensing and Control
Vacuum
|
25 Aug 2010 |
| D0900946-v4 |
D0900946 Adapter A-16, 44 1/4" I.D. x 60 1/2" I.D., LIGO Vacuum Equipment |
Dennis Coyne et al. |
System Engineering
Vacuum
Final Design
|
23 Aug 2010 |
| P0900304-v8 |
Gravitational wave detector derived error signals for the LIGO thermal compensation system |
Joe Giaime et al. |
Core Optics
Basic R&D
Modelling
Sensing and Control
|
23 Aug 2010 |
| C1001360-v2 |
SOW for Manufacture of aLIGO TCS Ring Heater Upper & Lower Assembly Components |
Mindy Jacobson |
Auxiliary Optics
Fabrication
Vacuum
Final Design
|
19 Aug 2010 |
| D080006-v3 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, BS LS LOWER BOTTOM HALF |
Joe ODell et al. |
Suspensions
|
19 Aug 2010 |
| D030023-v3 |
Screw, Socket Head Cap, 1/4-20 UNC-3A X 1 Long, Fully Threaded, Rounded End |
Derek Bridges |
System Engineering
Final Design
|
16 Aug 2010 |
| D1001800-v2 |
Cavity Contamination Test Facility Block Diagram |
Rich Abbott |
Basic R&D
Vacuum
|
16 Aug 2010 |
| D1002175-v1 |
Timing Frequency Counter Front Panel |
Daniel Sigg |
Data Acquisition System
|
13 Aug 2010 |
| D1002176-v1 |
Timing Frequency Counter Rear Panel |
Daniel Sigg |
Data Acquisition System
|
13 Aug 2010 |
| T1000477-v1 |
Advanced LIGO Timing IRIG-B Interface Module |
Daniel Sigg et al. |
Data Acquisition System
|
11 Aug 2010 |
| E060231-v1 |
Printed Circuit Checklist Prior To Manufacture |
Rich Abbott |
Fabrication
System Engineering
|
11 Aug 2010 |
| D080042-v2 |
ADVANCED LIGO, SUS, BLADE CLAMP ASSY #1, BS TOP MASS |
Joe ODell |
Suspensions
|
05 Aug 2010 |
| T1000467-v1 |
4 Channel WFS Quad IQ Demodulator Module Misc. Parts |
Rich Abbott |
Assembly
Sensing and Control
|
04 Aug 2010 |
| D020653-v2 |
Screwdrive System, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
03 Aug 2010 |
| D020607-v3 |
T-Piece, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
03 Aug 2010 |
| D020605-v3 |
Main Section, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
03 Aug 2010 |
| D080504-v2 |
ADVANCED LIGO, SUS, THIS, BEAM SPLITTER UPPER STRUCTURE, BOTTOM RING |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080502-v2 |
ADVANCED LIGO, SUS - BEAM SPLITTER UPPER STRUCTURE, FACE PLATE |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080112-v2 |
ADVANCED LIGO, SUS, BS TRIPPLE, BS BOTTOM TABLECLOTH PLATE, BS BOTTOM TABLECLOTH |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080111-v2 |
ADVANCED LIGO, SUS, THIS, BS BOTTOM TABLECLOTH, BEAMSPLITTER SUSPENSION |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080109-v2 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH TOP PLATE, BEAMSPLITTER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080108-v2 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH SIDE PLATE, BEAMSPLITTER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080106-v2 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH FRONT PANEL, BEAMSPLITTER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080088-v2 |
ADVANCED LIGO, SUS, BLADE WIRE CLAMP, BS TOP STAGE |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080081-v2 |
ADVANCED LIGO, SUS, TOP STAGE STIFF BACK, BS TOP STAGE |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D070433-v2 |
ADVANCED LIGO, SUS, WIRE CLAMP JAW, BS MASSES |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D070432-v2 |
ADVANCED LIGO, SUS, BASE PLATE WIRE CLAMP BODY, BS TOP MASS |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D070428-v2 |
ADVANCED LIGO, SUS, TOP MASS N-P TYPE, STOP BRIDGE, BS TOP MASS |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D070424-v2 |
ADVANCED LIGO, SUS, PITCH ADJUSTER & MASS, BS TOP MASS |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D070419-v2 |
ADVANCED LIGO, SUS, BLADE CLAMP BOTTOM JAW, BS TOP MASS |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| E0900028-v1 |
BSC ISI-Quad Modal analysis |
Fabrice Matichard |
Seismic Isolation
System Test
|
02 Aug 2010 |
| G1000729-v1 |
LSC RFPD Analysis |
Rich Abbott |
Basic R&D
Sensing and Control
|
30 Jul 2010 |
| D047935-v4 |
Locker Spherical Pin |
Andy Stein et al. |
Seismic Isolation
Final Design
|
30 Jul 2010 |
| C1001262-v1 |
Statement of Work For Acquisition of 20 slot PCIe Expansion Backplanes for aLIGO |
Jay Heefner |
Procurements
Data Acquisition System
|
29 Jul 2010 |
| T1000434-v1 |
Advantages of cleaning optics with Red First Contact |
Margot Hennig |
Core Optics
|
27 Jul 2010 |
| D090438-v2 |
ADV LIGO, SUS, THIS, RINGHEATER ATTACHMENT PIECE, QUAD N-PTYPE LS |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D080243-v2 |
ADV LIGO, SUS, QUAD N-PTYPE PEN-RE MASS, EARTHQUAKE STOP MOUNT PLATE, PEN RE MASS BUMP STOPS |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D080242-v2 |
ADV LIGO, SUS, THIS, MODIFIED 1/4-20 UNC X 1" HEX HEAD, PEN RE MASS BUMP STOPS |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D080167-v2 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, CAN FRONT PLATE ITM PEN RE MASS CAN |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D1000943-v2 |
ALIGO TEST MASS RING HEATER INNER RING |
Mindy Jacobson et al. |
Auxiliary Optics
Fabrication
Preliminary Design
Vacuum
|
26 Jul 2010 |
| D070549-v2 |
ADVANCED LIGO, SUS, ETM/ITM LOWER STRUCTURE, UIM EARTHQUAKE STOP |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070547-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, REACTION CHAIN UIM STOP, RIGHT HAND |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070546-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, REACTION CHAIN UIM STOP, LEFT HAND |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070545-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, TEST CHAIN UIM STOP, LEFT HAND |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070544-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE SUSPENSION STRUCTURE, TEST CHAIN UIM STOP, RIGHT HAND |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070543-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, UIM TC E'QUAKE STOP ASSY #2 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070542-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, UIM RC E'QUAKE STOPS ASSY #2 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070541-v2 |
ADVANCED LIGO, SUS, AS DRW, UIM RC E'QUAKE STOP ASSY #1 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070540-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, UIM TC E'QUAKE STOP ASSY #1 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070238-v2 |
Advanced LIGO, SUS, Pen Re Mass Magnets, Steel Disk (External Shielded Magnets) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070236-v2 |
Advanced LIGO, SUS, Penultimate Mass Flag Assembly, Penultimate Mass Flag Mount (External Shielded Magnets) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070235-v2 |
Advanced LIGO, SUS, Pen Re Mass Magnets, Magnet Holder (External Shielded Magnets) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070226-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Cable Clamp Jaw |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070224-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Mass Side Wireclamp Body |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070223-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Pen Re Mass Wire Clamp |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060481-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ROUND MASS FRONT STOP |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060479-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, PEN RE MASS ASSY PAD |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060478-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, PENULTIMATE MASS LWR STOP MT 2 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060477-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, PENULTIMATE MASS LWR STOP MT 1 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060476-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, EARTHQUAKE-STOP MOUNTS-SHORT, LOWER STRUCTURE |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060462-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, INNER FACE PLATE LOWER STRUCTURE |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060450-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, SPACER # 4 (TEST MASS ADJUSTER) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060449-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ADJUSTABLE PAD, ADJUSTABLE PAD ASSY (LONG) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060447-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ADJUSTABLE PAD JAW, ADJUSTABLE PAD ASSY (LONG) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060430-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BASE PLATE |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| C961213-v1 |
Technical Direction Memorandum 15 to CBI: DI Water Specification |
Dennis Coyne |
Fabrication
Vacuum
|
23 Jul 2010 |
| D1001818-x0 |
aLIGO TCS Ring Heater Element Retainer, Left |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
23 Jul 2010 |
| T1000340-v1 |
Tiltmeter Characterization - Electro-Magnetic Anti-Spring, Hysteresis, Noise Testing and Analysis |
Riccardo DeSalvo et al. |
Seismic Isolation
Sensing and Control
|
23 Jul 2010 |
| D1001710-v1 |
I/O EXPANSION CHASSIS - SPOTWELD PANEL C |
Emery Brown |
Data Acquisition System
Fabrication
|
23 Jul 2010 |
| D060421-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, MASS AND SUPPORT MEMBER |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060420-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, WIRE CLAMP ADJUSTMENT BLOCK |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060419-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, TOP MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060417-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, OSEM MAGNET AND FLAG CONCEPT PART BUILT |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060415-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BLADE TIP Z POSITION ADJ (BTM HALF) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060414-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BLADE TiP Z POSITION ADJ (BTM HALF PART 2) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060413-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, 1/4" 20 UNC X 1" CAP HEAD, OSEM & ECD UNIT |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060412-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, OSEM BRACKET (TOP OSEM) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060411-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, TOP PLATE |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060408-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, ECD MAGNET MOUNT PLATE, OSEM MAGNET ASSEMBLY |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060407-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, OSEM & ECD UNIT BACKBONE, OSEM & ECD UNIT |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060406-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BASE PLATE STIFFENER |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060405-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, PITCH ADJUSTER |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060404-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BLADE CLAMP (TOP Half) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060399-v2 |
ADVANCED LIGO, SUS, QUAD TOP MASS N-PTYPE, STOP BRIDGE |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060398-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, PITCH ADJUSTER & MASS ADJUSTER TURRET |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060397-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, TOP MASS SPACER |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060395-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, WIRE CLAMP BODY (TOP MASS WIRE CLAMP) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060391-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, TOP WIRE CLAMP (Top Mass) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060385-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS FLAG MOUNT |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060382-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS TOP PLATE |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060381-v2 |
ADVANCED LIGO, SUS, UI MASS QUAD N-PTYPE, UI MASS BLADE ECD |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060380-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, BLADE CLAMP (TOP HALF) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060379-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, OSEM AND FLAG COUNTERWEIGHT UI MASS |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060378-v2 |
Advanced LIGO, SUS, Quad N-Ptype UI MASS, BLADE TIP Z POSITION ADJ (BTM HALF) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060377-v2 |
Advanced LIGO, SUS, Quad N-Ptype UI MASS, BLADE TIP Z POSITION ADJ (BTM HALF PART 2) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060376-v2 |
Advanced LIGO, SUS, Quad N-Ptype UI MASS, MASS BASE PLATE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060358-v2 |
Advanced LIGO, SUS, Quad N-Ptype DUMMY MASSES, DUMMY TEST MASS SIDE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060354-v2 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, CLAMPING COLLAR (PITCH MASS) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060350-v2 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, CONTROL RING, LIGO 1 OSEM MOUNT |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060344-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, BACK PLATE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060343-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, FRONT PLATE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060342-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, CENTRAL MASS |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060340-v2 |
ADVANCED LIGO, SUS, ROUND MASS WIRE CLAMP, ROUND MASS CLAMP JAW, PEN-RE MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060338-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, ROUND MASS WIRE CLAMP PLATE, PEN-RE MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060327-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, BLADE CLAMP (BTM HALF) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060326-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, BLADE CLAMP (TOP HALF) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060321-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, POSITION ADJUSTER FOR FRONT PITCH OSEM |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060318-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, OSEM AND ECD MOUNTING BRACKET (LOCAL CONTROLS) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060317-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, ECD STATIC BLOCK |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060315-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, TABLECLOTH PINCH PLATE, UPPER STRUCTURE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060313-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, TOP PLATE, NOISE TABLECLOTH |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060237-v2 |
ADV LIGO, SUS, QUAD N-PTYPE UI MASS, BOTTOM BLADE SPRINGS |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060236-v2 |
ADV LIGO, SUS, QUAD N-PTYPE TOP MASS, MIDDLE BLADE SPRING |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D1001815-x0 |
aLIGO TCS Ring Heater Winding Tool, Upper |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
Vacuum
Final Design
|
20 Jul 2010 |
| D0900990-v2 |
Screw, Socket Head Cap, #8-32 UNC-3A X 1.5 Long, Fully Threaded, Rounded End |
Derek Bridges |
System Engineering
Final Design
|
20 Jul 2010 |
| D060445-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, BUSH (ADJUSTABLE PAD ASSYS) |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D060444-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, BASE BAR - LONG (ADJUSTABLE STOP MECHANISM) |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D060357-v2 |
Advanced LIGO, SUS, ASSEMBLY MASSES Quad N-Ptype, HALF MASS (DUMMY HALF REACTION MASS) |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D070216-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Upper Structure Stay Wire Clamp |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D070215-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Wire Clamp Body (Top Ring Wire Clamp) |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| G1000710-v2 |
Tiltmeter Characterization - EMAS, Hysteresis Noise Studies 2009 presentation |
Riccardo DeSalvo et al. |
Seismic Isolation
Basic R&D
Sensing and Control
|
19 Jul 2010 |
| D1001809-v1 |
aLIGO PSL/IO optical table leg |
Richard Savage |
Fabrication
Laser Systems
|
16 Jul 2010 |
| T050089-v1 |
Snapshot of LIGO Mechanical Resonances HTML Pages, Circa S1-S4 |
Michael Landry |
Core Optics
Basic R&D
|
16 Jul 2010 |
| T970191-v1 |
Test Mass Transmissibility |
Dennis Coyne |
Core Optics
Modelling
|
16 Jul 2010 |
| C1000290-v4 |
SOW for the BSC installation tooling 5-axis tables |
Kurt Buckland et al. |
System Engineering
|
15 Jul 2010 |
| G1000323-v1 |
40m upgrade status |
Koji Arai |
Meeting
Sensing and Control
Upgrades
|
15 Jul 2010 |
| G1000546-v1 |
Simulated Plant Approach |
Peter Michael Kalmus et al. |
Basic R&D
Modelling
Commissioning
Sensing and Control
|
15 Jul 2010 |
| D1001714-v1 |
I/O EXPANSION CHASSIS - TOP COVER |
Emery Brown |
Data Acquisition System
Fabrication
|
13 Jul 2010 |
| D1001711-v1 |
I/O EXPANSION CHASSIS - SPOTWELD PANEL D |
Emery Brown |
Data Acquisition System
Fabrication
|
13 Jul 2010 |
| D1001707-v1 |
I/O EXPANSION CHASSIS - REAR BOTTOM PANEL |
Emery Brown |
Data Acquisition System
Fabrication
|
13 Jul 2010 |
| D1001706-v1 |
I/O EXPANSION CHASSIS - INTERNAL PANEL |
Emery Brown |
Data Acquisition System
Fabrication
|
13 Jul 2010 |
| D1001705-v1 |
I/O EXPANSION CHASSIS - INTERNAL BRACKET |
Emery Brown |
Data Acquisition System
Fabrication
|
13 Jul 2010 |
| D1001704-v1 |
I/O EXPANSION CHASSIS - I/O BRACKET |
Emery Brown |
Data Acquisition System
Fabrication
|
13 Jul 2010 |
| D1001703-v1 |
I/O EXPANSION CHASSIS - BACK PANEL |
Emery Brown |
Data Acquisition System
Fabrication
|
13 Jul 2010 |
| D1001702-v1 |
I/O EXPANSION CHASSIS - HANDLE BRACKET |
Emery Brown |
Data Acquisition System
Fabrication
|
13 Jul 2010 |
| D0901845-x0 |
COC_CONTAINER_SIMPLIFIED-obsolete |
Ken Mailand |
Core Optics
Preliminary Design
|
13 Jul 2010 |
| D0901548-v2 |
AOSEM Adjustment Collar |
Bobby Moore |
Suspensions
Final Design
|
13 Jul 2010 |
| T050071-v1 |
Advanced LIGO Quad Suspension Installation Fixtures Design Review |
Dennis Coyne |
System Engineering
|
12 Jul 2010 |
| T1000381-v1 |
Advanced LIGO Core Optics Coating Design summary |
GariLynn Billingsley |
Core Optics
Final Design
|
09 Jul 2010 |
| T1000383-v1 |
Advanced LIGO Core Optics Polishing Design summary |
GariLynn Billingsley |
Core Optics
Final Design
|
09 Jul 2010 |
| T1000380-v1 |
Caltech WYKO pixel calibration |
GariLynn Billingsley |
Core Optics
Quality Assurance
Subsystem Test
|
09 Jul 2010 |
| D1001724-x0 |
CHASSIS FAN MODULE SHIELD |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D1001723-x0 |
CHASSIS FAN MODULE |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D1001719-x0 |
I/O EXPANSION CHASSIS |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D1001718-x0 |
I/O EXPANSION CHASSIS |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D1001717-x0 |
I/O EXPANSION CHASSIS |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D1001716-x0 |
I/O EXPANSION CHASSIS |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D1001713-x0 |
I/O EXPANSION CHASSIS |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D1001708-x0 |
I/O EXPANSION CHASSIS |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D080221-v2 |
Guard, Lower Blade, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
07 Jul 2010 |
| D0900947-v4 |
Adapter A-17, 44 5/8" I.D. x 72 1/4" I.D., LIGO Vacuum Equipment |
Dennis Coyne et al. |
System Engineering
Vacuum
Final Design
|
06 Jul 2010 |
| D0900666-v2 |
Base Plate, Library of Clamps, Upper Blade, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
06 Jul 2010 |
| D0902348-v1 |
PLATE, ETM MIRROR STOP, COC CONTAINER |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902246-v4 |
TOP PLATE, ETM, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902152-v1 |
SHIPPING SLEEVE, ETM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902151-v1 |
OUTER SLEEVE, ETM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902150-v2 |
UPPER LOCATING SLEEVE, ETM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902148-v2 |
WEDGE PLATE, ETM, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902147-v3 |
BASE PLATE, ETM, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902145-v1 |
SHIPPING SLEEVE, R OPTIC, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902144-v1 |
OUTER SLEEVE, R OPTIC, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902143-v2 |
UPPER LOCATING SLEEVE, R OPTIC, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0900764-v2 |
EOM/AOM Driver Rear Mouting Plate |
Daniel Sigg |
Sensing and Control
|
29 Jun 2010 |
| D0902142-v2 |
LOCATING SHAFT, R OPTIC, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D1001659-v1 |
EOM/AOM Driver Rear Mouting Plate Adapter 2 |
Daniel Sigg |
Sensing and Control
|
29 Jun 2010 |
| D0902140-v3 |
TOP PLATE, R OPTIC, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D1001658-v1 |
EOM/AOM Driver Rear Mouting Plate Adapter 1 |
Daniel Sigg |
Sensing and Control
|
29 Jun 2010 |
| D0902139-v3 |
BASE PLATE, R OPTIC, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902128-v1 |
SHIPPING SLEEVE, FM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902126-v1 |
OUTER SLEEVE, FM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902124-v2 |
LOCATING SHAFT, FM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902121-v3 |
BASE PLATE, FM, COC CONTAINER |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902490-v1 |
Cover, Centryco CC-025-0050-013-DAE, Advanced LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902330-v1 |
PILOT FOR CC-025-0050-013-DAE COVER |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902495-v2 |
GUIDE, OPTIC, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
28 Jun 2010 |
| D0902331-v1 |
RETAINER FOR CC-025-0050-013-DAE COVER |
Kurt Buckland |
Core Optics
System Engineering
|
28 Jun 2010 |
|