Document List by Author

Sam Barnum of LIGO - Massachusetts Institute of Technology is listed as an author on the following documents:

LIGO-Number Title Author(s) Topic(s) Last Updated
D071450-v2 Asm, HAM-ISI Locker Andy Stein et al. Final Design
Seismic Isolation
22 Feb 2019
D1000484-v11 ISC TRANSMON ASSEMBLY Jason Fishner et al. Assembly
Sensing and Control
Final Design
07 Jun 2017
D071462-v2 Asm, Position Sensor Target Face Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071165-v2 Sensor Target Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D1000313-v14 ISC HAM1 Assembly Lisa Barsotti et al. Assembly
Sensing and Control
04 Sep 2018
P1200011-v6 Dynamics Enhancements of Advanced LIGO Multi-Stage Active Vibration Isolators and Related Control Performance Improvement Fabrice Matichard et al. Seismic Isolation
Basic R&D
20 Jun 2018
G0900676-v3 Advanced LIGO Preliminary Design Review of the BSC ISI system - Overview Presentation Stephany Foley et al. Seismic Isolation
Preliminary Design
Reviews
20 Jun 2018
D1300146-v7 HAM Storage Container Conversion, 3rd IFO Sam Barnum et al. Final Design
Suspensions
Installation
System Engineering
25 Jan 2018
D1003318-v3 ISC Fast Shutter Mechanical Assembly Jason Fishner et al. Sensing and Control
Final Design
25 Feb 2015
D1102451-v2 aLIGO SUS L1 H1 HAM5 HLTS PRE INSTALLATION PLATE Sam Barnum Final Design
Suspensions
Installation
18 Sep 2013
D1101855-v3 aLIGO SUS L1 H1 HAM4 HSTS PRE INSTALLATION PLATE Sam Barnum et al. Final Design
Input Optics
Installation
18 Sep 2013
D1200927-v1 Periscope, HAM-1, ISC, aLIGO Sam Barnum Assembly
Sensing and Control
01 Jun 2017
D1003319-v4 BOBBIN-COIL Assembly, ISC, aLIGO Sam Barnum Sensing and Control
Conceptual Design
26 May 2017
D0900648-v5 Pod,Trillium 240 OBS seismometer Sam Barnum Final Design
Seismic Isolation
03 May 2016
D1300117-v2 ADAPTER, UPA2 OPTIC HOLDER, ISC, aLIGO Sam Barnum Sensing and Control
Final Design
23 Mar 2016
D0901182-v1 aLIGO, SEI, BSC-ISI, Top Assembly Stephany Foley et al. Final Design
Seismic Isolation
12 Aug 2015
D1201441-v5 Earthquake Stop Assembly (OMCS) Sam Barnum Sensing and Control
Final Design
30 Jun 2015
D1201474-v2 Knob, Earthquake Stop Assembly (OMCS) Sam Barnum Sensing and Control
Final Design
20 Apr 2015
D1201471-v3 Main Bar, Earthquake Stop Assembly (OMCS) Sam Barnum Sensing and Control
Final Design
20 Apr 2015
D1201478-v3 Horizontal Adjust, Earthquake Stop Assembly (OMCS) Sam Barnum et al. Sensing and Control
Final Design
20 Apr 2015
D1201476-v2 Side Bracket, Earthquake Stop Assembly (OMCS) Sam Barnum Sensing and Control
Final Design
20 Apr 2015
D1201473-v2 Right Support, Earthquake Stop Assembly (OMCS) Sam Barnum Sensing and Control
Final Design
12 Mar 2015
D1201472-v2 Left Support, Earthquake Stop Assembly (OMCS) Sam Barnum Sensing and Control
Final Design
12 Mar 2015
D1300606-v2 ALS Faraday Isolator Fixed Base Bram Slagmolen et al. Sensing and Control
Commissioning
05 Mar 2015
T1000276-v5 Output Mode Cleaner (OMC) Design Koji Arai et al. Sensing and Control
Final Design
02 Mar 2015
D1102211-v2 (OBSOLETE) aLIGO OMC Diode Mount Glass Block Sam Waldman et al. Sensing and Control
Final Design
07 Feb 2015
D1102216-v1 (OBSOLETE) aLIGO Output Mode Cleaner Diode Mount Strain Relief Sam Waldman et al. Sensing and Control
Final Design
07 Feb 2015
D1102213-v1 (OBSOLETE) aLIGO Output Mode Cleaner 3mmPD Diode Mount Carrier Sam Waldman et al. Sensing and Control
Final Design
07 Feb 2015
D1102130-v2 aLIGO Linear Motor Assembly Sam Waldman et al. Sensing and Control
Preliminary Design
22 Jan 2015
D1200384-v2 Custom TC-3 Dog Clamp, ISC, aLIGO Sam Barnum et al. Final Design
Seismic Isolation
22 Jan 2015
D1300548-v1 Beam Dump, Fast Shutter, HAM6, aLIGO Sam Barnum Sensing and Control
Conceptual Design
19 Jan 2015
D1002843-v1 aLIGO Installation, LHO X-End Station, Cartridge & Cleanroom, Layout John Worden et al. Installation
Observatory Facilities
14 Jan 2015
D1001797-v2 aLIGO Installation, LHO Y-End Station, Cartridge & Cleanroom, Layout Dennis Coyne Installation
14 Jan 2015
D1002834-v2 aLIGO Installation, LLO Y-End Station, Cartridge & Cleanroom, Layout Brian O'Reilly et al. Conceptual Design
Installation
Observatory Facilities
14 Jan 2015
D1002847-v1 aLigo Installation, LLO Corner Station, Cartridge + Cleanroom, Layout John Worden et al. Installation
Observatory Facilities
14 Jan 2015
T0900226-v1 ISI actuator dynamic response identification Sam Barnum et al. Seismic Isolation
Basic R&D
09 Jan 2015
D1300073-v1 Cable Post, TMS, ISC, aLIGO Sam Barnum Sensing and Control
Final Design
Fabrication
19 Dec 2014
E1200344-v4 All BSC, Install Completed Cartridge Into Chamber Procedure, aLIGO Sam Barnum et al. Seismic Isolation
Core Optics
Suspensions
Installation
18 Dec 2014
D1300242-v1 1" Mirror Mount, LH, 4" Beam Height, ISA, aLIGO Sam Barnum Assembly
Sensing and Control
04 Dec 2014
D1300241-x0 1" Lens Mount, 4" Beam Height, ISC, aLIGO Sam Barnum Assembly
Sensing and Control
04 Dec 2014
D1300231-v1 2in. MIRROR MOUNT, RH HOLDER, 4in. BEAM HEIGHT, ISC, aLIGO Sam Barnum Sensing and Control
Fabrication
04 Dec 2014
D1300230-v1 2in. MIRROR MOUNT, LH HOLDER, 4in. BEAM HEIGHT, ISC, aLIGO Sam Barnum Sensing and Control
Fabrication
04 Dec 2014
D1100642-v9 ISC Rotary Beam Diverter Assembly Jason Fishner et al. Sensing and Control
Final Design
20 Aug 2014
D961106-v1 LIGO Vacuum Equipment Release for Quotes - 104 1/2" I.D. Flange Set Detail Sam Barnum Document Migration
13 Aug 2014
D1300123-v2 ASSEMBLY, MODIFIED UPA1 & UPA2 OPTIC HOLDER, ISC, aLIGO Sam Barnum Sensing and Control
Fabrication
14 Jul 2014
E0900357-v28 aLIGO BSC-ISI, General Assembly Procedure Michael Hillard et al. Assembly
Seismic Isolation
18 Jun 2014
D1102002-v6 ASC RFPD ENCLOSURE, IN-VACUUM, TOP ASSEMBLY Rich Abbott et al. Sensing and Control
Fabrication
03 Mar 2014
T0900060-v2 OMC Suspension Final Design Document Jay Heefner et al. Final Design
Suspensions
20 Feb 2014
D1101856-v1 OBSOLETE (DO NOT USE) Sam Barnum et al. Final Design
Input Optics
Installation
29 Jan 2014
D1201502-v2 Bracket and Preamp Assembly (OMCS) Sam Barnum Sensing and Control
Final Design
05 Dec 2013
D1201012-v1 Back, Periscope, Double Beam, In Air, aLIGO Sam Barnum Sensing and Control
Final Design
05 Dec 2013
D1200998-x0 aLIGO Linear Motor Magnet Sam Barnum Sensing and Control
Final Design
03 Dec 2013
D1003325-v2 ISC Fast Shutter Hardstop Jason Fishner et al. Sensing and Control
Conceptual Design
03 Dec 2013
D1200105-v2 Breadboard OMC aLIGO Sam Barnum et al. Sensing and Control
Conceptual Design
22 Nov 2013
D1300965-v1 TUBE, BEAM DUMP, HAM6, aLIGO Sam Barnum et al. Sensing and Control
20 Nov 2013
D1003326-v2 ISC Fast Shutter Base aLIGO Sam Barnum Sensing and Control
Final Design
18 Nov 2013
D1003324-v2 ISC Fast Shutter Bracket aLIGO Sam Barnum et al. Sensing and Control
Fabrication
13 Nov 2013
D1300320-v3 BOBBIN, FAST SHUTTER, ISC, aLIGO Sam Barnum Sensing and Control
Final Design
05 Nov 2013
D1300557-v1 Bottom, Clamp, BeamDump, Fast Shutter, HAM6, aLIGO Sam Barnum Seismic Isolation
Fabrication
01 Nov 2013
D1300558-v1 Top, Clamp, BeamDump, Fast Shutter, HAM6, aLIGO Sam Barnum Sensing and Control
Fabrication
01 Nov 2013
G1300952-v1 aLIGO Output Mode Cleaner: Design, Fabrication, and Installation Rich Abbott et al. Sensing and Control
Final Design
Fabrication
Installation
20 Sep 2013
D1102449-v2 aLIGO SUS L1 H1 HAM5 PRE INSTALLATION PLATE LAYOUT Sam Barnum et al. Final Design
Suspensions
Installation
05 Oct 2012
D1102450-v2 aLIGO SUS L1 H1 HAM5 HSTS PRE INSTALLATION PLATE Sam Barnum et al. Final Design
Suspensions
Installation
05 Oct 2012
D1200047-v3 aLIGO SUS L1 H1 HAM5 AOS-FI PRE INSTALLATION PLATE Sam Barnum et al. Final Design
Suspensions
Installation
18 Sep 2013
D1101864-v4 aLIGO SUS L1 H1 HAM4 SR2 PRE INSTALLATION PLATE LAYOUT Sam Barnum et al. Final Design
Suspensions
Installation
16 Sep 2013
D1300678-v2 BSC Storage Container Conversion for HAM1, 3rd IFO Sam Barnum Seismic Isolation
Installation
09 Aug 2013
D1300676-v1 Tie, Riser, Storage, HAM1, 3rd IFO, aLIGO Sam Barnum Final Design
Seismic Isolation
Fabrication
Installation
09 Aug 2013
D1300675-v1 Riser, Storage, HAM1, 3rd IFO, aLIGO Sam Barnum Final Design
Seismic Isolation
Fabrication
09 Aug 2013
E1300598-v1 BSC4-L1 & BSC9-H1, Requirements and Procedure, Cartridge Flight and Insertion into BSC Chamber, aLIGO Sam Barnum Seismic Isolation
Suspensions
Installation
31 Jul 2013
E1300597-v1 BSC5-L1 & BSC10-H1, Requirements and Procedure, Cartridge Flight and Insertion into BSC Chamber, aLIGO Sam Barnum Seismic Isolation
Suspensions
Installation
16 Jul 2013
D1300595-v2 HALF WAVE PLATE MOUNT, HAM1, aLIGO Sam Barnum Assembly
Sensing and Control
09 Jul 2013
D1300538-v1 Retaining Ring 175-0025-10, CVI 1100-10-V Mount Sam Barnum et al. Sensing and Control
Final Design
02 Jul 2013
D1300596-v1 O-Ring, 175-0031-10, CVI 1100-10-V Mount Sam Barnum Sensing and Control
Final Design
02 Jul 2013
E1300516-x0 DCN for ALS End Station Periscopes Bram Slagmolen et al. Sensing and Control
Fabrication
01 Jul 2013
E1300570-x0 DCN for Half Wave Plate Mount, HAM1, aLIGO Sam Barnum Assembly
Sensing and Control
Final Design
Fabrication
26 Jun 2013
D1300590-v2 2.25in OPTICAL MOUNT POST, aLIGO Sam Barnum Sensing and Control
Final Design
Fabrication
24 Jun 2013
C1301986-v1 SOW for FAST SHUTTER COIL WINDING, aLIGO Sam Barnum Sensing and Control
Fabrication
17 Jun 2013
D1300560-x0 Top, Clamp, BeamDump, Fast Shutter, HAM6, aLIGO Sam Barnum Sensing and Control
Fabrication
14 Jun 2013
D1300559-x0 Top, Clamp, BeamDump, Fast Shutter, HAM6, aLIGO Sam Barnum Sensing and Control
Fabrication
14 Jun 2013
D1300556-x0 Pipe, BeamDump, HAM6, aLIGO Sam Barnum Sensing and Control
Fabrication
14 Jun 2013
D1200999-v1 aLIGO Linear Motor Shim Sam Barnum Sensing and Control
Final Design
03 Jun 2013
D1200990-v1 aLIGO Linear Motor Coil Guide Sam Barnum Sensing and Control
Final Design
31 May 2013
E1300501-x0 DCN for Fast Shutter Aluminum parts Sam Barnum Sensing and Control
Fabrication
30 May 2013
E1300127-x0 DCN for Adapter Plate, HAM Storage Container Conversion, 3rd IFO Sam Barnum Assembly
Final Design
Seismic Isolation
Fabrication
Suspensions
Auxiliary Optics
22 May 2013
D1300289-v2 Adapter Plate, HAM Storage Container Conversion, 3rd IFO Sam Barnum et al. Conceptual Design
Suspensions
LIGO-India
Auxiliary Optics
22 May 2013
D1201475-v1 Top Bracket, Earthquake Stop Assembly (OMCS) Sam Barnum Sensing and Control
Final Design
14 May 2013
D1201440-v3 Threaded Bumper, Earthquake Stop Assembly (OMCS) Sam Barnum Sensing and Control
Final Design
14 May 2013
D1201501-v1 Bracket, Preamp (OMCS) Sam Barnum Final Design
Seismic Isolation
14 May 2013
E1300416-x0 RFQ for CARRIER, BOBBIN, FAST SHUTTER, aLIGO Sam Barnum Sensing and Control
Procurements
Fabrication
10 May 2013
E1101086-v6 OMC Optical Prisms Sam Waldman et al. Sensing and Control
Requirements
03 May 2013
D1300288-x0 Adapter Plate, HAM Storage Container Conversion, 3rd IFO Sam Barnum Seismic Isolation
Conceptual Design
LIGO-India
28 Mar 2013
D1300214-x0 2" LENS MOUNT ASSY, FOR 4" HIGH BEAM Sam Barnum Assembly
08 Mar 2013
E1300159-x0 DCN for updated ISC Rotary Beam Diverter D1100642 Sam Barnum Sensing and Control
Fabrication
01 Mar 2013
D1300144-x0 WEDGE, ASSEMBLY, OMC V BAFFLE, ISC, aLIGO Sam Barnum Sensing and Control
Final Design
21 Feb 2013
D1300140-v1 JIG, ASSEMBLY, OMC V BAFFLE, ISC, aLIGO Sam Barnum Assembly
Sensing and Control
Fabrication
21 Feb 2013
D1300121-v1 MODIFIED UPA2 OPTIC HOLDER, ISC, aLIGO Sam Barnum Sensing and Control
Fabrication
12 Feb 2013
D1300124-v1 MODIFIED UPA1 OPTIC HOLDER, ISC, aLIGO Sam Barnum Sensing and Control
Final Design
12 Feb 2013
D1300034-v1 ADAPTER, MH25 OPTIC HOLDER, ISC, aLIGO Sam Barnum Sensing and Control
Final Design
07 Feb 2013
D1300082-v1 Cable Post T-Top, TMS, ISC, aLIGO Sam Barnum Sensing and Control
Final Design
Fabrication
01 Feb 2013
D1300074-v1 Cable Post Assembly, TMS, ISC, aLIGO Sam Barnum Assembly
Sensing and Control
Final Design
Installation
01 Feb 2013
D1300033-v1 BRACKET, CABLE, TABLE, TMS, ISC, aLIGO Sam Barnum Sensing and Control
Installation
30 Jan 2013
D1100570-v2 Stage 0-1 Angled Blades Spacer, aLIGO BSC-ISI Fabrice Matichard et al. Final Design
Seismic Isolation
17 Jan 2013
D1102388-v3 ALIGO HAM Viton Spring Leg Stack Assembly Stephany Foley et al. Final Design
Seismic Isolation
03 Jan 2013
D1002842-v1 aLIGO Installation, LLO X-End Station, Cartridge & Cleanroom, Layout Brian O'Reilly et al. Installation
Observatory Facilities
18 Dec 2012
D1002400-v1 aLigo Installation, LHO Corner Station, Cartridge + Cleanroom, Layout John Worden et al. Installation
System Engineering
12 Dec 2012
D1201318-v1 Passive Isolation stack shim for LHO, aLIGO Sam Barnum Sensing and Control
Final Design
Seismic Isolation
06 Dec 2012
D1102387-v3 ALIGO HAM Optics Table Assembly- Passive Stack Stephany Foley et al. Final Design
Seismic Isolation
06 Dec 2012
T080261-v3 Building L4-C Pods Stephany Foley et al. Final Design
Seismic Isolation
12 Oct 2012
D1200749-v3 AL Mass Replacement for ECD Magnet Assembly Sam Barnum et al. Sensing and Control
Final Design
12 Oct 2012
D1001990-v3 Platform Walkway, BSC Installation Sam Barnum Seismic Isolation
Installation
01 Oct 2012
D1102007-v1 ASC VAC ENCLOSURE - alumina spacer aLIGO Rich Abbott et al. Sensing and Control
Fabrication
19 Sep 2012
D1101997-v2 LSC VAC ENCLOSURE - alumina spacer aLIGO Rich Abbott et al. Sensing and Control
Fabrication
19 Sep 2012
D1201013-v1 Periscope, Double Beam, In Air, aLIGO Sam Barnum Sensing and Control
Final Design
18 Sep 2012
D1102006-v3 ASC VAC Enclosure - photo hood bracket aLIGO Rich Abbott et al. Sensing and Control
Fabrication
17 Sep 2012
D1102003-v4 ASC VAC Enclosure - BASE aLIGO Rich Abbott et al. Sensing and Control
Fabrication
17 Sep 2012
D1101993-v3 LSC VAC Enclosure - Base aLIGO Rich Abbott et al. Sensing and Control
Fabrication
17 Sep 2012
D1101996-v3 LSC VAC Enclosure - photo hood mount aLIGO Rich Abbott et al. Sensing and Control
Fabrication
17 Sep 2012
E1200819-x0 DCN FOR UPDATES TO LSC+ASC ENCLOSURES Rich Abbott et al. Sensing and Control
Final Design
14 Sep 2012
D1101994-v3 LSC IN-VACUUM ENCLOSURE - MAIN BODY Rich Abbott et al. Sensing and Control
Fabrication
13 Sep 2012
D1102004-v6 ASC IN-VACUUM ENCLOSURE - MAIN BODY Rich Abbott et al. Sensing and Control
Fabrication
13 Sep 2012
D1101995-v2 LSC IN-VACUUM ENCLOSURE - LID Rich Abbott et al. Sensing and Control
Fabrication
13 Sep 2012
D1102005-v2 ASC IN-VACUUM ENCLOSURE - LID Rich Abbott et al. Sensing and Control
Fabrication
13 Sep 2012
D1001760-v2 Stage 1 Vibration Absorber (door) Sebastien Biscans et al. Final Design
Seismic Isolation
04 Sep 2012
E1200792-x0 DCN for update to BSC-ISI Keel Mass Ballast Sam Barnum Seismic Isolation
Installation
29 Aug 2012
E1200705-x0 DCN for v2 parts of the vibration absorber for the front doors of stage 1 (aLIGO BSC-ISI system) Sam Barnum Final Design
Seismic Isolation
28 Aug 2012
E1200786-x0 DCN for BSC-ISI Stage1 Add Dampers and remove Trim mass Sam Barnum Sensing and Control
Upgrades
28 Aug 2012
E1200751-x0 DCN for Periscope, Double Beam, In Air, aLIGO Sam Barnum Sensing and Control
Final Design
13 Aug 2012
D1000513-v1 HEPI ASSEMBLY, BSC aLIGO Sam Barnum Final Design
Seismic Isolation
06 Aug 2012
D070300-v2 HAM Riser Assembly Fabrice Matichard et al. Final Design
Seismic Isolation
02 Jul 2012
D1102209-v3 aLIGO Output Mode Cleaner Mount Bracket Sam Waldman et al. Sensing and Control
Final Design
29 Jun 2012
E1200232-v2 Riser, HAMs 6L, 6H, 12H calculations, aLIGO Sam Barnum Sensing and Control
Seismic Isolation
Installation
27 Jun 2012
D1200961-x0 Clamp, Wire, Suspension, OMC Sam Barnum Sensing and Control
Final Design
25 Jun 2012
E1200606-x0 DCN for AL Mass Replacement for OSEM Magnet Assembly Sam Barnum Final Design
Suspensions
07 Jun 2012
E080012-v2 HAM ISI Installation into HAM Chamber: Installation Procedure Sam Barnum et al. Seismic Isolation
Installation
05 Jun 2012
D1200688-x0 aLIGO, CABLES, ASSEMBLY, CABLE MOUNT Sam Barnum Final Design
Auxiliary Optics
30 May 2012
E1200486-x0 aLIGO, SEI Ken Mason et al. Seismic Isolation
16 May 2012
D1200658-x0 Flexible Tube Mount, 10in, ISC Table, aLIGO Sam Barnum et al. Final Design
Auxiliary Optics
27 Apr 2012
D1200521-v1 Riser for HAM1-L1 ISI aLIGO Sam Barnum Final Design
Seismic Isolation
09 Apr 2012
D1200530-v1 Riser for HAM1-H1 ISI aLIGO Sam Barnum Final Design
Seismic Isolation
Installation
09 Apr 2012
E080053-v1 HAM ISI Installation into HAM Chamber: Dimensions and Specifications Sam Barnum et al. Seismic Isolation
Installation
01 Apr 2012
D1200349-v1 Upper Riser for LHAM-6 ISI aLIGO Sam Barnum Final Design
Seismic Isolation
19 Mar 2012
D070302-v1 HAM Tube Bracket Fabrice Matichard et al. Document Migration
19 Mar 2012
D040001-v2 HEPI-BSC TOP LEVEL ASSY, aLIGO BSC Michael Hillard et al. Final Design
Seismic Isolation
16 Mar 2012
D1200354-v1 Upper Riser for WHAM-12 ISI aLIGO Sam Barnum Final Design
Seismic Isolation
14 Mar 2012
D1200353-v1 Upper Riser for WHAM-6 ISI aLIGO Sam Barnum Final Design
Seismic Isolation
14 Mar 2012
E1200264-x0 SOW for Dog Clamp, QPD Sled, aLIGO Sam Barnum Final Design
Core Optics
Installation
02 Mar 2012
D1200256-v1 Vacuum Bake Rack Front-Back 1-3in Optics aLIGO Sam Barnum Final Design
Core Optics
Suspensions
Input Optics
01 Mar 2012
D1200254-v1 Vacuum Bake Rack Lt-Side 1-3in Optics aLIGO Sam Barnum Final Design
Core Optics
Suspensions
Input Optics
01 Mar 2012
D1200255-v1 Vacuum Bake Rack Rt-Side 1-3in Optics aLIGO Sam Barnum Final Design
Core Optics
Suspensions
Input Optics
01 Mar 2012
D1200253-v1 Vacuum Bake Rack 1-3in Optics aLIGO Sam Barnum Final Design
Core Optics
Suspensions
Input Optics
21 Feb 2012
D1200090-v2 Spacer ISI Support Tube HAM5 LLO aLIGO Sam Barnum Seismic Isolation
Installation
01 Feb 2012
D1200153-v1 aLIGO Output Mode Cleaner Diode Mount Carrier QPD Sam Barnum et al. Sensing and Control
Final Design
27 Jan 2012
D1101968-v3 Advanced LIGO Output Mode Cleaner Optical Prism Sam Waldman et al. Final Design
Fabrication
30 Nov 2011
D1102069-v2 Advanced LIGO Output Mode Cleaner Mounting Prism Sam Waldman et al. Sensing and Control
Final Design
30 Nov 2011
D1101737-v1 Fit Check, Test-Stand, Cartridge, Cleanroom, aLIGO Sam Barnum Seismic Isolation
Installation
27 Sep 2011
D1101707-v3 Shelf, Eddy current damper, UIM Tooling, aLIGO Sam Barnum et al. Final Design
Suspensions
15 Sep 2011
D1101706-v2 Horizontal Mount, Eddy current damper, UIM Tooling, aLIGO Sam Barnum et al. Final Design
Suspensions
15 Sep 2011
D1101705-v2 Vertical Mount, Eddy current damper, UIM Tooling, aLIGO Sam Barnum et al. Final Design
Suspensions
15 Sep 2011
D1101704-v2 Slide Bracket Mount, Eddy current damper, UIM Tooling, aLIGO Sam Barnum et al. Final Design
Suspensions
15 Sep 2011
D1101703-v2 Slide-Horizontal Mount, Eddy current damper, UIM Tooling, aLIGO Sam Barnum et al. Final Design
Suspensions
15 Sep 2011
D1101701-v2 Cup, Eddy current damper, UIM Tooling, aLIGO Sam Barnum et al. Final Design
Suspensions
15 Sep 2011
D1101702-v2 JIG, Eddy current damper, UIM Tooling, aLIGO Sam Barnum et al. Final Design
Suspensions
15 Sep 2011
D1000753-v2 Base, Safety, Lift Hook Receiver, aLIGO BSC ISI Michael Hillard et al. Final Design
Seismic Isolation
09 Sep 2011
E1100816-x0 SOW, JIG, Eddie current damper, UIM Tooling, aLIGO Sam Barnum et al. Fabrication
Suspensions
28 Aug 2011
D1101583-v1 Cover, C-3 Fabric, Cartridge, BSC, aLIGO Sam Barnum Final Design
Seismic Isolation
System Engineering
15 Aug 2011
D1002124-v3 Stand, Test, BSC-ISI+Quad + HAM-ISI, aLIGO Sam Barnum Final Design
Seismic Isolation
08 Aug 2011
D0900706-v3 Sensor Alignment Disc, HAM ISI Andy Stein et al. Final Design
Seismic Isolation
11 Jul 2011
D1100923-v1 Unified Plate Flipper Extension, D0902273, BSC-ISI, aLIGO Sam Barnum Assembly
Seismic Isolation
30 Jun 2011
D060328-v3 Advanced LIGO, SUS, Quad N-Ptype Top Stage, 3/8-16 UNC T NUT Based on Wixroyd 2418.W120 Joseph Odell et al. Final Design
Suspensions
21 Jun 2011
D1002410-v2 Walking Plates, BSC Chamber, Top, aLIGO Sam Barnum Seismic Isolation
Installation
17 Jun 2011
D1002926-v2 Module-E, BSC Cartridge installation, aLIGO Sam Barnum et al. Installation
Observatory Facilities
15 Jun 2011
D0902777-v2 GS-13 Pod, Vertical Assembly, aLIGO BSC-ISI Sam Barnum et al. Final Design
Seismic Isolation
15 Jun 2011
D0902485-v3 Stage1-2 Blade Spring Flexure Assem, aLIGO BSC-ISI Sam Barnum et al. Final Design
Seismic Isolation
14 Jun 2011
D1100934-v1 Unified Plate Flipper Extension, D0902279, BSC-ISI, aLIGO Sam Barnum Assembly
Seismic Isolation
02 Jun 2011
D1100932-v1 Unified Plate Flipper Extension, D0901518-19, BSC-ISI, aLIGO Sam Barnum Assembly
Seismic Isolation
02 Jun 2011
D1100922-v1 Unified Plate Flipper Extension, D0901520 , BSC-ISI, aLIGO Sam Barnum Assembly
Seismic Isolation
02 Jun 2011
D1100919-v1 Extended Unified Plate Flipper Tooling Optics Table, BSC-ISI Sam Barnum Seismic Isolation
Installation
02 Jun 2011
D1100376-v2 Unified Plate Flipper Tooling Optics Table, BSC-ISI Sam Barnum Final Design
Seismic Isolation
01 Jun 2011
D070586-v1 HAM ISI, INSTALLATION FIXTURE, aLIGO Sam Barnum et al. Seismic Isolation
Document Migration
Upgrades
Installation
31 May 2011
D0902530-v1 Stage 1-2 Horizontal Actuator Assm Sam Barnum Final Design
Seismic Isolation
27 May 2011
D0900857-v3 GS-13 Pod Assembly, aLIGO BSC-ISI Sam Barnum et al. Final Design
Seismic Isolation
10 May 2011
L0900118-v8 Advanced LIGO Preliminary Design Review of the BSC ISI system Fabrice Matichard et al. Seismic Isolation
Preliminary Design
Reviews
04 May 2011
D1100374-v2 Unified Plate Flipper Tooling Single End, BSC-ISI Sam Barnum Final Design
Seismic Isolation
21 Apr 2011
D1100375-v1 Unified Plate Flipper Tooling Double End, BSC-ISI Sam Barnum Final Design
Seismic Isolation
31 Mar 2011
D1002727-v2 Left Leg, Stand, Test, BSC-ISI+Quad + HAM-ISI, aLIGO Sam Barnum Final Design
Seismic Isolation
31 Mar 2011
D1002661-v1 Foot, Stand, Test, BSC-ISI+Quad & HAM-ISI, aLIGO Sam Barnum Final Design
Seismic Isolation
31 Mar 2011
D1002127-v2 Support Tube,Stand, Test, BSC-ISI+Quad + HAM-ISI, aLIGO Sam Barnum Final Design
Seismic Isolation
31 Mar 2011
D1002126-v2 Right Leg, Stand, Test, BSC-ISI+Quad + HAM-ISI, aLIGO Sam Barnum Final Design
Seismic Isolation
31 Mar 2011
D1002125-v3 Cross Brace, Stand, Test, BSC-ISI+Quad + HAM-ISI, aLIGO Sam Barnum Final Design
Seismic Isolation
31 Mar 2011
D050263-v3 GUSSET, TEST STAND Sam Barnum et al. Final Design
Seismic Isolation
31 Mar 2011
D1100497-v1 Convert HAM Storage Container for BSC-ISI Sam Barnum Assembly
Seismic Isolation
24 Mar 2011
D1100216-v3 Capacitive Position Sensor Test Plate, Fine + Coarse Sam Barnum Final Design
Seismic Isolation
24 Mar 2011
D1000514-v1 HEPI ASSEMBLY, HAM, aLIGO SEI Sam Barnum Final Design
Seismic Isolation
24 Mar 2011
D1100470-v2 BSC ISI to HAM Storage Containter Adapter Sam Barnum Final Design
Seismic Isolation
23 Mar 2011
D1100471-x0 BSC ISI to HAM Storage Container Conversion Sam Barnum Final Design
Seismic Isolation
23 Mar 2011
D1002314-v2 BSC ISI Stage 0 Plate Flip Bracket Hugh Radkins et al. Assembly
Seismic Isolation
10 Mar 2011
D961093-v1 Beam Splitter Chamber (BSC) Assembly, LIGO Vacuum Equipment Sam Barnum Document Migration
04 Mar 2011
D1003179-v2 aLIGO Installation, LHO Corner Station Vacuum Equipment Layout John Worden et al. Installation
28 Feb 2011
D1003180-v2 aLIGO Installation, LLO Corner Station Vacuum Equipment Layout John Worden et al. Installation
24 Feb 2011
D0902249-v3 Stage1-2 Vertical Displacement Sensor Mount Sam Barnum Final Design
Seismic Isolation
08 Feb 2011
D0902250-v2 Stage1-2 Horizontal Displacement Sensor Mount Sam Barnum Final Design
Seismic Isolation
04 Feb 2011
D0901805-v2 Stage0-1, Locker, Base Shim Spacer Sam Barnum et al. Seismic Isolation
Preliminary Design
28 Jan 2011
D0902778-v5 GS-13 Pod, Horizontal Assembly, aLIGO BSC-ISI Sam Barnum et al. Final Design
Seismic Isolation
27 Jan 2011
D1100113-v1 Mid-Station Spool-LHO John Worden et al. Installation
21 Jan 2011
D1100112-v1 Adapter A-18 Jodi Fauver et al. Installation
21 Jan 2011
D1100111-v1 Adapter A-17 John Worden et al. Installation
21 Jan 2011
D1100110-v1 Adapter A-16 John Worden et al. Installation
21 Jan 2011
D1003175-v2 aLIGO Installation, LHO Y (Left) Mid Station Vacuum Equipment Layout John Worden et al. Installation
20 Jan 2011
D1003176-v2 aLIGO Installation, LHO X (Right) Mid Station Vacuum Equipment Layout John Worden et al. Installation
20 Jan 2011
D071008-v2 Stage 0 Stiffener End Cap Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
D071180-v2 GS-13 Adapter Plate Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
D071071-v2 Rib, Tan, Flexure Mid Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
D071070-v2 Rib, Tan, Flexure Cen Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
D071069-v2 Rib, Rad, Flexure Out 2 Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
D071068-v2 Rib, Rad, Flexure Out 1 Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
D071056-v2 Rib, Rad, GS-13 Out 2 Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
D071055-v2 Rib, Rad, GS-13 Out 1 Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
D071054-v2 Rib, Rad, GS-13 Mid Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
D071053-v2 Rib, Tan, GS-13 Cen Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
D071052-v2 Rib, Tan, GS-13 Mid Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
D071007-v2 Stage 0 Stiffener Plate Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
D071006-v2 Stage 0 Stiffener Rib Andy Stein et al. Final Design
Seismic Isolation
14 Jan 2011
C1002236-v8 SOW Fabrication of aLIGO SEI Install Test Stands John Worden et al. Procurements
Installation
07 Jan 2011
D1002583-v1 Bridge Vertical Middle Post Weldment Sam Barnum et al. Final Design
Seismic Isolation
04 Jan 2011
D1002580-v1 Bridge Vertical Post Weldment Sam Barnum et al. Final Design
Seismic Isolation
04 Jan 2011
D1001461-v1 External Stand Angled Support, HAM-ISI Fixture Sam Barnum et al. Final Design
Seismic Isolation
04 Jan 2011
D1001439-v1 External Stand Horizontal Support, HAM-ISI Fixture Sam Barnum et al. Final Design
Seismic Isolation
04 Jan 2011
D1001466-v1 Middle Stand Horizontal Support, HAM-ISI Fixture Sam Barnum et al. Final Design
Seismic Isolation
04 Jan 2011
D1002798-v1 Angle, External Stand Vertical Support, HAM-ISI Fixture Sam Barnum et al. Final Design
Seismic Isolation
04 Jan 2011
D1003178-v1 aLIGO Installation, LHO X (Right) End Station Vacuum Equipment Layout John Worden et al. Installation
03 Jan 2011
D1003177-v1 aLIGO Installation, LHO Y (Left) End Station Vacuum Equipment Layout John Worden et al. Installation
03 Jan 2011
D1001366-v2 Test-Bench BSC-ISI to Test Tooling Michael Hillard Final Design
Seismic Isolation
17 Dec 2010
D071200-v4 Trim Adjustment Mass Andy Stein et al. Final Design
Seismic Isolation
13 Dec 2010
E1000654-v5 Specification for LIGO BSC Work Platforms John Worden et al. Installation
02 Dec 2010
D070591-v1 SPACER, HAM-ISI Installation Fixture Sam Barnum et al. Final Design
Seismic Isolation
Upgrades
29 Nov 2010
D070588-v1 Middle Stand, HAM-ISI, Installation Fixture Sam Barnum et al. Final Design
Seismic Isolation
29 Nov 2010
D1001462-v1 External Stand Vertical Support, HAM-ISI Fixture Sam Barnum et al. Final Design
Seismic Isolation
29 Nov 2010
D0902488-v3 Tooling Bracket, Blades Pusher Stg 0-1& Blades Puller Stg 1-2, aLIGO BSC ISI Michael Hillard Final Design
Seismic Isolation
18 Nov 2010
D1003029-v1 Work Platform Example Drawing Sam Barnum et al. Requirements
Observatory Facilities
17 Nov 2010
D050332-v2 TEST STAND ANCHOR NUT Sam Barnum et al. Final Design
Seismic Isolation
11 Nov 2010
D050331-v2 TEST STAND LEVELING FOOT THRUBOLT Sam Barnum et al. Final Design
Seismic Isolation
11 Nov 2010
D060139-v1 Bottom Half, BSC Chamber Sam Barnum Final Design
Seismic Isolation
10 Nov 2010
E1000614-v1 DCN for: HAM-ISI INSTALLATION FIXTURE Sam Barnum et al. Final Design
Seismic Isolation
21 Oct 2010
D1001465-v1 Middle Stand Vertical Support, HAM-ISI Fixture Sam Barnum et al. Final Design
Seismic Isolation
21 Oct 2010
D070587-v1 External Stand, HAM-ISI Fixture Sam Barnum et al. Final Design
Seismic Isolation
Document Migration
Upgrades
21 Oct 2010
E1000340-v1 DCN for: TEST STAND, BSC-ISI, aLIGO Sam Barnum Final Design
Seismic Isolation
19 Oct 2010
None
D0901554-v3 Actuator Post Stage 0-1, aLIGO BSC ISI Michael Hillard Final Design
Seismic Isolation
10 Sep 2010
D0902251-v3 Stage1-2 Vertical Sensor Target Mount Michael Hillard Final Design
Seismic Isolation
24 Aug 2010
D1000469-v2 Position Sensor Base, aLIGO BSC ISI Sam Barnum et al. Final Design
Seismic Isolation
23 Aug 2010
D1001925-v1 Stand, HAM Chamber Large Door Sam Barnum Final Design
Seismic Isolation
23 Aug 2010
D0900156-v1 Test Jig for Magnetic Actuators, new style actuators Sam Barnum Seismic Isolation
Basic R&D
23 Aug 2010
D0900160-v1 SEI Magnetic Actuator Test Jig Load Cell Carrier Plate Sam Barnum Seismic Isolation
Basic R&D
23 Aug 2010
D0900162-v1 SEI Magnetic Actuator Test Jig Side Link Small. Sam Barnum Seismic Isolation
Basic R&D
23 Aug 2010
D0900161-v1 SEI Magnetic Actuator Test Jig Actuator Carrier Sam Barnum Seismic Isolation
Basic R&D
23 Aug 2010
D0900159-v1 SEI Magnetic Actuator Test Jig Top Sam Barnum Seismic Isolation
Basic R&D
23 Aug 2010
D0900158-v1 SEI Magnetic Actuator Test Jig Vertical Support Sam Barnum Seismic Isolation
Basic R&D
23 Aug 2010
D0900157-v1 Base for Magnetic actuator test jig, for new style actuators Sam Barnum Seismic Isolation
Basic R&D
20 Aug 2010
D0900163-v1 SEI Magnetic Actuator Test Jig, Side Links, Large Actuator Sam Barnum Seismic Isolation
Basic R&D
20 Aug 2010
D1000642-v1 Small Vertical Actuator Assy W/Tooling, aLIGO BSC ISI Andy Stein et al. Final Design
Seismic Isolation
20 Aug 2010
D1000470-v2 Position Sensor Target, aLIGO BSC ISI Sam Barnum et al. Final Design
Seismic Isolation
20 Aug 2010
D0902356-v2 Displacement Sensor Mount, Stage 0-1, aLIGO BSC ISI Michael Hillard Final Design
Seismic Isolation
20 Aug 2010
D1001359-v3 Test-Bench Pocket Stage2 Optics Table Sam Barnum Final Design
Seismic Isolation
04 Aug 2010
D1001355-v3 Test-Bench Stage1-2 Blade spring support Sam Barnum Final Design
Seismic Isolation
04 Aug 2010
D0902252-v2 Stage1-2 Horizontal Sensor Target Mount Sam Barnum Final Design
Seismic Isolation
03 Aug 2010
D1001356-v2 Test-Bench Stage1 Support Sam Barnum Final Design
Seismic Isolation
03 Aug 2010
D1001352-v2 Test-Bench Stage1 Base Plate Sam Barnum Final Design
Seismic Isolation
03 Aug 2010
D1001360-v2 Test-Bench Stage2 Envelope Wall Sam Barnum Final Design
Seismic Isolation
03 Aug 2010
D1000472-v1 Position Sensor Target Body, aLIGO BSC ISI Sam Barnum et al. Final Design
Seismic Isolation
28 Jul 2010
D1000745-v1 Base, Lift Hook Receiver, aLIGO BSC ISI Michael Hillard Final Design
Seismic Isolation
27 Jul 2010
D0902200-v1 Top Saddle on Bracket, Stage 0-1 Blade Pusher, aLIGO BSC-ISI Sam Barnum et al. Final Design
Seismic Isolation
27 Jul 2010
D0902483-v2 Saddle on Large Blades, Stage 0-1 Blade Pusher, aLIGO BSC-ISI Sam Barnum et al. Final Design
Seismic Isolation
27 Jul 2010
D1000679-v1 Spherical Washer, 1in OD Convex, aLIGO BSC ISI Sam Barnum et al. Final Design
Seismic Isolation
26 Jul 2010
D1000678-v1 Spherical Washer, 2 in OD Convex, aLIGO BSC ISI Sam Barnum et al. Final Design
Seismic Isolation
26 Jul 2010
D0900649-v5 Trillium pod Top Hat Sam Barnum Final Design
Seismic Isolation
23 Jul 2010
D0900859-v5 GS-13 Pod Top Hat , aLIGO BSC-ISI Sam Barnum et al. Final Design
Seismic Isolation
23 Jul 2010
D047822-v6 D047822 L4C chamber baseplate Sam Barnum et al. Final Design
Seismic Isolation
23 Jul 2010
E1000268-v1 DCN For: Trillium and GS-13 Pod Tops Sam Barnum Final Design
Seismic Isolation
21 Jul 2010
D0900651-v2 Trillium 240 OBS to Pod Interposer Sam Barnum Final Design
Seismic Isolation
21 Jul 2010
D0902548-v3 Trillium Pod Loading Slider Foot Slider Sam Barnum Final Design
Seismic Isolation
21 Jul 2010
D0900858-v1 GS-13 Pod Interposer Sam Barnum et al. Final Design
Seismic Isolation
21 Jul 2010
D0902541-v2 Diaphragm, Vert GS-13, aLIGO BSC-ISI Andy Stein et al. Final Design
Seismic Isolation
21 Jul 2010
D0901819-v2 Trillium Pod Locating eccentric Sam Barnum Final Design
Seismic Isolation
21 Jul 2010
D1001364-v1 Test-Bench Leg Michael Hillard Final Design
Seismic Isolation
14 Jun 2010
D080464-v3 BSC-HAM ISI TEST STAND Assembly Sam Barnum et al. Final Design
Seismic Isolation
11 Jun 2010
D1001362-v1 Test-Bench Stage1 Support Stabilizer Sam Barnum Final Design
Seismic Isolation
11 Jun 2010
D1001361-v1 Test-Bench Support for Safety Restraint Sam Barnum Final Design
11 Jun 2010
D1001358-v1 Test-Bench Skin Stage2 Top of Optics Table Sam Barnum Final Design
Seismic Isolation
11 Jun 2010
D1001357-v1 Test-Bench Stage1 Wall Support Sam Barnum Final Design
Seismic Isolation
11 Jun 2010
D1001354-v1 Test-Bench Stage2 TopPlate Sam Barnum Final Design
Seismic Isolation
11 Jun 2010
D1001353-v1 Test-Bench Stage1 CloseOut Plate Sam Barnum Final Design
Seismic Isolation
11 Jun 2010
D1001351-v1 Test-Bench Stage0 Sam Barnum Final Design
Seismic Isolation
11 Jun 2010
D047823-v6 D047823- L4C Vacuum Chamber top Sam Barnum et al. Final Design
Seismic Isolation
08 Jun 2010
D0900860-v3 GS-13 Pod BaseFlange Sam Barnum et al. Final Design
Seismic Isolation
03 Jun 2010
D0900650-v3 Trillium 240 OBS Pod base flange Sam Barnum Final Design
Seismic Isolation
03 Jun 2010
D0901832-v2 GS-13 Horiz Stabilizer Assembly. aLIGO BSC-ISI Sam Barnum et al. Final Design
Seismic Isolation
26 May 2010
D0902800-v2 Custom Weld nut, GS13 Diaphragm, aLIGO BSC-ISI Sam Barnum et al. Final Design
Seismic Isolation
26 May 2010
D0901829-v2 GS-13 Stabilizer Plate, aLIGO BSC-ISI Sam Barnum et al. Final Design
Seismic Isolation
26 May 2010
E1000171-v2 DCN For Pod Tops and Base Flanges, Trillium, GS-13, L4C Sam Barnum Final Design
Seismic Isolation
21 May 2010
D071442-v2 Asm, Actuator Andy Stein et al. Final Design
Seismic Isolation
17 May 2010
D0902529-v1 Stage1-2 Horizontal Position Sensor Assm Sam Barnum Final Design
Seismic Isolation
04 May 2010
D1000468-v1 Position Sensor Target Assembly, aLIGO BSC ISI Sam Barnum et al. Final Design
Seismic Isolation
04 May 2010
D0902434-v1 Pin Key Small Actuator Tooling Bar Michael Hillard Final Design
Seismic Isolation
03 May 2010
D047824-v5 Clamp for L4C in pod Fabrice Matichard Final Design
Seismic Isolation
30 Apr 2010
D1000478-v1 Sensor Assembly Horizontal, aLIGO BSC ISI Sam Barnum et al. Final Design
Seismic Isolation
29 Apr 2010
D1000477-v1 Positon Sensor Assembly, aLIGO BSC ISI Sam Barnum et al. Final Design
Seismic Isolation
28 Apr 2010
D1000467-v1 Positon Sensor Assembly, aLIGO BSC ISI Sam Barnum et al. Final Design
Seismic Isolation
28 Apr 2010
D1000471-v1 Position Sensor Target Shaft, aLIGO BSC ISI Sam Barnum et al. Final Design
Seismic Isolation
28 Apr 2010
E1000096-v1 Actuator Tooling Assembly Procedure, BSC-ISI, aLIGO Sam Barnum Final Design
Seismic Isolation
30 Mar 2010
D1000716-x0 Actuator - Stage1-2 - Vertical Tooling Bracket Sam Barnum Final Design
Seismic Isolation
26 Mar 2010
D0902546-v2 Trillium Pod Loading Slider Foot Sam Barnum Final Design
Seismic Isolation
22 Mar 2010
D0902547-v2 Trillium Pod Loading Slider Foot Assem Sam Barnum Final Design
Seismic Isolation
22 Mar 2010
D0902749-x0 Large Actuator, aLIGO SEI HAM-ISI & BSC-ISI Stephany Foley et al. Final Design
Seismic Isolation
17 Mar 2010
D0901075-v4 AdLIGO SEI Bulk Trim Masses Stephany Foley et al. Final Design
Seismic Isolation
16 Mar 2010
D071464-v2 Asm, Position Sensor Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071470-v2 Asm, GS-13 with Fixtures Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071463-v2 Asm, Position Sensor Target Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071497-v2 Asm, Fixture, Actuator Set-Up Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071496-v2 Asm, Fixture, GS-13 Install Horiz Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071430-v2 Asm, Spring and Flexure Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071431-v2 Asm, Flexure Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071427-v2 Asm, Outer Wall, Small Panel Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071425-v2 Asm, Keel Wall Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071412-v2 Asm, Stage 0 Stiffener Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071424-v2 Asm, Keel Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071423-v2 Asm, Pitchfork Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D071422-v2 Asm, Boxwork Andy Stein et al. Final Design
Seismic Isolation
04 Mar 2010
D1000436-x0 Pin-Key Pin Tool, aLIGO BSC ISI Sam Barnum Final Design
Seismic Isolation
25 Feb 2010
D0902583-v1 Spacer, Horz GS-13 Stiffener, aLIGO BSC ISI Andy Stein et al. Final Design
Seismic Isolation
09 Feb 2010
D1000066-x0 Feed-Forward, L4C,Vertical Sam Barnum Final Design
Seismic Isolation
13 Jan 2010
D1000065-x0 Feed-Forward, L4C, Horizontal Sam Barnum Final Design
Seismic Isolation
13 Jan 2010
D0901318-v4 GS-13, Flexure, Bottom Sam Barnum et al. Final Design
Seismic Isolation
28 Dec 2009
D0900647-x0 Obsolete Number, Trillium 240 OBS Sam Barnum Final Design
Seismic Isolation
14 Dec 2009
T0900593-x0 Trillium OBS Pod Assembly Procedure Adv LIGO BSC ISI Stephany Foley et al. Final Design
Seismic Isolation
25 Nov 2009
T0900592-x0 GS-13 Pod Assembly Procedure for Adv LIGO BSC ISI Stephany Foley et al. Final Design
Seismic Isolation
25 Nov 2009
D0901319-v4 GS-13, Flexure, Top Sam Barnum et al. Final Design
Seismic Isolation
24 Nov 2009
D0902489-x0 L4-C Pod Top Hat Sam Barnum Final Design
Seismic Isolation
27 Oct 2009
D0902347-x0 Stage0-1 Horizontal Sensor Target Mount Sam Barnum Seismic Isolation
Preliminary Design
06 Oct 2009
D0901340-v3 Trillium 240 OBS, LIGO Version Sam Barnum Final Design
Seismic Isolation
01 Sep 2009
D0901831-x0 GS-13 Stabilizer Plate Spacer. Sam Barnum Seismic Isolation
Preliminary Design
19 Aug 2009
D0901827-x0 BSC_Weld_Nut-Custom .25-20 Thread Sam Barnum Seismic Isolation
Preliminary Design
19 Aug 2009
D0901824-x0 GS-13_Horizontal_Top_Anchor Sam Barnum Preliminary Design
19 Aug 2009
D047792-v2 HAM, GS-13, Foot, Jam nut Sam Barnum Final Design
Seismic Isolation
13 Aug 2009
D047791-v2 HAM, GS-13, Foot Sam Barnum Final Design
Seismic Isolation
13 Aug 2009
D047811-v3 HAM, GS-13, Crossbar Sam Barnum Final Design
Seismic Isolation
13 Aug 2009
D0901041-v1 HAM to BSC Test/Assembly Stand Adapter Sam Barnum Final Design
Seismic Isolation
09 Jul 2009
D071500-v1 Asm, Spring Tensioner Sam Barnum Final Design
Seismic Isolation
22 May 2009
D071075-v2 Flexure Post Bracket, Rad Andy Stein et al. Final Design
Seismic Isolation
22 May 2009
D071490-v1 Asm, Shipping Brace Sam Barnum Final Design
Seismic Isolation
22 May 2009
D071251-v2 Gang Barrel Nut Andy Stein et al. Final Design
Seismic Isolation
22 May 2009
D071255-v2 Wiring Breadboard, Large Sam Barnum Final Design
Seismic Isolation
22 May 2009
D071421-v1 Asm, Stage 1 Pre-Asm Sam Barnum Final Design
Seismic Isolation
22 May 2009
D071480-v1 ASM, Adjustment Masses Sam Barnum Final Design
Seismic Isolation
22 May 2009
D0900277-v1 Cover, Outer Wall, Horiz Act and Sens Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D0900338-v1 Brace, Horiz GS-13 Shelf, HAM ISI Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D0900337-v1 Mounting Bar, Horiz GS-13 Shelf, HAM ISI Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D0900336-v1 Plate, Horiz GS-13 Shelf, HAM ISI Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D0900318-v1 Bracket Base, Horz L4-C, HAM ISI Andy Stein et al. Seismic Isolation
Preliminary Design
11 May 2009
D0900320-v1 Gusset, Horz L4-C, HAM ISI Andy Stein et al. Seismic Isolation
Preliminary Design
11 May 2009
D0900319-v1 Mount Plate, Horz L4-C, HAM ISI Andy Stein et al. Seismic Isolation
Preliminary Design
11 May 2009
D071183-v2 GS-13 Cable Restraint Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071201-v2 Mass Spacer Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071182-v2 Weld Nut, Custom Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071181-v2 GS-13 Stabilizer Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071167-v2 Sensor Target Post Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071166-v2 Sensor Target Body Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071163-v2 Sensor Head Mount Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071175-v2 Semsor Head Bracket, Vert Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071162-v2 Sensor Head Washer Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071164-v2 Sensor Head Base Plate Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071170-v2 Sensor Head Standoff, Horiz Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071076-v2 Flexure Post Bracket, Tan Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071074-v2 Flexure Post Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071250-v2 Barrel Nut Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071060-v2 Outer Wall, Bracket 120 Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071073-v2 Rib Bracket, 60 Deg Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071059-v2 Outer Wall, Small Panel Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071061-v2 Outer Wall, Bracket 90 Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071009-v2 Particle Fence Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071005-v2 Support Post Gusset, Main Andy Stein et al. Final Design
Seismic Isolation
11 May 2009
D071004-v2 Support Post Gusset, Aux Sam Barnum et al. Final Design
Seismic Isolation
11 May 2009
D071003-v2 Support Post Cap Andy Stein et al. Final Design
Seismic Isolation
08 May 2009
D071471-v2 Asm, Stabilizer, GS-13 Andy Stein et al. Final Design
Seismic Isolation
07 May 2009
D071499-v2 Asm, Spring Tension Screw Andy Stein et al. Final Design
Seismic Isolation
07 May 2009
D071002-v2 Support Post Andy Stein et al. Final Design
Seismic Isolation
04 May 2009

Number of documents found: 385

DCC Version 3.2.2, contact Document Database Administrators