| LIGO-Number |
Title |
Author(s) |
Topic(s) |
Last Updated |
| D1500163-v3 |
Annular End Reaction Mass (AERM) |
Eduardo Sanchez et al. |
Basic R&D
System Engineering
|
18 Sep 2015 |
| D1800190-v1 |
IO, EOM, Rotatable Block |
Eduardo Sanchez |
Input Optics
Fabrication
|
04 Dec 2024 |
| D1800172-v4 |
IO, EOM ASSY., LAYOUT |
Eduardo Sanchez |
Fabrication
|
04 Dec 2024 |
| D1101775-v10 |
aLIGO, ELECTRICAL FEEDTHROUGH TYPES, and TYPICAL SUBFLANGES |
Eduardo Sanchez |
Installation
System Engineering
Integration
|
02 Dec 2024 |
| D0901812-v1 |
AdvLIGO VE HAM6-L1 Vacuum Equipment Assembly |
Jose Eduardo Chavez |
System Engineering
Final Design
|
10 Sep 2019 |
| D1800027-v26 |
Top Level Conceptual Layout of A+ |
Calum Torrie et al. |
A+
Operations
System Engineering
|
02 Dec 2021 |
| D1003318-v3 |
ISC Fast Shutter Mechanical Assembly |
Jason Fishner et al. |
Final Design
Sensing and Control
|
25 Feb 2015 |
| D1002890-v8 |
Flange Layout – L1 Horizontal Access Module 6 (HAM 6) |
Emery Brown et al. |
Preliminary Design
System Engineering
|
16 Dec 2015 |
| D1400138-v5 |
Vac. Sys., 48 CYL. (LIGO Operations R&D) |
Eduardo Sanchez |
System Engineering
Fabrication
|
12 Sep 2014 |
| D1002872-v9 |
Flange Layout - H1 Horizontal Access Module1 (HAM 1) |
Emery Brown et al. |
System Engineering
Preliminary Design
|
27 Sep 2024 |
| D0900520-v13 |
aLIGO Systems, LHAM3-L1 Top Level Chamber Assembly |
Ignacio Romero et al. |
System Engineering
Final Design
|
24 May 2016 |
| D0900456-v13 |
aLIGO Systems, HAM5-L1 Top Level Chamber Assembly |
Ignacio Romero et al. |
Final Design
System Engineering
|
23 Jan 2014 |
| D0901182-v1 |
aLIGO, SEI, BSC-ISI, Top Assembly |
Stephany Foley et al. |
Final Design
Seismic Isolation
|
30 Aug 2024 |
| D2300135-v4 |
SPECIFICATION CONTROL DRAWING: LIGO, VE, COMFORMANT VIEWPORTS. |
Madeline Lesovsky et al. |
Fabrication
Vacuum
System Engineering
|
27 Aug 2024 |
| D0900623-v16 |
Output Faraday Isolator Suspended Bench (OFI, OFIS, Table) Assembly |
Eduardo Sanchez |
Basic R&D
Auxiliary Optics
|
17 Jul 2024 |
| D060218-v2 |
BOSEM |
Betsy Weaver et al. |
Suspensions
Preliminary Design
|
28 Jul 2020 |
| D0901880-v5 |
aLIGO AOS SUS Transmission Monitor System (TMS, TMTS) Assembly |
Calum Torrie et al. |
Auxiliary Optics
Final Design
|
09 Jul 2024 |
| D0901464-v6 |
aLIGO Systems Layout LLO Y-End Station |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
11 Oct 2016 |
| D0901085-v1 |
AdvLIGO SEI HAM2-H1, ISOLATION TABLE TOP LEVEL ASSY. |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
26 Jun 2024 |
| D0900365-v14 |
aLIGO Systems, LHAM2-L1 Top Level Chamber Assembly |
Ignacio Romero et al. |
System Engineering
Final Design
|
21 Apr 2016 |
| D0901094-v7 |
aLIGO Systems, HAM3-H1 Top Level Chamber Assembly |
Jose Eduardo Chavez |
System Engineering
Final Design
|
26 Apr 2012 |
| D1101059-v5 |
ALIGO IO PSL ISS PD ASSEMBLY (ISS Second Loop PD Array) |
Eduardo Sanchez et al. |
Input Optics
Final Design
|
14 May 2024 |
| D1900111-v2 |
A+, VE, H1/L1 OUTPUT SEPTUM PLATE |
Eduardo Sanchez |
Fabrication
Procurements
Vacuum
|
16 Aug 2019 |
| D071165-v2 |
Sensor Target |
Andy Stein et al. |
Final Design
Seismic Isolation
|
11 May 2009 |
| D0900492-v5 |
aLIGO Systems, BSC3-L1 Top Level Chamber Assembly |
Ignacio Romero |
System Engineering
Final Design
|
12 Jul 2012 |
| D1201273-v3 |
OMC DCPD Mount Assembly |
Jeffrey Lewis et al. |
Sensing and Control
|
08 Nov 2022 |
| D1900377-v7 |
aLIGO RF BOX Faraday Cage (GENERAL PURPOSE) |
Eduardo Sanchez |
Fabrication
|
04 Apr 2024 |
| D0901822-v11 |
aLIGO Systems, HAM6-H1 Top Level Chamber Assembly |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
07 Mar 2024 |
| D1201439-v4 |
aLIGO OMC Breadboard Assembly Layout |
Jeffrey Lewis et al. |
Sensing and Control
|
22 Jul 2021 |
| D1000313-v12 |
ISC HAM1 Assembly |
Lisa Barsotti et al. |
Sensing and Control
Assembly
|
11 Feb 2015 |
| D0901346-v2 |
Advanced LIGO Quadruple Suspension |
Joe ODell et al. |
Suspensions
Final Design
|
23 Apr 2010 |
| D0901811-v10 |
aLIGO Systems, HAM6-L1 Top Level Chamber Assembly |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
27 Feb 2015 |
| D2300446-v1 |
Mode Cleaner Tube Baffle, Mount Standoff Spacer KIT (7.5 PITCH/YAW) |
Eduardo Sanchez |
Fabrication
|
14 Dec 2023 |
| D0900428-v8 |
aLIGO Systems, LBSC2-L1 Top Level Chamber Assembly |
Eduardo Sanchez et al. |
Final Design
System Engineering
|
04 Dec 2023 |
| D1101085-v4 |
aLIGO TCS HWS OPTICS ASSEMBLY, H1 HAM4 |
Aidan Brooks et al. |
Final Design
Auxiliary Optics
Vacuum
|
16 Jul 2014 |
| D1101083-v2 |
aLIGO TCS HWS in-vacuum Opto Mechanical Layout, ITMX, H1, Assembly |
Aidan Brooks et al. |
Vacuum
Auxiliary Optics
Final Design
|
29 Jul 2014 |
| D1101847-v5 |
aLIGO TCS HWS OPTO MECHANICAL LAYOUT, ITMX, L1 |
Aidan Brooks et al. |
System Engineering
Vacuum
Auxiliary Optics
Preliminary Design
Integration
Final Design
Fabrication
|
23 Oct 2019 |
| D1101846-v1 |
aLIGO TCS HWS Optics Assembly In Vacuum, L1 HAM4 |
Aidan Brooks et al. |
Fabrication
Vacuum
System Engineering
Auxiliary Optics
Integration
Preliminary Design
Final Design
|
24 May 2012 |
| D1101848-v1 |
aLIGO TCS HWS OPTO MECHANICAL LAYOUT, ITMY, L1 |
Aidan Brooks et al. |
Fabrication
Preliminary Design
Integration
Final Design
System Engineering
Vacuum
Auxiliary Optics
|
03 May 2012 |
| D1400220-v1 |
aLIGO, SUS, HSTS, MIDDLE MASS BLADE |
Harrison Miller et al. |
Fabrication
|
27 Apr 2015 |
| D0901083-v12 |
aLIGO Systems, HAM2-H1 Top Level Chamber Assembly |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
22 Oct 2019 |
| D1102365-v4 |
aLIGO TMS Telescope Secondary Mirror Assembly |
Craig Conley et al. |
Final Design
Auxiliary Optics
|
22 Mar 2013 |
| D1200244-v3 |
aLIGO TMS F1 Mirror Assembly |
Craig Conley et al. |
Final Design
Auxiliary Optics
|
09 Oct 2012 |
| D1200243-v5 |
aLIGO TMS F2 Mirror Assembly |
Craig Conley et al. |
Auxiliary Optics
Final Design
|
17 Jun 2013 |
| D2300194-v1 |
aLIGO PSL PD HOUSING ASSY., CLAMP |
Eduardo Sanchez et al. |
Laser Systems
Fabrication
|
07 Aug 2023 |
| D2300199-v1 |
aLIGO PSL PD HOUSING ASSY., COVER (BACK) |
Eduardo Sanchez et al. |
Fabrication
Laser Systems
|
07 Aug 2023 |
| D071462-v2 |
Asm, Position Sensor Target Face |
Andy Stein et al. |
Seismic Isolation
Final Design
|
03 Aug 2023 |
| D1700361-v3 |
Layout of SLC Baffles with new 2017 SLiC Baffles |
Eduardo Sanchez et al. |
Integration
System Engineering
|
22 Jun 2023 |
| D1500241-v3 |
COC, AERM VACUUM PLATE, ERGO ARM |
Eduardo Sanchez |
Fabrication
|
28 Sep 2015 |
| D1800151-v1 |
aLIGO, AOS, SLIC, BEAM DUMP ASSY. KIT, Optical Pedestal |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
12 Jun 2023 |
| D1002544-v4 |
aLIGO TCS Simplified Ring Heater Element Connector, Right |
Mindy Jacobson |
Final Design
Auxiliary Optics
Vacuum
Fabrication
|
31 Jan 2011 |
| D1002543-v4 |
aLIGO TCS Simplified Ring Heater Element Connector, Left |
Mindy Jacobson |
Fabrication
Final Design
Auxiliary Optics
Vacuum
|
31 Jan 2011 |
| Q2300018-v1 |
Waiver: Exceptions to E0900048 for fabrication of custom ported spool |
Eduardo Sanchez et al. |
System Engineering
A+
|
26 May 2023 |
| D1201279-v3 |
OMC QPD Mount Assembly |
Jeffrey Lewis et al. |
Sensing and Control
|
31 Mar 2015 |
| D0900295-v8 |
aLIGO OMCS Overall Assembly |
Derek Bridges |
Final Design
Suspensions
|
02 Oct 2019 |
| D1101939-v9 |
ALIGO, AOS, VIEWPORT LEAK TEST FIXTURE ASSY. |
Eduardo Sanchez |
Fabrication
Final Design
Auxiliary Optics
|
18 Mar 2013 |
| D1201071-v2 |
AdvLIGO BSC5-L1 ISI Table, Payload & Suspended Mass Assembly |
Jose Eduardo Chavez et al. |
Final Design
System Engineering
|
14 Jun 2016 |
| D0902823-v3 |
ADVANCED LIGO ETM PEN MASS OPTICS WITH PRISMS AND EARS ASSEMBLY |
Kurt Buckland et al. |
System Engineering
|
16 Sep 2022 |
| G1602132-v1 |
CAD Camera Views from ETM for scatter evaluation |
Eduardo Sanchez et al. |
Auxiliary Optics
System Engineering
|
12 Apr 2017 |
| D1002522-v7 |
CUSTOM CABLE SPECIFICATION V25G-TBD V-DB25 M/S1-TBD-uD25 F/S1 |
Jay Heefner et al. |
Suspensions
Fabrication
|
24 Jul 2012 |
| D2200025-v1 |
A+, OFI, LENS CAP |
Eduardo Sanchez et al. |
A+
Fabrication
|
28 Mar 2022 |
| D1900116-v9 |
A+, HAM7, Flange Layout – H1 Horizontal Access Module 7 |
Eduardo Sanchez |
A+
Preliminary Design
System Engineering
|
04 Aug 2021 |
| D1700165-v5 |
aLIGO, PCAL-VIDEO CAM, PERISCOPE SHIELD (OUTER PANEL) |
Eduardo Sanchez |
System Engineering
Fabrication
|
01 Mar 2022 |
| D1900456-v7 |
A+ FC TUBE LAYOUT |
Don Griffith |
A+
|
26 Aug 2020 |
| D1101654-v6 |
Custom Cable V25T-40, Dual QPD cable |
Rich Abbott et al. |
Fabrication
Sensing and Control
|
19 Jan 2022 |
| D1300077-v3 |
AdvLIGO SUS HAM6-L1, XYZ Local CS for Output Mode Cleaner Suspension (OMC) |
Jose Eduardo Chavez |
System Engineering
Final Design
|
24 Jul 2015 |
| D080367-v6 |
VIEWPORT GUARD ASSEMBLY |
Michael Meyer et al. |
Auxiliary Optics
Vacuum
Final Design
Observatory Facilities
|
23 Sep 2021 |
| D1201285-v1 |
OMC V Baffle Assembly |
Jeffrey Lewis |
Sensing and Control
|
14 Jul 2014 |
| D1600487-v1 |
aLIGO, PCAL, INTEGRATING SPHERE BASE |
Eduardo Sanchez |
Fabrication
|
17 Aug 2021 |
| D2000064-v1 |
aLIGO, PCAL, PHOTODETECTOR SPACER |
Eduardo Sanchez |
Fabrication
System Engineering
|
17 Aug 2021 |
| D0900421-v10 |
aLIGO Systems, HAM4-L1 Top Level Chamber Assembly |
Jose Eduardo Chavez et al. |
Final Design
System Engineering
|
01 Apr 2016 |
| D1800103-v5 |
aLIGO, AOS, SLiC, OFI SHROUD |
Alena Ananyeva et al. |
System Engineering
Suspensions
Fabrication
|
12 Jun 2018 |
| D1200047-v3 |
aLIGO SUS L1 H1 HAM5 AOS-FI PRE INSTALLATION PLATE |
Sam Barnum et al. |
Final Design
Installation
Suspensions
|
18 Sep 2013 |
| D2000591-v1 |
A+, VAC., HAM5/7 Relay Tube CAD Data |
Eduardo Sanchez |
A+
|
19 Nov 2020 |
| D1800220-v1 |
aLIGO, Picomotor, Clamping Two-Piece Shaft Collar (Altered) |
Eduardo Sanchez |
Fabrication
System Engineering
|
05 Oct 2020 |
| D1600270-v2 |
aLIGO, PSL, PreMode Cleaner, SPACER ASSY. |
Eduardo Sanchez et al. |
Fabrication
|
05 Dec 2016 |
| D1500078-v12 |
aLIGO, SYS, TMDS GAS DELIVERY SYSTEM |
Eduardo Sanchez |
Fabrication
System Engineering
|
20 Jan 2017 |
| D2000370-v2 |
A+, SYS, FIXED/GATED SUPPORT LOCATIONS |
Eduardo Sanchez |
A+
|
24 Jul 2020 |
| D1900061-v2 |
A+, SITE LAYOUT, L1 |
Eduardo Sanchez |
A+
|
04 Mar 2020 |
| D1900145-v9 |
aLIGO, NCAL, PLATFORM ASSY. |
Eduardo Sanchez |
System Engineering
Fabrication
|
23 Jul 2019 |
| D1002460-v6 |
aLIGO TMS Telescope Assembly |
Craig Conley et al. |
Auxiliary Optics
|
19 Jul 2013 |
| D1900117-v6 |
A+, BSC3, 60.5in DOOR (TYPE I) |
Eduardo Sanchez |
Vacuum
System Engineering
Fabrication
|
20 Feb 2020 |
| D1900118-v6 |
A+, BSC3, 60.5in DOOR (TYPE II) |
Eduardo Sanchez |
System Engineering
Vacuum
Fabrication
|
20 Feb 2020 |
| D1100676-v1 |
aLIGO PSL mount for FSS EOM and AOM |
Patrick Kwee et al. |
Final Design
Laser Systems
|
21 Sep 2016 |
| D0901465-v6 |
aLIGO Systems Layout LLO X-End Station |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
05 Sep 2019 |
| D1900247-v3 |
LIGO, NCAL, MT. PLATFORM ASSY., PLATFORM |
Krishna Venkateswara et al. |
Fabrication
System Engineering
Calibration
|
18 Jul 2019 |
| D1900246-v2 |
LIGO, NCAL, MT. PLATFORM ASSY., HEPI SUPPORT |
Krishna Venkateswara et al. |
Calibration
System Engineering
Fabrication
|
18 Jul 2019 |
| D1900242-v4 |
LIGO, NCAL, MT. PLATFORM ASSY., LEG |
Krishna Venkateswara et al. |
Calibration
System Engineering
Fabrication
|
31 Jul 2019 |
| D1900243-v7 |
LIGO, NCAL, MT. PLATFORM ASSY., PIER BASE |
Krishna Venkateswara et al. |
System Engineering
Calibration
Fabrication
|
31 Jul 2019 |
| D1900241-v2 |
LIGO, NCAL, MT. PLATFORM ASSY., RIGHT-ANGLE ADAPTER |
Krishna Venkateswara et al. |
System Engineering
Calibration
Fabrication
|
18 Jul 2019 |
| D1900171-v1 |
aligo, PSL, EOM/AOM Assembly |
Eduardo Sanchez |
Fabrication
|
06 Aug 2019 |
| D1900245-v1 |
LIGO, NCAL, MT. PLATFORM ASSY., SUPPORT BRACKET |
Krishna Venkateswara et al. |
Fabrication
System Engineering
Calibration
|
18 Jul 2019 |
| D1900244-v3 |
LIGO, NCAL, MT. PLATFORM ASSY., MT. POST |
Krishna Venkateswara et al. |
Fabrication
System Engineering
Calibration
|
18 Jul 2019 |
| D1001504-v5 |
aLIGO SUS ETM ITM Monolithic Assembly_Fibre Cartridge Assembly |
Russell Jones et al. |
Assembly
Suspensions
Fabrication
|
09 Jul 2019 |
| D1900133-v2 |
A+, LAND USE PERMIT BOUNDARY MAP |
Eduardo Sanchez |
System Engineering
A+
|
08 May 2019 |
| D1900069-v6 |
A+, GENERAL ARRANGEMENT DRAWING (H1) |
Eduardo Sanchez |
A+
|
10 Apr 2019 |
| D1900031-v2 |
Mask for aLIGO CO2P "playing card" direction/orientation guide |
Aidan Brooks et al. |
Auxiliary Optics
|
31 Jan 2019 |
| D1900030-v2 |
Custom mask for aLIGO CO2P H1-ITMY for O3 (to counter point absorbers) |
Aidan Brooks et al. |
Auxiliary Optics
|
31 Jan 2019 |
| D1101410-v5 |
aLIGO IO HAM2-L1, XYZ Local CS for IO PSL PD Assembly (ISS Second Loop PD Array) |
Timothy MacDonald et al. |
System Engineering
|
09 Jan 2019 |
| D1102361-v7 |
aLIGO TMS Telescope Frame Assembly |
Craig Conley et al. |
Auxiliary Optics
Final Design
|
02 Aug 2013 |
| D1600227-v11 |
aLIGO, PSL, PreMode Cleaner Body |
Eduardo Sanchez |
Fabrication
|
19 Nov 2018 |
| D1600246-v2 |
aLIGO, PSL, PreMode Cleaner, TEMP SENSOR CLAMP |
Eduardo Sanchez |
Fabrication
|
19 Nov 2018 |
| D1700031-v3 |
aLIGO, PSL, PreMode Cleaner, INPUT/OUTPUT END COVER |
Eduardo Sanchez |
Fabrication
|
19 Nov 2018 |
| D1700065-v4 |
aLIGO, PSL, PreMode Cleaner, KINEMATIC PEDESTAL (INPUT) |
Eduardo Sanchez |
Fabrication
|
19 Nov 2018 |
| D1700066-v4 |
aLIGO, PSL, PreMode Cleaner, KINEMATIC PEDESTAL (OUTPUT) |
Eduardo Sanchez |
Fabrication
|
19 Nov 2018 |
| D1700069-v3 |
aLIGO, PSL, PreMode Cleaner, Alignment Flag Assy. |
Eduardo Sanchez |
Fabrication
|
19 Nov 2018 |
| D1700071-v1 |
aLIGO, PSL, PreMode Cleaner, Beam block Port Cover |
Eduardo Sanchez |
Fabrication
|
19 Nov 2018 |
| D1700101-v2 |
aLIGO, PSL, PreMode Cleaner, STRAIN RELIEF CLAMP |
Eduardo Sanchez |
Fabrication
|
19 Nov 2018 |
| D1700102-v2 |
aLIGO, PSL, PreMode Cleaner, 1/4-20 SHOULDER SCREW (TIGHT TOL) |
Eduardo Sanchez |
Fabrication
|
19 Nov 2018 |
| D1600243-v4 |
aLIGO, PSL, PreMode Cleaner, 1" Mirror Assembly |
Eduardo Sanchez et al. |
Fabrication
|
19 Nov 2018 |
| D1600233-v3 |
aLIGO, PSL, PreMode Cleaner, 1in. Mirror MT. |
Eduardo Sanchez |
Fabrication
|
19 Nov 2018 |
| D1100821-v2 |
ALIGO MANIFOLD-CRYO BAFFLE LOWER CU PLATE |
Heidy Kelman |
Auxiliary Optics
Basic R&D
|
28 Jan 2013 |
| D0901125-v9 |
aLIGO Systems, HAM4-H1 Top Level Chamber Assembly |
Jose Eduardo Chavez et al. |
Final Design
System Engineering
|
31 Oct 2018 |
| T1600060-v5 |
Resonances & jitter suppression observation on the PZT-actuated steering mirrors of the PSL/IO Periscope |
Alena Ananyeva et al. |
Assembly
Reports
Input Optics
Other data analysis
|
29 Aug 2018 |
| E1400363-x0 |
Collection of Documents associated with cleaning optics for advanced LIGO |
Calum Torrie et al. |
Core Optics
System Engineering
|
01 Aug 2018 |
| D0901477-v6 |
aLIGO HANFORD SYSTEMS LAYOUT |
Calum Torrie et al. |
System Engineering
Final Design
|
12 Apr 2017 |
| E1800121-v2 |
Zemax model of OFI bench for input to OFI shroud analysis / design - 1st and 2nd order ghost beams |
Calum Torrie et al. |
System Engineering
Operations
|
12 Jun 2018 |
| D1700365-v8 |
aLIGO, SYS, ELECTRIC FIELD METER ASSY. |
Eduardo Sanchez |
System Engineering
Fabrication
|
23 May 2018 |
| D1800154-v2 |
Drawing - 100 mm Crystalline coating demonstration |
GariLynn Billingsley et al. |
Core Optics
Basic R&D
|
07 Jun 2018 |
| D1100640-v2 |
AdvLIGO HAM Optics Table Dog Clamp SOS Suspensions |
Jose Eduardo Chavez et al. |
Input Optics
Installation
System Engineering
Final Design
|
06 Mar 2013 |
| D0900445-v7 |
AdvLIGO SUS BSC1-L1, XYZ Local CS for ITMY |
Jose Eduardo Chavez et al. |
Final Design
System Engineering
|
11 May 2018 |
| D1600325-v3 |
Figure Metrology, 150mm Optic Adapter |
Eduardo Sanchez |
Fabrication
|
03 May 2018 |
| T1400713-v3 |
Test Mass Discharge System (TMDS): Design Document |
Eduardo Sanchez et al. |
System Engineering
Vacuum
Final Design
|
25 Apr 2018 |
| D1800032-v3 |
ELECTRIC FIELD METER ASSY, HIGH POWER FEEDTHROUGH |
Eduardo Sanchez |
System Engineering
Fabrication
|
20 Mar 2018 |
| D1600431-v2 |
aLIGO, SINGLE CHEVRON UV BAFFLE ASSY. |
Eduardo Sanchez |
Fabrication
System Engineering
|
30 Nov 2016 |
| D1600409-v2 |
aLIGO, VE, Chevron UV Baffle, Louver Cell |
Eduardo Sanchez |
Fabrication
System Engineering
Vacuum
|
30 Nov 2016 |
| E1200345-v3 |
Schnupp Effect: ETM /ITM MECHANICAL CLEARANCES & COOKIE CUTTER 'BLANK' FEASIBILITY |
Eduardo Sanchez et al. |
Preliminary Design
System Engineering
|
15 Mar 2018 |
| D1800054-v1 |
ELECTRIC FIELD METER ASSY, 4.50" CF FLANGE (BOTTOM) |
Eduardo Sanchez |
Fabrication
System Engineering
|
28 Feb 2018 |
| D1800043-v1 |
ELECTRIC FIELD METER ASSY, POWER/DRIVER FEEDTHROUGH |
Eduardo Sanchez |
Fabrication
System Engineering
|
27 Feb 2018 |
| D1800030-v1 |
ELECTRIC FIELD METER VAC. ENCLOSURE, BODY |
Eduardo Sanchez |
System Engineering
Fabrication
|
09 Feb 2018 |
| D1800031-v1 |
ELECTRIC FIELD METER VAC. ENCLOSURE, LID |
Eduardo Sanchez |
System Engineering
Fabrication
|
09 Feb 2018 |
| D1600453-v5 |
P-Cal Periscope Shield Top Level Assembly Concept Images |
Calum Torrie et al. |
System Engineering
|
30 Jan 2018 |
| D1300146-v7 |
HAM Storage Container Conversion, 3rd IFO |
Sam Barnum et al. |
Installation
Suspensions
Final Design
System Engineering
|
25 Jan 2018 |
| D1101385-v3 |
India1-MC3 Optic Assembly |
Janeen Romie et al. |
Suspensions
Integration
|
23 Jan 2018 |
| D1101383-v3 |
India1-MC1 Optic Assembly |
Janeen Romie et al. |
Suspensions
Integration
|
23 Jan 2018 |
| D1101365-v2 |
L1-MC1 Optic Assembly |
Janeen Romie et al. |
Integration
Suspensions
|
23 Jan 2018 |
| D1101367-v2 |
L1-MC3 Optic Assembly |
Janeen Romie et al. |
Suspensions
Installation
|
23 Jan 2018 |
| D1101376-v2 |
H1-MC3 Optic Assembly |
Janeen Romie et al. |
Integration
Suspensions
|
23 Jan 2018 |
| D1600407-v2 |
aLIGO, VE, Chevron UV Baffle, LOUVER HOLDER |
Eduardo Sanchez |
Fabrication
Vacuum
System Engineering
|
30 Nov 2016 |
| D1600408-v2 |
aLIGO, VE, Chevron UV Baffle, LOUVER CLAMP |
Eduardo Sanchez |
System Engineering
Vacuum
Fabrication
|
30 Nov 2016 |
| D0900615-v5 |
Faraday Isolator Prism Mounting Assy-RH |
Niem Nguyen et al. |
Auxiliary Optics
Assembly
|
15 Nov 2012 |
| D1003301-v9 |
AdLIGO AOS SR2 Scraper Baffle Skin |
Manuel Ruiz et al. |
Assembly
Auxiliary Optics
|
06 Dec 2017 |
| D1003349-v2 |
AdLIGO AOS SR2 Scraper Baffle Clamped Assy, L1 |
Manuel Ruiz |
Auxiliary Optics
Assembly
|
21 Jan 2016 |
| D1200697-v5 |
AdvLIGO IO HAM2-H1, XYZ Local CS for IO PSL PD Assembly (ISS Second Loop PD Array) |
Jose Eduardo Chavez et al. |
Final Design
System Engineering
|
20 Oct 2017 |
| D1600406-v2 |
aLIGO, VE, CHEVRON UV BAFFLE, LOUVER 14 Ga., 304 SSTL |
Eduardo Sanchez |
System Engineering
Vacuum
Fabrication
|
30 Nov 2016 |
| D1300043-v3 |
ALIGO, SUS, HLTS STRUCTURE, FC SPRAY GUARD ASSY. |
Eduardo Sanchez |
Installation
Fabrication
System Engineering
|
04 Sep 2014 |
| D1300020-v3 |
ALIGO, SUS, HSTS STRUCTURE, FC SPRAY GUARD ASSY. |
Eduardo Sanchez |
Integration
System Engineering
Installation
Fabrication
|
04 Sep 2014 |
| D0902845-v5 |
Faraday Isolator Refl Baffle |
Manuel Ruiz et al. |
Basic R&D
Auxiliary Optics
|
18 Oct 2012 |
| D1700164-v1 |
aLIGO, PCAL-VIDEO CAM, PERISCOPE SHIELD (INNER PANEL) |
Eduardo Sanchez |
System Engineering
Fabrication
|
11 Apr 2017 |
| D1100366-v2 |
AdLIGO AOS Spacer, Scraper Baffle, L1 |
Manuel Ruiz |
Assembly
Auxiliary Optics
|
17 May 2012 |
| D1002171-v2 |
AdvLIGO SEI HAM3-H1, XYZ Local CS for IO Optic Mounts Components |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
22 Jun 2017 |
| D1101128-v3 |
aLIGO, SUS, QUAD UI MASS, MAIN CHAIN |
Michael Hillard et al. |
Suspensions
Final Design
|
28 Mar 2016 |
| D1500239-v4 |
BS Actuators & Elliptical Baffle interface |
Eduardo Sanchez et al. |
Fabrication
Suspensions
|
04 May 2017 |
| D1600347-v1 |
aLIGO, VE, ACTUATOR ASSEMBLY G44E |
Eduardo Sanchez |
Fabrication
System Engineering
Vacuum
|
11 Apr 2017 |
| D1101463-v7 |
CABLE HARNESS ROUTING CONFIGURATION, HAM 3 |
Eduardo Sanchez |
Integration
Preliminary Design
Installation
Conceptual Design
|
10 Apr 2017 |
| D1500305-v5 |
CHEVRON UV BAFFLE ASSEMBLY (4 LAYER) CONCEPT |
Eduardo Sanchez |
Basic R&D
System Engineering
|
18 Jan 2017 |
| D1500228-v1 |
QUAD, SUS, BOUNCE and ROLL MODE DAMPER (BRD) |
Eduardo Sanchez |
Suspensions
Fabrication
|
20 Oct 2015 |
| D1600297-v1 |
aLIGO, PSL, PreMode Cleaner |
Eduardo Sanchez |
Fabrication
|
11 Nov 2016 |
| D1000760-v4 |
Advanced LIGO SUS ITM Production Monolithic Assembly |
Russell Jones et al. |
Suspensions
Assembly
Final Design
|
19 Jul 2016 |
| D1000759-v3 |
Advanced LIGO SUS ETM Production Monolithic Assembly |
Russell Jones et al. |
Suspensions
Assembly
Final Design
|
12 Jul 2016 |
| D1101429-v4 |
ALIGO, BSC FLOORING ORIENTATION DETAILS |
Eduardo Sanchez |
Installation
Integration
|
14 Jun 2016 |
| D1200111-v2 |
CABLE HARNESS ROUTING CONFIGURATION, LBSC5 / WBSC10 |
Eduardo Sanchez |
Integration
Preliminary Design
System Engineering
|
14 Jun 2016 |
| D0900507-v3 |
AdvLIGO VE BSC5-L1, Vaccuum Equipment Assembly |
Jose Eduardo Chavez et al. |
Final Design
System Engineering
|
14 Jun 2016 |
| D1600003-v7 |
aLIGO, HAM4, SR2 SCRAPER BAFFLE, BK GLASS OVERLAY |
Eduardo Sanchez |
System Engineering
Suspensions
Fabrication
|
10 May 2016 |
| D1500428-v4 |
aLIGO, SUS, PENRE ETM QUAD, HEAVY OSEM CAN BODY |
Eduardo Sanchez |
Fabrication
Suspensions
|
09 May 2016 |
| D1300031-v3 |
ALIGO, SUS, BS STRUCTURE, FC SPRAY GUARD ASSY. |
Eduardo Sanchez |
Fabrication
System Engineering
Integration
Final Design
|
02 May 2016 |
| D1200490-v6 |
ALIGO, COC, ETM/ITM FC SPRAY GUARD ASSY. |
Eduardo Sanchez |
Preliminary Design
|
29 Apr 2016 |
| D060341-v11 |
ADVANCED LIGO, SUS, QUAD, PENULTIMATE REACTION MASS, ETM AND ITM CONFIGURATION |
Joe ODell et al. |
Suspensions
|
13 Apr 2016 |
| D1200953-v3 |
Periscope Assembly, In Air, aLIGO TCS CO2 Laser Projection Table, H1, L1 |
Mindy Jacobson et al. |
System Engineering
Auxiliary Optics
Fabrication
Assembly
|
08 Apr 2016 |
| D1101627-v4 |
Viewport Enclosure Assembly, H1-L1 CO2P TCS |
Aidan Brooks et al. |
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
|
07 Apr 2016 |
| D080166-v9 |
aLIGO, SUS, PENRE QUAD, OSEM CAN ETM / ITM |
Joe ODell et al. |
Suspensions
|
06 Apr 2016 |
| D060375-v7 |
Advanced LIGO, SUS, Quad N-Ptype, UI MASS Main and Reaction Assembly Drawing and Process |
Joe ODell et al. |
Suspensions
|
29 Mar 2016 |
| D1400298-v3 |
aLIGO, SUS, NON-MAGNETIC BLADE DAMPER ASSY. |
Eduardo Sanchez |
Suspensions
Fabrication
|
04 Sep 2015 |
| D1600076-v1 |
aLIGO, PSL, ISS PD ARRAY, PD MT. PLATE |
Eduardo Sanchez |
Fabrication
|
19 Feb 2016 |
| E1600053-x0 |
DCN, Initial release of aLIGO, PSL, ISS PD ARRAY, TARGET PLATE -N- PD MT. PLATE |
Eduardo Sanchez |
Fabrication
|
19 Feb 2016 |
| D1600075-v1 |
aLIGO, PSL, ISS PD ARRAY, TARGET PLATE |
Eduardo Sanchez |
Fabrication
|
19 Feb 2016 |
| D1400297-v5 |
aLIGO, SUS, NON-MAGNETIC BLADE DAMPER ASSY., 2 PIECE CLAW CLAMP |
Eduardo Sanchez |
Fabrication
Suspensions
|
18 Feb 2016 |
| D1500220-v3 |
QUAD, SUS, Bounce & Roll mode damper, Blade |
Eduardo Sanchez |
Suspensions
Fabrication
|
16 Feb 2016 |
| D0900439-v5 |
Faraday Isolator TFP Polarizer Plate |
Manuel Ruiz et al. |
Auxiliary Optics
Basic R&D
|
29 Jan 2016 |
| D1600026-v1 |
aLIGO, AOS, SR2 AR HARTMANN BAFFLE, HWSY CENTER PANEL |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
27 Jan 2016 |
| D1600025-v1 |
aLIGO, AOS, SR2 AR HARTMANN BAFFLE, HWSY SIDE PANEL |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
27 Jan 2016 |
| D1400296-v5 |
aLIGO, SUS, NON-MAGNETIC BLADE DAMPER ASSY., 17g MASS |
Eduardo Sanchez |
Suspensions
Fabrication
|
08 Jan 2016 |
| D1200578-v3 |
SLC 1 HOLE ARM CAVITY BAFFLE FINAL ASSY (BSC1_L1-H1) |
Eduardo Sanchez et al. |
Auxiliary Optics
Assembly
|
09 Dec 2015 |
| D1500167-v1 |
PSL, IO PZT MOUNT ASSEMBLY. |
Eduardo Sanchez et al. |
Fabrication
|
20 Oct 2015 |
| D1500166-v1 |
PSL, IO PZT Sleeve Clamp |
Eduardo Sanchez et al. |
Fabrication
|
20 Oct 2015 |
| D1500235-v1 |
QUAD, SUS, Bounce & Roll mode damper, Grub Screw Magnet Retainer |
Eduardo Sanchez |
Fabrication
Suspensions
|
20 Oct 2015 |
| D1500221-v1 |
QUAD, SUS, Bounce & Roll mode damper, Mass .5g |
Eduardo Sanchez |
Fabrication
Suspensions
|
20 Oct 2015 |
| D1500271-v1 |
QUAD, SUS, Bounce & Roll mode damper, Mass .5g (C'BORED) |
Eduardo Sanchez et al. |
Suspensions
Fabrication
|
20 Oct 2015 |
| D1500223-v1 |
QUAD, SUS, Bounce & Roll mode damper, Mass 1.5g |
Eduardo Sanchez |
Suspensions
Fabrication
|
20 Oct 2015 |
| D1500222-v1 |
QUAD, SUS, Bounce & Roll mode damper, Mass 1.0g |
Eduardo Sanchez |
Suspensions
Fabrication
|
20 Oct 2015 |
| D1500219-v1 |
QUAD, SUS, Bounce & Roll mode damper, magnet holder |
Eduardo Sanchez |
Suspensions
Fabrication
|
20 Oct 2015 |
| D1500174-v1 |
Custom 10" reducer (ITM) |
Eduardo Sanchez |
System Engineering
Fabrication
|
09 Oct 2015 |
| D1500266-v1 |
CP, Au COATING MASK (BARREL) |
Eduardo Sanchez |
Fabrication
|
03 Sep 2015 |
| D1500267-v1 |
ERM, Au COATING MASK (BARREL) |
Eduardo Sanchez |
Fabrication
|
03 Sep 2015 |
| D1500264-v1 |
ERM, Au COATING MASK |
Eduardo Sanchez |
Fabrication
|
03 Sep 2015 |
| D1500217-v2 |
Compensation Plate, Au Coating Mask |
Eduardo Sanchez |
Fabrication
|
02 Sep 2015 |
| D0900512-v11 |
aLIGO Systems, WBSC6-H2 Top Level Chamber Assembly |
Jose Eduardo Chavez et al. |
Final Design
System Engineering
|
03 Aug 2015 |
| D1400350-v4 |
aLIGO, SURFACE CHARGE CONTROL IONIZER, NEEDLE |
Eduardo Sanchez |
System Engineering
Fabrication
|
24 Jul 2015 |
| D1400349-v6 |
aLIGO, SURFACE CHARGE CONTROL IONIZER, NEEDLE HOLDER |
Eduardo Sanchez |
Fabrication
System Engineering
|
16 Jul 2015 |
| D1500046-v3 |
aLIGO, OMC, Stray light baffle, Outer Panel (TOP) |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
14 Jul 2015 |
| D1500139-v5 |
ETM/ITM, Electrometer mounting fixture |
Gary Traylor et al. |
Fabrication
Suspensions
|
02 Jul 2015 |
| D1500013-v1 |
aLIGO, SYS, TMDS STRUCTURAL SUPPORT ASSY. |
Eduardo Sanchez |
System Engineering
Vacuum
Fabrication
|
06 Jun 2015 |
| L1400006-x0 |
Fabrication Acceptance Review Documents and Status |
David Shoemaker et al. |
Reviews
Detector
|
06 May 2015 |
| D1500054-v3 |
aLIGO, OMC, Stray light baffle, VERT PANEL (REFL AIR) |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
21 Apr 2015 |
| D080090-v3 |
ADVANCED LIGO, SUS, BLADE TIP STOP MOUNT, BS TOP STAGE |
Joe ODell et al. |
Suspensions
|
20 Apr 2015 |
| D1201478-v3 |
Horizontal Adjust, Earthquake Stop Assembly (OMCS) |
Sam Barnum et al. |
Sensing and Control
Final Design
|
20 Apr 2015 |
| D1500055-v2 |
aLIGO, OMC, Stray light baffle, VERT PANEL (-X Side).SLDPRT |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
08 Apr 2015 |
| D1500043-v2 |
aLIGO, OMC, Stray light baffle, Outer Panel (REFL AIR) |
Eduardo Sanchez |
Auxiliary Optics
Fabrication
|
08 Apr 2015 |
| D1500045-v2 |
aLIGO, OMC, Stray light baffle, Outer Panel (-Y SIDE) |
Eduardo Sanchez |
Auxiliary Optics
Fabrication
|
08 Apr 2015 |
| D1500044-v2 |
aLIGO, OMC, Stray light baffle, Outer Panel (TRANS AIR) |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
08 Apr 2015 |
| D1500042-v2 |
aLIGO, OMC, Stray light baffle, Outer Panel (-X Side) |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
07 Apr 2015 |
| D1500052-v2 |
aLIGO, OMC, Stray light baffle, VERT PANEL (TRANS AIR) |
Eduardo Sanchez |
Auxiliary Optics
Fabrication
|
07 Apr 2015 |
| D1500053-v2 |
aLIGO, OMC, Stray light baffle, VERT PANEL (-Y Side) |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
07 Apr 2015 |
| D1500050-v2 |
aLIGO, OMC, Stray light baffle, HORZ PANEL (-Y Side) |
Eduardo Sanchez |
Auxiliary Optics
Fabrication
|
07 Apr 2015 |
| D1500051-v2 |
aLIGO, OMC, Stray light baffle, HORZ PANEL (TRANS AIR) |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
07 Apr 2015 |
| D1500049-v2 |
aLIGO, OMC, Stray light baffle, HORZ PANEL (REFL AIR) |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
07 Apr 2015 |
| D1500048-v2 |
aLIGO, OMC, Stray light baffle, HORZ PANEL (-X Side) |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
07 Apr 2015 |
| D1500047-v2 |
Aligo, OMC, Stray light baffle, Inner Panel (BOT) |
Eduardo Sanchez |
Auxiliary Optics
Fabrication
|
07 Apr 2015 |
| E1500047-x0 |
DCN, Initial release of aLIGO, OMC, Stray light Baffle |
Eduardo Sanchez |
Auxiliary Optics
Fabrication
|
03 Apr 2015 |
| D1400335-v1 |
aLIGO, PSL, ISS PD Coax Cable, STRAIN RELIEF CLAMP |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
|
09 Feb 2015 |
| E1400335-x0 |
DCN, REVISED END STATION SYSTEM LAYOUT |
Eduardo Sanchez |
Integration
System Engineering
Installation
|
09 Feb 2015 |
| D1201152-v2 |
EARTHQUAKE STOP ADJUSTER, SHORT, BEAM SPLITTER, ASSY |
Bobby Moore et al. |
Suspensions
Final Design
|
22 Jan 2015 |
| D1100785-v5 |
SUS Nitronic Flat Washers |
Eduardo Sanchez et al. |
Preliminary Design
Conceptual Design
Suspensions
|
22 Jan 2015 |
| D1002234-v3 |
AdvLIGO SEI HAM3-L1, XYZ Local CS for ISC Components |
Jose Eduardo Chavez et al. |
Final Design
System Engineering
|
22 Jan 2015 |
| D1200384-v2 |
Custom TC-3 Dog Clamp, ISC, aLIGO |
Sam Barnum et al. |
Final Design
Seismic Isolation
|
22 Jan 2015 |
| D1300075-v4 |
CABLE HARNESS ROUTING CONFIGURATION, HAM 1 |
Eduardo Sanchez |
Installation
Integration
System Engineering
|
19 Jan 2015 |
| D070140-v3 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, top stage blade wire clamp shim |
Joe ODell et al. |
Final Design
Suspensions
Fabrication
|
18 Dec 2014 |
| D0900442-v7 |
aLIGO Systems, BSC1-L1 Top Level Chamber Assembly |
Ignacio Romero et al. |
Final Design
System Engineering
|
10 Dec 2014 |
| G1401337-v1 |
Test Mass Discharging System (TMDS) Design Review Presentation |
Rich Abbott et al. |
Final Design
System Engineering
Vacuum
|
20 Nov 2014 |
| D1101129-v2 |
aLIGO, SUS, QUAD UI MASS, REACTION CHAIN |
Michael Hillard et al. |
Suspensions
Final Design
|
19 Nov 2014 |
| D060403-v8 |
Advanced LIGO, SUS, Quad Top Mass, TOP MASS - Main and Reaction Assembly Drawing |
Joe ODell et al. |
Suspensions
|
18 Nov 2014 |
| D0902031-v6 |
Advanced LIGO, SUS, Top Mass - REACTION CHAIN |
Joe ODell et al. |
Suspensions
|
18 Nov 2014 |
| D1200962-v3 |
aLIGO AOS OpLev Passive Damping Assembly |
Eric James et al. |
Fabrication
|
05 Nov 2014 |
| D1100841-v4 |
aLIGO TMS TELE-OPT TABLE INSTALL TOOL ASSY |
Jesse Terrazas et al. |
Final Design
Auxiliary Optics
|
24 Sep 2014 |
| G1400396-v5 |
Plenary Lecture for SPIE Laser Damage 2014 |
Calum Torrie et al. |
System Engineering
|
18 Sep 2014 |
| D1200486-v3 |
ALIGO, COC, ETM/ITM FC SPRAY GUARD, SLIDE ASSY. |
Eduardo Sanchez |
Final Design
Fabrication
|
29 Jan 2013 |
| D1200606-v5 |
ALIGO, COC, ETM/ITM FC SPRAY GUARD., CARRIAGE ASSY. |
Eduardo Sanchez |
Fabrication
Final Design
|
16 Sep 2014 |
| D1300233-v2 |
aLIGO, SUS, PEN MASS WIRE CLAMP ASSY. |
Eduardo Sanchez |
System Engineering
Fabrication
|
28 Aug 2014 |
| D1200485-v6 |
ALIGO, COC, ETM/ITM FC SPRAY GUARD, E-COLLAR |
Eduardo Sanchez |
Preliminary Design
|
19 Aug 2014 |
| D1000980-v6 |
aLIGO, TCP OPTICS WITH PRISM ASSEMBLY |
Kurt Buckland et al. |
Core Optics
|
12 Aug 2014 |
| D0901468-v9 |
aLIGO Systems Layout LHO X-End Station |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
31 Jul 2014 |
| D0901467-v9 |
aLIGO Systems Layout LHO Y-End Station |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
31 Jul 2014 |
| D1200484-v5 |
ALIGO, COC, ETM/ITM FC SPRAY GUARD, MT. RING |
Eduardo Sanchez |
Fabrication
Final Design
|
30 Jul 2014 |
| E1400213-x0 |
DCN, Initial release of aLIGO, SUS, BS WIRE SHIELDING BAFFLE ASSY. AND ASSOCIATED DOCS. |
Eduardo Sanchez |
System Engineering
Integration
Fabrication
Installation
Suspensions
|
20 Jun 2014 |
| D1300512-v3 |
aLIGO, SYS, 1" DIA WITNESS OPTIC MOUNT ASSEMBLY |
Kurt Buckland et al. |
System Engineering
|
19 Jun 2014 |
| D0901490-v5 |
aLIGO LIVINGSTON SYSTEM LAYOUT |
Jose Eduardo Chavez et al. |
System Engineering
|
19 Jun 2014 |
| D1001954-v1 |
aLIGO, ASSEMBLY, BSC ARM |
Scott Shankle et al. |
Conceptual Design
Auxiliary Optics
|
13 Jun 2014 |
| D1301036-v1 |
aLIGO, SYS, 1" DIA WITNESS OPTIC |
Eduardo Sanchez |
Integration
System Engineering
Installation
|
13 Jun 2014 |
| D0901491-v3 |
aLIGO, Mechanical Layout |
Calum Torrie et al. |
System Engineering
|
07 Apr 2014 |
| T1300014-v5 |
Aligo, BSC Flooring + HAM ISI, Witness Sample Placement Requirements |
Eduardo Sanchez |
Integration
System Engineering
Installation
|
28 Mar 2014 |
| D070234-v4 |
Advanced LIGO, SUS, Penultimate Mass, Pen Re Mass Magnets (External Shielded Magnets) |
Joe ODell et al. |
Suspensions
|
11 Mar 2014 |
| D1300275-v4 |
Aligo, 4" Silicon Wafer Vertical (and Horizontal) Stand Assembly |
Eduardo Sanchez |
Fabrication
Installation
|
10 Mar 2014 |
| D1300273-v2 |
Aligo, 4" Silicon Wafer Stand, Housing |
Eduardo Sanchez |
Installation
Fabrication
|
10 Mar 2014 |
| D1300274-v2 |
Aligo, 4" Silicon Wafer Stand, Base |
Eduardo Sanchez |
Installation
Fabrication
|
07 Mar 2014 |
| D1101303-v1 |
ALIGO, SUS, QUAD WIRING, UHV CONNECTOR CLAMP, MT. BRACKET |
Eduardo Sanchez |
Final Design
Fabrication
Suspensions
|
28 Feb 2014 |
| D1101305-v1 |
ALIGO, SUS, QUAD WIRING CLAMP ASSY. |
Eduardo Sanchez |
Final Design
Fabrication
Suspensions
|
28 Feb 2014 |
| D070220-v5 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, UIM Mass Top Wire Clamp |
Joe ODell et al. |
Final Design
Fabrication
Suspensions
Installation
|
06 Feb 2014 |
| D1001963-v4 |
aLIGO_AOS_Output Alignment Fixture Assy |
Manuel Ruiz et al. |
Auxiliary Optics
Basic R&D
|
18 Dec 2013 |
| D1100937-v1 |
UI MASS MAGNET AND FLAG MOUNT ASSY, aLIGO |
Michael Hillard |
Suspensions
Final Design
|
27 May 2011 |
| D1002221-v3 |
aLIGO OPTICS TABLE SPEADER BRIDGE |
Ignacio Romero et al. |
Final Design
Auxiliary Optics
Fabrication
|
17 Dec 2013 |
| D1003325-v2 |
ISC Fast Shutter Hardstop |
Jason Fishner et al. |
Sensing and Control
Conceptual Design
|
03 Dec 2013 |
| D1201308-v2 |
LEFT SIDE WALL, aLIGO TCS CO2P TABLE PERISCOPE |
Mindy Jacobson et al. |
System Engineering
Auxiliary Optics
Final Design
Fabrication
|
11 Nov 2013 |
| D1201307-v2 |
RIGHT SIDE WALL, aLIGO TCS CO2P TABLE PERISCOPE |
Mindy Jacobson et al. |
Fabrication
System Engineering
Auxiliary Optics
Final Design
|
11 Nov 2013 |
| D1201306-v2 |
FRONT PLATE, aLIGO TCS CO2P TABLE PERISCOPE |
Mindy Jacobson et al. |
Fabrication
System Engineering
Auxiliary Optics
Final Design
|
11 Nov 2013 |
| D1200654-v3 |
SLC_ACB_LEFT ONE HOLE BOX ASSY, BSC5-L1& BSC10-H1 (with PD) |
Tim Nguyen et al. |
Auxiliary Optics
Assembly
Installation
|
11 Nov 2013 |
| D1101048-v3 |
aLIGO, PLATE, TEMPLATE, ALIGNMENT , BSC STRUCTURE |
Scott Shankle et al. |
Final Design
Fabrication
Installation
Suspensions
|
25 Aug 2011 |
| D1100209-v2 |
ALIGO, AOS, OPLEV, XMTR PYLON ENCLOSURE ASSY. |
Carrie Wilkerson et al. |
Fabrication
Auxiliary Optics
Final Design
|
18 Apr 2012 |
| D1002235-v6 |
AdvLIGO SEI HAM3-L1, XYZ Local CS for IO Optic Mount Components |
Jose Eduardo Chavez et al. |
Final Design
System Engineering
|
09 Oct 2013 |
| D1201370-v2 |
Front Side Wall Strut, CO2P Periscope |
Mindy Jacobson et al. |
Final Design
Auxiliary Optics
Fabrication
|
08 Oct 2013 |
| D1201067-v2 |
Upper Periscope Mirror Mount Adapter, aLIGO TCS CO2P, H1-L1 |
Mindy Jacobson et al. |
Assembly
Auxiliary Optics
Final Design
|
08 Oct 2013 |
| D1201070-v4 |
ALIGO, HAM4, TCS HWS, INSTALLATION PLATE KIT |
Mindy Jacobson et al. |
Auxiliary Optics
System Engineering
Vacuum
Installation
Assembly
|
30 Sep 2013 |
| D1201309-v1 |
VISIBLE ALIGNMENT MIRROR BRACKET |
Mindy Jacobson et al. |
Final Design
Auxiliary Optics
System Engineering
Fabrication
|
29 Sep 2013 |
| D1201310-v2 |
BRACE, UPPER PERISCOPE MIRROR ADAPTER |
Mindy Jacobson et al. |
Fabrication
Final Design
Auxiliary Optics
System Engineering
|
29 Sep 2013 |
| D1200395-v1 |
aLIGO AOS PhotCal TX, GROUT PLATE TEMPLATE |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
Final Design
|
27 Sep 2013 |
| D1201371-v2 |
Back Side Wall Strut, CO2P Periscope |
Mindy Jacobson et al. |
Fabrication
Auxiliary Optics
Final Design
|
23 Sep 2013 |
| E1200891-x0 |
DCN, aLIGO TCS CO2 Laser Projection Periscope Assembly, H1 and L1 |
Aidan Brooks et al. |
Fabrication
Assembly
Auxiliary Optics
|
21 Sep 2013 |
| D1102449-v2 |
aLIGO SUS L1 H1 HAM5 PRE INSTALLATION PLATE LAYOUT |
Sam Barnum et al. |
Final Design
Installation
Suspensions
|
05 Oct 2012 |
| D1102450-v2 |
aLIGO SUS L1 H1 HAM5 HSTS PRE INSTALLATION PLATE |
Sam Barnum et al. |
Suspensions
Installation
Final Design
|
05 Oct 2012 |
| D1101864-v4 |
aLIGO SUS L1 H1 HAM4 SR2 PRE INSTALLATION PLATE LAYOUT |
Sam Barnum et al. |
Installation
Suspensions
Final Design
|
16 Sep 2013 |
| D0901362-v2 |
ALIGO, AOS, OPLEV, ITM/ETM TELESCOPE ASSY. (LONG RANGE) |
Craig Conley et al. |
Assembly
Final Design
Auxiliary Optics
|
13 Sep 2013 |
| D1300781-v1 |
ALIGO, AOS, OPLEV, ITM/ETM TELESCOPE ASSY. (SHORT RANGE) |
Eduardo Sanchez |
Final Design
Auxiliary Optics
Assembly
|
12 Sep 2013 |
| D1300023-v3 |
Table Balance Weight Centered: 1.0#,0.5#, 0.25# |
Michael Smith et al. |
Fabrication
Auxiliary Optics
|
26 Aug 2013 |
| D1000549-v6 |
aLIGO TMS UPPER INTERMEDIATE MASS TOP ASSEMBLY |
Craig Conley et al. |
Installation
Auxiliary Optics
Integration
Final Design
|
23 Aug 2013 |
| D1101619-v1 |
ACB_STAGE ZERO NARROW-BSC4-9, END SUPPORT |
Tim Nguyen et al. |
Auxiliary Optics
Basic R&D
|
22 Aug 2013 |
| D1101595-v2 |
ACB_Stage Zero Narrow_Guide Block |
Tim Nguyen |
Basic R&D
Auxiliary Optics
|
19 Dec 2011 |
| D1101613-v2 |
ACB_Stage Zero Narrow- Dog Clamp, End |
Tim Nguyen |
Basic R&D
Auxiliary Optics
|
05 Dec 2011 |
| D1201420-v1 |
ZnSe Viewport Beam Block, Long, aLIGO TCS CO2P, H1-L1 |
Mindy Jacobson et al. |
Auxiliary Optics
Requirements
Vacuum
Installation
Assembly
|
20 Aug 2013 |
| D1201421-v2 |
ZnSe Viewport Beam Block, Short, aLIGO TCS CO2P, H1-L1 |
Mindy Jacobson et al. |
Requirements
Auxiliary Optics
Vacuum
Installation
Assembly
|
20 Aug 2013 |
| D1101526-v4 |
aLIGO TMS Mass Balanced Assembly |
Craig Conley et al. |
Suspensions
Auxiliary Optics
Final Design
|
12 Aug 2013 |
| D1101307-v1 |
TOOLING LAYOUT-aLIGO TMS Telescope Cartridge lift Safety Supports |
Craig Conley |
Auxiliary Optics
|
28 Mar 2012 |
| D1200525-v6 |
aLIGO TMS Mass Base Assembly |
Craig Conley et al. |
Auxiliary Optics
Suspensions
|
22 Jul 2013 |
| D1101527-v6 |
aLIGO TMS Mass Secondary Assembly |
Craig Conley et al. |
Final Design
Auxiliary Optics
Suspensions
|
19 Jul 2013 |
| D1002728-v3 |
aLIGO TMS Primary Mirror Side Clamp Lower |
Craig Conley et al. |
Fabrication
Auxiliary Optics
Final Design
|
10 Jul 2013 |
| D1200526-v1 |
ALIGO, AOS, TMS, ALIGNMENT TELESCOPE, MT. ADAPTER |
Eduardo Sanchez et al. |
Fabrication
Auxiliary Optics
Final Design
|
10 Jul 2013 |
| D060349-v3 |
Advanced LIGO, SUS, N-Ptype PENULTIMATE MASS, LIGO 1 OSEM MOUNT (FOR PENRE MASS) |
Joe ODell et al. |
Suspensions
|
12 Nov 2012 |
| D1102291-v9 |
aLIGO TMS ISC Table Structural Assembly |
Craig Conley et al. |
Auxiliary Optics
Final Design
|
27 Jun 2013 |
| D1101170-v4 |
ALIGO, VE, VIEWPORT GUARD ASSY., EXTENSION |
Eduardo Sanchez |
Auxiliary Optics
|
27 Jun 2013 |
| D1300232-v2 |
aLIGO, SUS, PEN MASS WIRE CLAMP |
Eduardo Sanchez |
System Engineering
Fabrication
|
07 Jun 2013 |
| D1001164-v5 |
aLIGO OPTICS TABLE GUSSET PLATE, SMALL |
Ignacio Romero et al. |
Fabrication
Auxiliary Optics
Final Design
|
01 Jun 2013 |
| D1200596-v1 |
aLIGO_ITM Elliptical X_End block |
Tim Nguyen |
Basic R&D
Auxiliary Optics
|
08 Nov 2012 |
| D1201454-v2 |
ACB_Stage Zero-BSC3_ Endclamp, End |
Tim Nguyen et al. |
Auxiliary Optics
Fabrication
Modelling
|
21 May 2013 |
| D1101622-v2 |
ACB_Stage Zero-BSC1_ Endclamp, End |
Tim Nguyen et al. |
Fabrication
Auxiliary Optics
|
21 May 2013 |
| D1101610-v2 |
ACB_Stage Zero Guide Block-BSC 1_H1-L1 |
Tim Nguyen et al. |
Fabrication
Auxiliary Optics
|
21 May 2013 |
| D1101609-v2 |
ACB_Stage Zero Guide Block-BSC 3 |
Tim Nguyen et al. |
Fabrication
Auxiliary Optics
|
21 May 2013 |
| D1200589-v1 |
aLIGO_ITM Elliptical X_Guide Block |
Tim Nguyen |
Auxiliary Optics
Basic R&D
|
29 Jun 2012 |
| D1200604-v1 |
aLIGO_ITM Elliptical XY_Interface fixture Slider |
Tim Nguyen |
Auxiliary Optics
Modelling
|
21 Dec 2012 |
| D1101512-v3 |
aLIGO TMS Upper Mass Bottom Plate |
Craig Conley et al. |
Auxiliary Optics
|
14 May 2013 |
| D1200139-v2 |
aLIGO AOS ITM BAFFLE INTERFACE MOUNTING PLATE BSC2 H1-L1 |
Heidy Kelman et al. |
Auxiliary Optics
Basic R&D
|
09 Jul 2012 |
| D1300263-v1 |
ALIGO, AOS, VIEWPORT LEAK TEST FIXTURE, PROOF TEST CAP ASSY. FOR [H1/L1] CO2P V.P. |
Eduardo Sanchez |
Integration
Installation
Fabrication
|
28 Mar 2013 |
| D1300120-v1 |
aLIGO, SEI, HAM6 OMC INSTALLATION PLATE |
Eduardo Sanchez |
Installation
Fabrication
|
06 Mar 2013 |
| D1200265-v3 |
Elevation Support Web, CO2 Laser Projection Steering Mirror 2, H1-L1 |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
Fabrication
Assembly
|
22 Feb 2013 |
| D1102384-v3 |
aLIGO TCS CO2P SM2 ASSY LONG SUPPORT |
Mindy Jacobson et al. |
Fabrication
Final Design
Preliminary Design
Auxiliary Optics
Vacuum
|
22 Feb 2013 |
| D0901099-v2 |
AdvLIGO SUS HAM3-H1, XYZ Local CS for HSTS (MC2) Sub-Assy |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
12 Feb 2013 |
| D0901098-v2 |
AdvLIGO SUS HAM3-H1, XYZ Local CS for HSTS (PR2) Sub-Assy |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
12 Feb 2013 |
| D0901089-v3 |
aLIGO SUS HAM2-H1, XYZ Local CS for HSTS (MC3) Sub-Assy |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
12 Feb 2013 |
| D0901088-v3 |
AdvLIGO SUS HAM2-H1, XYZ Local CS for HSTS (MC1) Sub-Assy |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
12 Feb 2013 |
| D1003196-v3 |
aLIGO TCS 10-in Custom Viewport Flange |
Cheryl Vorvick et al. |
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
Fabrication
|
01 Feb 2013 |
| D1200612-v3 |
aLIGO_ITM Elliptical Y_End block |
Tim Nguyen et al. |
Basic R&D
Auxiliary Optics
|
29 Jan 2013 |
| D0900413-v6 |
aLIGO SUS HAM2-L1, XYZ Local CS for HSTS (MC1) Sub-Assy |
Jose Eduardo Chavez et al. |
System Engineering
Final Design
|
25 Jan 2013 |
| D1201507-v1 |
Support Block, IR Sensor |
Mindy Jacobson et al. |
Assembly
Auxiliary Optics
Final Design
|
07 Jan 2013 |
| D961170-v2 |
Equipment Arrangement, Left Mid Station, Washington, LIGO Vacuum Equipment, Rev. 05 - AS BUILT |
Psi Psi et al. |
Document Migration
|
04 Jan 2013 |
| D961168-v2 |
Equipment Arrangement Plan, Right Mid Station Area 300, Washington, LIGO Vacuum Equipment |
Psi Psi et al. |
Document Migration
|
04 Jan 2013 |
| D1201068-v1 |
Lower Periscope Mirror Mount, aLIGO TCS CO2P, H1-L1 |
Mindy Jacobson et al. |
Assembly
Auxiliary Optics
Final Design
|
13 Dec 2012 |
| D1201305-v1 |
COVER, SECONDARY VIEWPORT CLAMP |
Mindy Jacobson et al. |
Fabrication
Vacuum
Auxiliary Optics
Final Design
|
07 Dec 2012 |
| D1201304-v1 |
SECONDARY VIEWPORT CLAMP, H1-L1 BSC 1 AND 3 |
Mindy Jacobson et al. |
Fabrication
Final Design
Auxiliary Optics
Vacuum
|
07 Dec 2012 |
| D1201303-v1 |
PRIMARY VIEWPORT CLAMP, H1-L1 BSC 1 AND 3 |
Mindy Jacobson et al. |
Fabrication
Vacuum
Auxiliary Optics
Final Design
|
07 Dec 2012 |
| D1003162-v5 |
aLIGO TMS TELESCOPE PITCH MASS ADJ. ROD |
Michael Miller et al. |
Auxiliary Optics
Final Design
|
06 Dec 2012 |
| D1002696-v4 |
aLIGO ETM TELESCOPE BRIDGE SUPPORT TEE PLATE_Front |
Ken Mailand et al. |
Final Design
Auxiliary Optics
|
06 Dec 2012 |
| D0900440-v4 |
Faraday Isolator TFP Polarizer Plate Assy |
Manuel Ruiz et al. |
Auxiliary Optics
Basic R&D
|
15 Nov 2012 |
| D1200197-v4 |
aLIGO_AOS_Wedged Prism Holder Assy |
Manuel Ruiz et al. |
Auxiliary Optics
Assembly
|
14 Nov 2012 |
| D1003161-v2 |
TRIM MASS AND DAMPING ASSY, BSC-ISI |
Fabrice Matichard et al. |
Final Design
Seismic Isolation
|
12 Nov 2012 |
| D060348-v3 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, OSEM TRANSLATION PLATE, ETM PEN RE MASS CAN |
Joe ODell et al. |
Suspensions
|
12 Nov 2012 |
| D060351-v3 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, BASE PLATE, LIGO 1 OSEM MOUNT |
Joe ODell et al. |
Suspensions
|
12 Nov 2012 |
| D1102133-v5 |
Aligo, SUS, QUAD, NPTYPE WIRING HARNESS, MASS WIRE CLAMP |
Eduardo Sanchez et al. |
Final Design
System Engineering
Fabrication
|
02 Nov 2012 |
| D1201443-v1 |
Interface Spacer Plate, aLIGO TCS CO2P UHV Steering Mirror 2 Assembly, BSC2, H1-L1 |
Mindy Jacobson et al. |
Assembly
Vacuum
Auxiliary Optics
Final Design
|
01 Nov 2012 |
| E1200003-v2 |
Formal Drawing Tree & BOM, aLIGO TCS CO2 Laser Projection Steering Mirror 2, H1/L1 |
Mindy Jacobson et al. |
Vacuum
Auxiliary Optics
Preliminary Design
Final Design
|
18 Oct 2012 |
| E1200892-x0 |
DCN, aLIGO TCS CO2 Laser Projection Viewport Assembly, H1 and L1 |
Aidan Brooks et al. |
Fabrication
Assembly
Vacuum
Auxiliary Optics
|
10 Oct 2012 |
| D1001862-v6 |
Prism Base Support |
Manuel Ruiz et al. |
Auxiliary Optics
Basic R&D
|
03 Oct 2012 |
| D0900359-v3 |
Wedged Prism Assy |
Niem Nguyen et al. |
Auxiliary Optics
Modelling
|
21 Sep 2012 |
| D1002364-v3 |
ALIGO_AOS_D0900623_Faraday Isolator Beam Dump Assy |
Manuel Ruiz et al. |
Auxiliary Optics
Basic R&D
|
20 Sep 2012 |
| D070221-v3 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, UIM Mass Top Wire Clamp Assy. |
Joe ODell et al. |
Final Design
Suspensions
|
07 Sep 2012 |
| D070218-v3 |
ALIGO, SUS, Quad, Wiring Harness, Mass Wire Clamp |
Joe ODell et al. |
Final Design
Fabrication
|
07 Sep 2012 |
| D060336-v4 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, 2MM CAM, OSEM ADJUSTER |
Joe ODell et al. |
Suspensions
Final Design
|
07 Sep 2012 |
| D1201126-v1 |
aLIGO, AOS, OpLev, BS Telescope Mount Base |
Eric James et al. |
Fabrication
Auxiliary Optics
|
15 Aug 2012 |
| D0900419-v2 |
AdvLIGO SUS BSC6-H2, XYZ Local CS for TMS ETM Tel Assy |
Jose Eduardo Chavez et al. |
Auxiliary Optics
|
14 Aug 2012 |
| D1102134-v3 |
Aligo, SUS, QUAD, CABLE CLAMP DIVIDER SHIM OSEM/ESD (REDESIGNED) |
Eduardo Sanchez |
Fabrication
Final Design
System Engineering
|
13 Aug 2012 |
| D1102440-v2 |
Support Bracket, Short-Side Suspension Arm |
Mindy Jacobson et al. |
Final Design
Preliminary Design
Auxiliary Optics
Vacuum
Fabrication
|
09 Aug 2012 |
| D1102441-v2 |
Support Bracket, Long-Side Suspension Arm |
Mindy Jacobson et al. |
Fabrication
Preliminary Design
Final Design
Vacuum
Auxiliary Optics
|
09 Aug 2012 |
| D1200266-v2 |
U-Channel, 3/4" leg, 1.5" base, SSTL 304 |
Mindy Jacobson et al. |
Fabrication
Vacuum
Auxiliary Optics
Preliminary Design
Final Design
|
08 Aug 2012 |
| D1102380-v2 |
aLIGO TCS CO2P SM2 ASSY SHORT SUPPORT |
Mindy Jacobson et al. |
Fabrication
Final Design
Preliminary Design
Auxiliary Optics
Vacuum
|
06 Aug 2012 |
| D1100626-v1 |
ALIGO, OPLEV, PERISCOPE, MDC ZL REDUCER (MODIFIED) |
Eduardo Sanchez et al. |
Auxiliary Optics
Final Design
Fabrication
|
18 Jul 2012 |
| D1002260-v1 |
ALIGO, OPLEV, PERISCOPE, OPTICAL BOX ASSY. |
Ignacio Romero et al. |
Auxiliary Optics
Final Design
|
18 Jul 2012 |
| D1100833-v1 |
ALIGO, OPLEV, PERISCOPE, BSC2-L1 LAYOUT |
Eduardo Sanchez et al. |
Conceptual Design
Auxiliary Optics
|
18 Jul 2012 |
| D1100625-v1 |
ALIGO, OPLEV, PERISCOPE ASSY. |
Eduardo Sanchez |
Auxiliary Optics
Preliminary Design
|
18 Jul 2012 |
| D1100617-v2 |
ALIGO AOS OPLEV PCB CARRIER |
Eduardo Sanchez et al. |
Fabrication
Final Design
Auxiliary Optics
|
18 Jul 2012 |
| D1200487-v1 |
ALIGO, COC, ETM/ITM FC SPRAY GUARD, REUSABLE CR WIPE BAND |
Eduardo Sanchez |
Final Design
Fabrication
|
18 Jul 2012 |
| D1200527-v2 |
ALIGO, AOS, TMS, ALIGNMENT TELESCOPE, CENTERING SLEEVE |
Eduardo Sanchez et al. |
Fabrication
Auxiliary Optics
Final Design
|
06 Jul 2012 |
| D1200491-v2 |
ALIGO, COC, ETM/ITM FC SPRAY GUARD ASSY., SCREW, SHC, 8-32 X .75 LG., GROOVED |
Eduardo Sanchez |
Fabrication
System Engineering
Final Design
|
06 Jul 2012 |
| D1200964-v1 |
aLIGO AOS OpLev Base Extension |
Eric James et al. |
Fabrication
Auxiliary Optics
Final Design
|
27 Jun 2012 |
| D1102413-v1 |
Elevation Support Plate, CO2 Laser Projection Steering Mirror 2, H1-L1 |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
Fabrication
|
25 Jun 2012 |
| D1101727-v2 |
aLIGO TMS Telescope End Plate, Primary Side |
Jesse Terrazas et al. |
Fabrication
Final Design
Auxiliary Optics
|
22 Jun 2012 |
| D1101688-v2 |
aLIGO TMS Telescope End Plate, Secondary Side |
Jesse Terrazas et al. |
Final Design
Auxiliary Optics
Fabrication
|
22 Jun 2012 |
| D1200884-v1 |
aLIGO, GROUNDING CABLE BRACKET ASSY. |
Eduardo Sanchez |
Fabrication
Final Design
System Engineering
|
11 Jun 2012 |
| D1101934-v2 |
ALIGO, AOS, VIEWPORT LEAK TEST FIXTURE, THREADED LEAD SCREW MT. BLOCK |
Eduardo Sanchez |
Final Design
Auxiliary Optics
Fabrication
|
08 Jun 2012 |
| D1200827-v1 |
ALIGO, OPLEV, HEPI MT. BS XCVR ENCLOSURE, BELLOW MT. RING |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
Final Design
|
07 Jun 2012 |
| D1200824-v1 |
ALIGO, OPLEV, ENCLOSURE LID SUPPORT BRACKET |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
Final Design
|
07 Jun 2012 |
| D1200823-v1 |
ALIGO, OPLEV, HEPI MT. BS XCVR ENCLOSURE ASSY. |
Eduardo Sanchez |
Fabrication
Final Design
Auxiliary Optics
|
07 Jun 2012 |
| D1200822-v1 |
ALIGO, AOS, OPLEV, RX RCVR ENCLOSURE ASSY., LH (SR3) |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
Final Design
|
07 Jun 2012 |
| D1200843-v1 |
ALIGO, SUS, HAM OPTIC TABLE, C-CLAMP |
Eduardo Sanchez |
Final Design
Suspensions
Fabrication
|
07 Jun 2012 |
| D1200821-v1 |
ALIGO, OPLEV, RX RCVR ENCLOSURE ASSY., RH (PR3) |
Eduardo Sanchez |
Fabrication
Final Design
Auxiliary Optics
|
05 Jun 2012 |
| D1200820-v1 |
ALIGO, OPLEV, RX RCVR ENCLOSURE ASSY., QPD SUPPORT |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
Final Design
|
05 Jun 2012 |
| D1200819-v1 |
ALIGO, OPLEV, RX RCVR ENCLOSURE ASSY., BREADBOARD |
Eduardo Sanchez |
Fabrication
Final Design
Auxiliary Optics
|
05 Jun 2012 |
| D1102176-v1 |
Azimuth Support Plate, CO2 Laser Projection Steering Mirror 2, H1-L1 |
Mindy Jacobson et al. |
Preliminary Design
Final Design
Vacuum
Auxiliary Optics
Fabrication
|
04 Jun 2012 |
| D1100706-v1 |
ALIGO, AOS, MIRROR MT. PEDESTAL (HAM) |
Eduardo Sanchez et al. |
Final Design
Auxiliary Optics
Fabrication
|
01 May 2012 |
| D1200632-v1 |
ALIGO, AOS, OPLEV, BS XCVR MT. PLATE (HAM) |
Eduardo Sanchez |
Fabrication
Final Design
Auxiliary Optics
|
01 May 2012 |
| D1001109-v4 |
aLIGO ETM TELESCOPE BRIDGE SUPPORT TEE PLATE |
Ignacio Romero et al. |
Final Design
Auxiliary Optics
Fabrication
|
25 Apr 2012 |
| E1200399-x0 |
DCN, INITIAL RELEASE OF ALIGO, AOS, OPLEV, BS XCVR MT. PLATE (HAM) |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
Final Design
|
24 Apr 2012 |
| D1200622-v1 |
ALIGO, AOS, OPLEV ENCLOSURES, 6 IN. REDUCER |
Eduardo Sanchez |
Final Design
Auxiliary Optics
Fabrication
|
24 Apr 2012 |
| D1200528-v1 |
ALIGO, AOS, OPLEV ENCLOSURES, 4 IN. REDUCER |
Eduardo Sanchez |
Final Design
Auxiliary Optics
Fabrication
|
24 Apr 2012 |
| D1200463-v1 |
ALIGO, AOS, OPLEV XCVR PYLON ENCLOSURE ASSY. |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
Final Design
|
17 Apr 2012 |
| D1200488-v1 |
ALIGO, SUS, QUAD, SPRAY GUARD ASSY., SCREW, SHC, 1/4-20 X .88 LG., CAPTIVE |
Eduardo Sanchez |
Final Design
Fabrication
|
12 Apr 2012 |
| D1102175-v1 |
Fine Adjust Pivot Rod, CO2 Laser Projection Steering Mirror 2, H1-L1 |
Mindy Jacobson et al. |
Fabrication
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
|
01 Apr 2012 |
| D1200321-v1 |
ALIGO, AOS, TIMS TELESCOPE, SECONDARY MIRROR, MT. BRACKET |
Ken Mailand et al. |
Auxiliary Optics
Final Design
Fabrication
|
30 Mar 2012 |
| D1200489-v1 |
ALIGO, SUS, QUAD, SPRAY GUARD ASSY., CLAMPING FLANGE |
Eduardo Sanchez |
Final Design
Fabrication
|
30 Mar 2012 |
| D1001973-v3 |
aLIGO TMS FOCUS SCREW |
Michael Miller et al. |
Auxiliary Optics
Final Design
Fabrication
|
29 Mar 2012 |
| D1200249-v1 |
aLIGO TMS F2 Mirror Base |
Craig Conley et al. |
Fabrication
Auxiliary Optics
Final Design
|
29 Mar 2012 |
| D1100114-v2 |
TMS Telescope Secondary Mirror Clamp |
Craig Conley et al. |
Final Design
Auxiliary Optics
Fabrication
|
26 Mar 2012 |
| D1100672-v2 |
TMS Vertical Safety Clamp Base |
Craig Conley et al. |
Final Design
Auxiliary Optics
Fabrication
|
26 Mar 2012 |
| D1100674-v2 |
TMS Vertical Safety Suspended Clamp |
Craig Conley et al. |
Fabrication
Final Design
Auxiliary Optics
|
26 Mar 2012 |
| D1002769-v2 |
aLIGO_TMS_Telescope_Roll_Slide_Bkt |
Ken Mailand et al. |
Final Design
Auxiliary Optics
Fabrication
|
26 Mar 2012 |
| D1002768-v4 |
aLIGO_TMS_Telescope_Roll_Mass_Adj_Rod |
Ken Mailand et al. |
Final Design
Auxiliary Optics
Fabrication
|
26 Mar 2012 |
| D1002755-v2 |
aLIGO_TMS_Telescope_Roll_Slide_Rod |
Ken Mailand et al. |
Final Design
Auxiliary Optics
Fabrication
|
26 Mar 2012 |
| D1002240-v2 |
aLIGO_TMS_Tele_Wire_Clamp_Base |
Ken Mailand et al. |
Fabrication
Final Design
Auxiliary Optics
|
26 Mar 2012 |
| D1001129-v5 |
aLIGO ETM OPTICAL TABLE |
Ken Mailand et al. |
Auxiliary Optics
Final Design
Fabrication
|
26 Mar 2012 |
| D1001943-v2 |
aLIGO TOP LONG TUBE EARTHQUAKE STOP PLATE |
Ken Mailand et al. |
Fabrication
Auxiliary Optics
Final Design
|
26 Mar 2012 |
| D1001108-v3 |
aLIGO ETM TELESCOPE TUBE LARGE WASHER |
Craig Conley et al. |
Auxiliary Optics
Final Design
Fabrication
|
26 Mar 2012 |
| D1002699-v3 |
aLIGO_Pitch_Slide_Mass |
Ken Mailand et al. |
Final Design
Auxiliary Optics
Fabrication
|
26 Mar 2012 |
| D1002758-v3 |
aLIGO_TMS_Telescope_Pitch_Guide |
Ken Mailand et al. |
Fabrication
Final Design
Auxiliary Optics
|
26 Mar 2012 |
| D1002698-v3 |
aLIGO_TMS_Telescope_Roll_Slide_Mass |
Ken Mailand et al. |
Auxiliary Optics
Final Design
Fabrication
|
26 Mar 2012 |
| D1001163-v3 |
aLIGO OPTICS TABLE GUSSET PLATE, LARGE |
Craig Conley et al. |
Fabrication
Auxiliary Optics
Final Design
|
26 Mar 2012 |
| D1100341-v2 |
ALIGO, AOS, OPLEV ENCLOSURE ASSY., FRONT PANEL |
Carrie Wilkerson et al. |
Final Design
Auxiliary Optics
Fabrication
|
15 Mar 2012 |
| D1200407-v1 |
ALIGO, AOS, OPLEV RCVR ENCLOSURE ASSY., FRONT PANEL WELDMENT |
Eduardo Sanchez |
Fabrication
Final Design
Auxiliary Optics
|
15 Mar 2012 |
| D1100342-v2 |
ALIGO, AOS, OPLEV, RCVR ENCLOSURE ASSY. |
Carrie Wilkerson et al. |
Auxiliary Optics
Final Design
Fabrication
|
15 Mar 2012 |
| D1100226-v2 |
ALIGO, AOS, OPLEV PYLON ENCLOSURE, FRONT PANEL SHUTTER WELDMENT |
Carrie Wilkerson et al. |
Fabrication
Final Design
Auxiliary Optics
|
13 Mar 2012 |
| D1100205-v2 |
ALIGO, AOS, OPLEV PYLON ENCLOSURE ASSY., FRONT PANEL SHUTTER |
Carrie Wilkerson et al. |
Fabrication
Auxiliary Optics
Final Design
|
12 Mar 2012 |
| D1003290-v2 |
ALIGO, AOS, OPLEV, XMTR PYLON ENCLOSURE ASSY., SIDE COVER |
Carrie Wilkerson et al. |
Auxiliary Optics
Final Design
Fabrication
|
12 Mar 2012 |
| D1100210-v2 |
ALIGO, AOS, OPLEV, XMTR PYLON ENCLOSURE ASSY., FRONT PANEL |
Carrie Wilkerson et al. |
Fabrication
Final Design
Auxiliary Optics
|
12 Mar 2012 |
| D1100344-v2 |
ALIGO, AOS, OPLEV, RCVR ENCLOSURE ASSY., BOTTOM COVER |
Carrie Wilkerson et al. |
Auxiliary Optics
Final Design
Fabrication
|
12 Mar 2012 |
| D1100100-v2 |
ALIGO, AOS, OPLEV, PYLON ENCLOSURE ASSY., SIDE COVER |
Carrie Wilkerson et al. |
Fabrication
Final Design
Auxiliary Optics
|
12 Mar 2012 |
| D1101938-v2 |
ALIGO, AOS, VIEWPORT LEAK TEST FIXTURE, PROOF TEST CAP ASSY. (COML V.P) |
Eduardo Sanchez |
Final Design
Fabrication
|
09 Mar 2012 |
| D1200399-v1 |
ALIGO, AOS, VIEWPORT LEAK TEST FIXTURE, INTERNAL SUPPORT RING |
Eduardo Sanchez |
Fabrication
Final Design
Auxiliary Optics
|
09 Mar 2012 |
| D1101932-v2 |
ALIGO, AOS, VIEWPORT LEAK TEST FIXTURE, HORIZ. SUPPORT MT. STUD |
Eduardo Sanchez |
Auxiliary Optics
Final Design
Fabrication
|
26 Jan 2012 |
| D1102147-v3 |
aLIGO, SUS, QUAD, FLOUREL CABLE CLAMP PAD (REDESIGNED) |
Eduardo Sanchez |
Fabrication
Final Design
System Engineering
|
23 Jan 2012 |
| D1102131-v2 |
OBSOLETE |
Eduardo Sanchez |
Fabrication
System Engineering
Final Design
|
23 Jan 2012 |
| D070008-v3 |
ADVANCED LIGO, SUS, QUAD LOWER STRUCTURE, SPACING PLUG |
Joe ODell et al. |
Fabrication
Final Design
System Engineering
|
23 Jan 2012 |
| D1102146-v3 |
OBSOLETE |
Eduardo Sanchez |
Final Design
System Engineering
Fabrication
|
23 Jan 2012 |
| D1102163-v3 |
OBSOLETE |
Eduardo Sanchez |
System Engineering
Final Design
Fabrication
|
23 Jan 2012 |
| D1102132-v2 |
OBSOLETE |
Eduardo Sanchez |
System Engineering
Final Design
Fabrication
|
21 Jan 2012 |
| D1102172-v2 |
OBSOLETE |
Eduardo Sanchez |
Fabrication
System Engineering
Final Design
|
21 Jan 2012 |
| E1200062-x0 |
DCN, REVISED ALIGO, SUS, QUAD TOP STAGE BLADE, WIRE CLAMP SHIM (REDESIGNED) |
Eduardo Sanchez |
Fabrication
Suspensions
Final Design
|
19 Jan 2012 |
| D1102284-v1 |
ALIGO, AOS, VIEWPORT LEAK TEST FIXTURE, PROOF TEST CAP ASSY.FOR MDC 450004 |
Eduardo Sanchez |
Auxiliary Optics
Final Design
Fabrication
|
02 Dec 2011 |
| D1102136-v3 |
Aligo, SUS, QUAD, WIRING HARNESS, OSEM/ESD CABLE CLAMP JAW(REDESIGNED) |
Eduardo Sanchez |
System Engineering
Final Design
Fabrication
|
01 Dec 2011 |
| D1101171-v1 |
ALIGO, VE, VIEWPORT GUARD ASSY., MULTI-PIECE |
Eduardo Sanchez |
Final Design
Auxiliary Optics
Fabrication
|
28 Nov 2011 |
| D1102157-v2 |
ALIGO, AOS,SEPTUM VIEWPORT LEAK TEST FIXTURE ASSY. |
Eduardo Sanchez |
Fabrication
Final Design
Auxiliary Optics
|
17 Nov 2011 |
| D1102135-v2 |
Aligo, SUS, QUAD, SCREW, SHC, 10-32 X 1.25 LG., OSEM/ESD CABLE CLAMP |
Eduardo Sanchez |
Fabrication
Final Design
System Engineering
|
17 Nov 2011 |
| D1102191-v1 |
ALIGO, AOS, VIEWPORT LEAK TEST FIXTURE, PROOF TEST CAP ASSY.FOR CO2P V.P |
Eduardo Sanchez |
Auxiliary Optics
Final Design
Fabrication
|
14 Nov 2011 |
| D1101964-v1 |
aLIGO, AOS, VIEWPORT LEAK TEST FIXTURE, PROOF TEST CAP ASSY. |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
Final Design
|
14 Nov 2011 |
| D1101940-v2 |
ALIGO, AOS, VIEWPORT TEST FIXTURE, SCREW HH CAP |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
Final Design
|
11 Nov 2011 |
| D1101936-v1 |
ALIGO, AOS, VIEWPORT LEAK TEST FIXTURE PROOF TEST CAP ASSY. (HQ V.P) |
Eduardo Sanchez |
Fabrication
Final Design
|
11 Nov 2011 |
| D1102158-v2 |
ALIGO, AOS, SEPTUM VIEWPORT LEAK TEST FIXTURE, LEAD SCREW MT. BLOCK HORIZ. SUPPORT STRUT |
Eduardo Sanchez |
Fabrication
Final Design
Auxiliary Optics
|
11 Nov 2011 |
| D1102155-v2 |
ALIGO, AOS,SEPTUM VIEWPORT LEAK TEST FIXTURE, BASE PLATE |
Eduardo Sanchez |
Fabrication
Final Design
Auxiliary Optics
|
11 Nov 2011 |
| D1102156-v2 |
ALIGO, AOS,SEPTUM VIEWPORT LEAK TEST FIXTURE, PROOF TEST CAP |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
Final Design
Preliminary Design
|
11 Nov 2011 |
| D1101937-v2 |
ALIGO, AOS, VIEWPORT LEAK TEST FIXTURE, BASE PLATE |
Eduardo Sanchez |
Final Design
Auxiliary Optics
Fabrication
|
11 Nov 2011 |
| D1101933-v1 |
ALIGO, AOS, VIEWPORT LEAK TEST FIXTURE, LEAD SCREW MT. BLOCK HORIZ. SUPPORT STRUT |
Eduardo Sanchez |
Auxiliary Optics
Final Design
Fabrication
|
11 Nov 2011 |
| D1101169-v1 |
ALIGO, VE, VIEWPORT GUARD ASSY., FLANGE MT. COUPLER |
Eduardo Sanchez |
Fabrication
Auxiliary Optics
Final Design
|
18 Jul 2011 |
| D1002264-v1 |
ALIGO, OPLEV, PERISCOPE, RING, MIRROR RETAINING |
Ignacio Romero et al. |
Auxiliary Optics
Final Design
|
12 Jul 2011 |
| D1002259-v1 |
ALIGO, OPLEV, PERISCOPE, OPTICAL BOX |
Ignacio Romero et al. |
Auxiliary Optics
Final Design
|
12 Jul 2011 |
| D1100898-v1 |
ALIGO OPLEV PERISCOPE MOUNTING TUBE |
Eduardo Sanchez |
Auxiliary Optics
Final Design
Fabrication
|
12 Jul 2011 |
| D080503-v3 |
ADVANCED LIGO, SUS, THIS, BEAM SPLITTER UPPER STRUCTURE, SHEAR PLATE |
Joe ODell et al. |
Suspensions
|
24 May 2011 |
| D1001620-v3 |
aLIGO AOS OPLEV SENSOR BRACKET |
Craig Conley et al. |
Fabrication
Auxiliary Optics
Final Design
|
03 May 2011 |
| D1100704-v1 |
ALIGO IMASS OFS ADAPTER ASSY., 3/16 HEX |
Eduardo Sanchez et al. |
Fabrication
Final Design
|
26 Apr 2011 |
| D1100703-v1 |
ALIGO IMASS OFS ADAPTER ASSY, 5/16 HEX |
Eduardo Sanchez et al. |
Final Design
Fabrication
|
26 Apr 2011 |
| D1100702-v1 |
ALIGO IMASS OFS ADAPTER ASSY. HEX WRENCH |
Eduardo Sanchez et al. |
Final Design
Fabrication
|
26 Apr 2011 |
| D1100700-v1 |
ALIGO IMASS OFS ADAPTER, 5/16 TO 3/8 SQUARE DRIVE |
Eduardo Sanchez et al. |
Final Design
Fabrication
|
26 Apr 2011 |
| D1100697-v1 |
ALIGO I MASS OFS ADAPTER, 3/16 TO 3/8 SQ. DRIVE |
Eduardo Sanchez et al. |
Fabrication
Final Design
|
26 Apr 2011 |
| E1100386-x0 |
DCN, INITIAL RELEASE OF IMASS OFS 5/16 AND 3/16 HEX, OFS ADAPTERS |
Eduardo Sanchez et al. |
Fabrication
Final Design
|
22 Apr 2011 |
| D1100760-v2 |
BSC CLEANING TEST PLATE |
Jeffrey Lewis et al. |
Fabrication
Seismic Isolation
|
22 Apr 2011 |