2013-07-10 08:44:57 jay.copti@LIGO.ORG
    05/31/2013 - CIT - Build (SRI Hermetics Inc.)
        05/31/2013 Jay Copti Modification Description
            The following components were modified for Notch Adjustment Frequencies RFPD (36 & 45 )
                                    
                                    Cap/Res			 Inductors
                                    C6: 10 PF	         L1: 750 nH
                                    C9: 10 PF		 L2: 100 nH
                                    C10: 20 PF		 L3: 1800 nH
                                    C14: 10 PF		 L4: Remove
                                    C16: 20 PF		 L5: 100 nH
                                    C21: 40 PF (Var)	 L6:100 nH
                                    C22: 30 PF (Var)	 L7: 470 nH
                                    C23: 20 PF (Var)	 L8: 100 nH
                                    C24: 20 PF (Var)	
                                    R9: 200 Ohms
        05/31/2013 Jay Copti Acceptance Test Description and Results
            Acceptance test per Test Plan DCC # T1200347-v1 and a list of ISC detector measured parameters (RF & DC) data recorded can be found in T1200346-v3 under S/N: S1300632
        05/31/2013 Jay Copti Manufacturing Notes
            It was shipped to Fred Williams at SRI Hermetics Inc. to install the back cover and seal it

2013-07-10 08:53:35 jay.copti@LIGO.ORG
    07/09/2013 - CIT - Test (N.A.)
        07/10/2013 Jay Copti Acceptance Test Description and Results
            Acceptance test per test plane Dcc # T1300506-v1 in clean room environment test was good it pass

2013-07-10 09:43:39 charles.osthelder@LIGO.ORG
    07/10/2013 - LLO - Transfer (shipped to Valera Frolov, LLO)
        07/10/2013 Charles Osthelder Manufacturing Notes
            Class A clean, ventilated QPD installed.  Shipped with Class A clean base, alumina spacer, PEEK washers and vented SS socket cap screws, 1/4"-20x 3/4" and 4-40x3/8" for final assembly at site.